60/40 seat install ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muckyp · 11-02-2013, 11:02 PM

I am trying to install a 94 60/40 seat in my '70. Can someone post up a pic of how and where they placed the inside bracket of the passenger side seat. Mine seems to want to be placed on the high spot on the trans hump. I'm sure I have seen an install thread somewhere, but I cannot find it. Thanks.

PAWS 72 · 11-03-2013, 12:06 AM

Quote:

Originally Posted by muckyp

I am trying to install a 94 60/40 seat in my '70. Can someone post up a pic of how and where they placed the inside bracket of the passenger side seat. Mine seems to want to be placed on the high spot on the trans hump. I'm sure I have seen an install thread somewhere, but I cannot find it. Thanks.

Would it not give a little reclining to it if it was like that. Have you set in it that way. looking for more info also

Andy4639 · 11-03-2013, 07:59 AM

That's how I did mine. I used a small pipe nipple to hold the front up. 4-6" nipple I think bought at lowes. I don't have any pictures of the pipe but of the seat.

70chev383 · 11-03-2013, 11:20 AM

I placed it in the same spot, but I had to move were the slider locked in and I lower the seats by 3/4 of an ich so I could look through the windshield properly

muckyp · 11-03-2013, 11:51 AM

Thanks for the replies guys. Just so I am clear, you guys placed the front, inside passenger side bracket up on the hump that I marked in red? And drilled your hole where the yellow dot is?

Andy4639 · 11-03-2013, 12:14 PM

My gas tank is gone out of the cab and I have the top of the seat up against the back cab wall.
Best I can do.

muckyp · 11-03-2013, 01:11 PM

Thanks. My tank is out too. I see that you have a gap between your seats. I was planning on having them together. Thanks again for your help.

Andy4639 · 11-03-2013, 02:19 PM

Quote:

Originally Posted by muckyp

Thanks. My tank is out too. I see that you have a gap between your seats. I was planning on having them together. Thanks again for your help.

U could slide them closer together but I like the room to put things when I'm traveling to get them out of sight.

mmiddle · 11-03-2013, 02:27 PM

Quote:

Originally Posted by Andy4639

U could slide them closer together but I like the room to put things when I'm traveling to get them out of sight.

R-i-g-h-t!!!!

11-02-2013, 11:02 PM	#1
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	60/40 seat install ?? I am trying to install a 94 60/40 seat in my '70. Can someone post up a pic of how and where they placed the inside bracket of the passenger side seat. Mine seems to want to be placed on the high spot on the trans hump. I'm sure I have seen an install thread somewhere, but I cannot find it. Thanks. Attached Images __________________ 70 SWB 454/TH400

11-03-2013, 07:59 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 60/40 seat install ?? That's how I did mine. I used a small pipe nipple to hold the front up. 4-6" nipple I think bought at lowes. I don't have any pictures of the pipe but of the seat. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-03-2013, 11:20 AM	#4
70chev383 Registered User Join Date: Dec 2012 Location: manitoba Posts: 94	Re: 60/40 seat install ?? I placed it in the same spot, but I had to move were the slider locked in and I lower the seats by 3/4 of an ich so I could look through the windshield properly

11-03-2013, 11:51 AM	#5
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: 60/40 seat install ?? Thanks for the replies guys. Just so I am clear, you guys placed the front, inside passenger side bracket up on the hump that I marked in red? And drilled your hole where the yellow dot is? Attached Images __________________ 70 SWB 454/TH400

11-03-2013, 12:14 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 60/40 seat install ?? My gas tank is gone out of the cab and I have the top of the seat up against the back cab wall. Best I can do. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-03-2013, 01:11 PM	#7
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: 60/40 seat install ?? Thanks. My tank is out too. I see that you have a gap between your seats. I was planning on having them together. Thanks again for your help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.