Just Bought My Last Aftermarket Trim

[magwakeenercew2jh]

Messing with the windshield trim had me taking a look at the possibility of running the trim from the lower-rear of the windows around
the back of the cab.

I looked on a familiar site that sells parts. Not to hack at them, but the company name has three letters in it that starts with "L".
Fair enough. About $50 with shipping...even though they insist on sending everything with all that damnable styro popcorn in the box...
I went for it.

This morning I pulled the trim out of the box...along with 2 sq yds of the white stuff...Unwrapped it. "Gotta protect the new paint"....
...Carefully slapped some blue tape on it. Slapped some blue tape on the cab.

Held it up.

There was not ONE PLACE...(okay, maybe one or two) ...that the trim laid flat on the cab or met the cab's corner radius. I said to myself,
"Be patient". "It was only fifty bucks." "Bend it a little". "Slowly." "Slowly." "Slowly."

An hour later, I said "What the *&%* am I doing with this crap?" "It looks like crap." "In my hands, and on MY truck, it'll always look like crap."

No more aftermarket trim for me.

[Ol Blue K20]

At least your language was cleaner than most, but that seems to be the consensus for most of their (no name) products....

[54blackhornet]

It's cool you can vent without getting scolded like a child ! I believe down the road all special interest vehicles will be valued for being original, not rebuilt using inferior parts. I like the brief cases in your bed sharp idea

[leftybass209]

By all means tell people it's LMC trim, don't be discreet about it. It's unfortunate that someone has to be the bearer of bad news but it saves many the heartache and can be beneficial to any company with an open ear that needs feedback on their products. Maybe you just got a bad one, but quality control should be paramount at a company.

[elf w/capital T]

Originally Posted by leftybass209

By all means tell people it's LMC trim, don't be discreet about it. It's unfortunate that someone has to be the bearer of bad news but it saves many the heartache and can be beneficial to any company with an open ear that needs feedback on their products. Maybe you just got a bad one, but quality control should be paramount at a company.

Not anymore!! Now days you cant even order a simple cheese burger with no onions, you get a burgeer WITH ONIONS and NO CHEESE. People suck now days, companies are just trying to make profit, workers don't want to work, they just want a paycheck.


Its sad but true. Thank you for the review, I was going to makemy purchase for the same trim by LMC....noooootttt annnyyyymoreee....WE DO APPRECIATE your write up!!

[Lattimer]

I've had nothing but bad luck with stuff from LMC. I won't buy anything from them anymore unless they are the only source i can find.


I wish I would have known that before I bought many of things I got from them.

[lolife99]

Mar-K is a good source for trim.

[Lee H]

Originally Posted by lolife99

Mar-K is a good source for trim.

Yes, I used Mar-K for my lower trim and paint divider trim and it fit very well. In fact the fit and finish was way better than the NOS stuff I had bought.

[magwakeenercew2jh]

Originally Posted by Lee H

Yes, I used Mar-K for my lower trim and paint divider trim and it fit very well. In fact the fit and finish was
way better than the NOS stuff I had bought.

After looking at some good quality stuff on the side of one of Rene's rides, I decided to give it a shot with Mar-K.

The order for the paint divider (around the back of the cab) was $36...which included 12 screw-in studs at $.25 ea.

The shipping cost was (going to be) $33, including a $10 "handling charge"......Whoa!!!! At that point in the ordering, since I was going to use a
debit card (I saw no method on the site of paying with Paypal...understandable with Paypal's nasty fees), the prompt said,
"We'll call you for a credit card number".

Before they could do that, I wrote their info email addy and explained that the shipping charges were too high for such a small order.

Vicky wrote back and said the computer had made a mistake and charged me for two boxes (the studs, I guess), and that the new shipping
cost was $27 (including a $10 "handling fee").

I wrote back and thanked her for the attention to this, but that $27 for a $36 purchase was too much for me to get "fuzzy" over. I told her I
recognized it was a cost that they had to pass on, and that it would probably be more palatable if I had a larger order. She was nice, responsive,
and understood.

No trim for me. No big deal. I like the back of the cab the way it is now, anyway. Sometimes, "plain" is better.

