Anybody here with tricked out chevy 6 cylinders? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TJ's Chevy · 11-07-2013, 12:23 PM

Hey there, My name is T.J. and I am from the 60-66 chevy trucks board. There we have a thread entitled "Tricked out chevy 6 cylinders" thought it would be neat to see one here to, if there isn't one already. But I would love to see some and just for fun I will start with mine. 1966 chevy 292. Thanks.

TJ's Chevy · 11-07-2013, 12:25 PM

Here's another....

18tahoe · 11-07-2013, 01:29 PM

OrrieG · 11-07-2013, 08:27 PM

Quote:

Originally Posted by 18tahoe

Nice looking engine, but please take some time to clean up that wiring on the battery, looks like a short ready to burn it to the ground.

Highsider · 11-07-2013, 09:58 PM

Quote:

Originally Posted by OrrieG

Nice looking engine, but please take some time to clean up that wiring on the battery, looks like a short ready to burn it to the ground.

Orrie- I thought it was a photo of mine! (except I have a 350).

OrrieG · 11-08-2013, 02:41 PM

Quote:

Originally Posted by Highsider

Orrie- I thought it was a photo of mine! (except I have a 350).

I had one bad experience with mine when I had the wrong battery box that put the battery too high.. some hard off roading, sheared hold down bolt and battery contact with the hood made for an interesting afternoon. Luckily it just burnt some wire and did not destroy any igition parts. I get concerned when I see wires draped over metal that can heat up.

Looking at the photo it is probably a project still in the works since the terminal is disconnected and wiring is temporary.

lowrodderchev · 11-10-2013, 03:53 PM

Quote:

Originally Posted by T.J. MCCAULEY

Here's another....

that's one sexy motor

RusteeNutz · 11-07-2013, 08:20 PM

Very nice!

OrrieG · 11-07-2013, 08:25 PM

check out inliners.org

TJ's Chevy · 11-07-2013, 08:27 PM

Quote:

Originally Posted by 18tahoe

That's a beautiful 6! Nice job!

Quote:

Originally Posted by OrrieG

check out inliners.org

Thanks, I've been there many a time!

mechanixman · 11-07-2013, 10:32 PM

I know it's not much, but here was my 216 after I cleaned it up.

18tahoe · 11-07-2013, 10:46 PM

Orrie I assume you just having some fun, truck not wired completely in that photo.

**Dan in Pasadena** · 11-08-2013, 01:02 AM

I've posted this one before. It's not mine, it used to belong to member, N2Billet. It's a 250 and was in a '67-'68 short fleet he used to own. I'm still very impressed by it.

If my '55 had come with a straight six I'd have kept it and dolled it up as close to this as I could have. They're just unique anymore and cool to own

dubie · 11-08-2013, 10:31 AM

nice engines boys. I almost hot rodded out a 250 inline for my 56 because it's so out of the norm to see one with an inline still in it. There's nothing more I love than walking up to a car or truck at a show and seeing something different under the hood

NEWFISHER · 11-08-2013, 02:57 PM

27,000 miles on this one since December. 250, milled and lump ported head, Z28 beehive springs, 194 exhaust, cam, balanced, HEI, 12mm wires and hotter coil, Clifford 6=8 heated, Holley 390, Langdon cast headers, 2 1/2 all the way back through a Magnaflow.
It's the " Buzzen half Dozen"!

**Denee007** · 11-08-2013, 09:19 PM

I didn't know a 6cyl. could look so FINE! It leaves an incredible amount of room!

53 Jimmy · 11-09-2013, 07:35 AM

Any GMC 6 bangers out there done up? aka the long block

eagleuh1 · 11-10-2013, 02:11 PM

Pic of as now.

eagleuh1 · 11-10-2013, 02:10 PM

Waiting on the GMC 6 cyl. I have a 270 with the better head in my 450 GMC firetruck I'm wanting to hop up a little. So far just converted to 12 volt and put Pertronix Ignition and coil in. Haven't cleaned up much other than hose off.

Zach B · 11-12-2013, 12:02 AM

Don't have any pics nor is it tricked out yet. I have in my poses in a 292 I want to setup for a 49 fastback.

