![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2009
Location: Lloydminster Alberta
Posts: 32
|
Lower control arm question
Hello I have a 69 gmc 3/4 ton and I am looking for a new lower control arm for it. I am trying to order one through Lmc but they only list one for 71-72. Do you know if it will work on my 69? I've asked around and tried searching but have come up dry. Some assistance would be greatly appreciated.
Thank you |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2007
Location: Topeka,KS
Posts: 778
|
Re: Lower control arm question
The differences in the lower control arms are the spindle turn stops. Drum and disc are different. Technically the 71-87 are the same. Is yours bent?
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member). |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2009
Location: Lloydminster Alberta
Posts: 32
|
Re: Lower control arm question
Ok. So will I be able to get away with using the 71-72 control arm I just might have to modify the steering stops? Grind them down a bit or weld something on maybe? No mine isn't bent. The long bolt with the double threaded nuts came loose and pounded the control arm right out. Thats about the best way I can explain it.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2012
Location: Arlington Washington
Posts: 1,808
|
Re: Lower control arm question
I'd get some used one. A small membership fee and you can post a wanted add in the parts section. Good old used genuine gm parts will beat lmc re pops
__________________
Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2007
Location: Topeka,KS
Posts: 778
|
Re: Lower control arm question
I take it you have drums? You will need to use a ball joint for drum spindles. Why not find a used one?
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member). |
![]() |
![]() |
![]() |
Bookmarks |
|
|