[71K20chevy]

Originally Posted by magwakeenercew2jh

After looking at some good quality stuff on the side of one of Rene's rides, I decided to give it a shot with Mar-K.

The order for the paint divider (around the back of the cab) was $36...which included 12 screw-in studs at $.25 ea.

The shipping cost was (going to be) $33, including a $10 "handling charge"......Whoa!!!! At that point in the ordering, since I was going to use a
debit card (I saw no method on the site of paying with Paypal...understandable with Paypal's nasty fees), the prompt said,
"We'll call you for a credit card number".

Before they could do that, I wrote their info email addy and explained that the shipping charges were too high for such a small order.

Vicky wrote back and said the computer had made a mistake and charged me for two boxes (the studs, I guess), and that the new shipping
cost was $27 (including a $10 "handling fee").

I wrote back and thanked her for the attention to this, but that $27 for a $36 purchase was too much for me to get "fuzzy" over. I told her I
recognized it was a cost that they had to pass on, and that it would probably be more palatable if I had a larger order. She was nice, responsive,
and understood.

No trim for me. No big deal. I like the back of the cab the way it is now, anyway. Sometimes, "plain" is better.

Don't mean to hijack but your truck is beautiful.

[magwakeenercew2jh]

Originally Posted by 71K20chevy

Don't mean to hijack but your truck is beautiful.

Hahahahaha!!!!

First time we consider a compliment like that a "hijack", we're all in trouble.



Thanks a lot, 71K20.

[alsriv2]

Thank you for letting us know of another bad experience with the purveyors of Chinese made junk.

[In The Ten Ring]

So many bad stories about LMC....the side mirrors and door handles I got from them fit and work fine but the chrome is junk.

Their foot pedal pads are fine though.

Their tailights for a stepside are fine too.

[67ctener]

I ordered bbc mounts and the supplied bolts hit the block... They were $200 for 2 mounts!

[oklalawnboy]

I am very pleased with the Mar-K trim I bought. Shipping is high, have you seen the price of diesel lately........ It sucks! BTW, your truck looks awesome!!

[FRENCHBLUE72]

Nice truck got any more pics? I have had nothing but bad luck with lmc... I have had good luck from mar-k...

[Jurassic-1]

I built a truck for someone. He purchased LMC parts . The side trim was less rigid than an aluminum can . The visor rods came with directions to bend rod to keep visors from falling down. With all the technology we have today why cant aftermarket parts be reproduced better than 1970? I purchased 2 short wide upper and lower side molding sets that were NOS and they both were missing the fender spears. I purchased the spears from Mar-k and you would be hard pressed to tell the difference from NOS.

[bigmac73]

[QUOTE=Jurassic-1;6356540] With all the technology we have today why cant aftermarket parts be reproduced better than 1970?


because nothing is made in the USA anymore, we have been sold out by the corporate greed for a cheaper product,

[Jurassic-1]

I would like to think if we have companies where quality matters such as Mar-K and people take notice hopefully it will force the others to produce quality or resort to the manufacturing of packing peanuts or paper drink umbrellas. This is my opinion.

[Tom Vogel]

[QUOTE=, we have been sold out by the corporate greed for a cheaper product,[/QUOTE]

Do you ever shop at Wal Mart?

[bigmac73]

Originally Posted by Tom Vogel

Do you ever shop at Wal Mart?

not anymore, old man sam walton must have flipped in his grave 50 times, when his kids trashed the company

[magwakeenercew2jh]

Originally Posted by FRENCHBLUE72

Nice truck got any more pics? I have had nothing but bad luck with lmc... I have had good luck from mar-k...

Thanks.

http://67-72chevytrucks.com/vboard/s...92#post6356792

[DT1]

I will use LMC ONLYwhen I've exhausted all other possibilities. I have never been happy with the quality of anything they sell, especially anything made out of rubber. The packing peanuts also drive me nuts. I even complained about it, but it fell on deaf ears.

[Lee H]

It's not corporate greed that's making cheap parts, it's the consumers demand for a cheaper product. Most folks looking for a part for a driver just don't want to spend the money for a high quality product, that's why the LMCs of the world thrive.

[Jurassic-1]

you are right, That is why this site is a great tool to find NOS and road tested factory parts