53 Jimmy · 11-12-2013, 12:47 PM

here' mine its a 228 havent done anything yet other than get it to run... all she needed was fresh gas .. I used a one gallon jug and she fired right up ... its been sitting since 92

53 Jimmy · 11-12-2013, 12:50 PM

other side

diceman50 · 11-13-2013, 10:35 PM

Here's my 235 with EFI.

Name: 20130610_125250.jpg
Views: 637
Size: 55.5 KB

Name: 20130610_125336.jpg
Views: 607
Size: 56.5 KB

Name: 20130610_125320.jpg
Views: 593
Size: 46.8 KB

TJ's Chevy · 11-13-2013, 10:42 PM

Nice 235!

NEWFISHER · 11-14-2013, 12:32 PM

Quote:

Originally Posted by diceman50

Here's my 235 with EFI.

Attachment 1174525

Attachment 1174527

Attachment 1174528

that's soooooo KOOL!

11-07-2013, 12:23 PM	#1
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Anybody here with tricked out chevy 6 cylinders? Hey there, My name is T.J. and I am from the 60-66 chevy trucks board. There we have a thread entitled "Tricked out chevy 6 cylinders" thought it would be neat to see one here to, if there isn't one already. But I would love to see some and just for fun I will start with mine. 1966 chevy 292. Thanks. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-07-2013, 12:25 PM	#2
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? Here's another.... Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-07-2013, 01:29 PM	#3
18tahoe Registered User Join Date: Feb 2012 Location: lake tahoe ca Posts: 34	Re: Anybody here with tricked out chevy 6 cylinders?

11-07-2013, 08:20 PM	#8
RusteeNutz Registered User Join Date: Oct 2013 Location: Sacramento, CA. Posts: 26	Re: Anybody here with tricked out chevy 6 cylinders? Very nice!

11-07-2013, 08:25 PM	#9
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Anybody here with tricked out chevy 6 cylinders? check out inliners.org __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

11-07-2013, 10:32 PM	#11
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Re: Anybody here with tricked out chevy 6 cylinders? I know it's not much, but here was my 216 after I cleaned it up. Attached Images __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page

11-07-2013, 10:46 PM	#12
18tahoe Registered User Join Date: Feb 2012 Location: lake tahoe ca Posts: 34	Re: Anybody here with tricked out chevy 6 cylinders? Orrie I assume you just having some fun, truck not wired completely in that photo.

11-08-2013, 01:02 AM	#13
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,341	Re: Anybody here with tricked out chevy 6 cylinders? I've posted this one before. It's not mine, it used to belong to member, N2Billet. It's a 250 and was in a '67-'68 short fleet he used to own. I'm still very impressed by it. If my '55 had come with a straight six I'd have kept it and dolled it up as close to this as I could have. They're just unique anymore and cool to own Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

11-08-2013, 10:31 AM	#14
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Re: Anybody here with tricked out chevy 6 cylinders? nice engines boys. I almost hot rodded out a 250 inline for my 56 because it's so out of the norm to see one with an inline still in it. There's nothing more I love than walking up to a car or truck at a show and seeing something different under the hood __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

11-08-2013, 02:57 PM	#15
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Anybody here with tricked out chevy 6 cylinders? 27,000 miles on this one since December. 250, milled and lump ported head, Z28 beehive springs, 194 exhaust, cam, balanced, HEI, 12mm wires and hotter coil, Clifford 6=8 heated, Holley 390, Langdon cast headers, 2 1/2 all the way back through a Magnaflow. It's the " Buzzen half Dozen"!

11-08-2013, 09:19 PM	#16
Denee007 Senior Member Join Date: May 2011 Location: Cypress, Tx. Posts: 1,504	Re: Anybody here with tricked out chevy 6 cylinders? I didn't know a 6cyl. could look so FINE! It leaves an incredible amount of room! __________________ '72 Ford Bronco project(July 17 2021-?) https://67-72chevytrucks.com/vboard/...d.php?t=828015 59 Apache (sold 6-25-2021) 67 Ford Mustang (re-restored after Harvey) 1968 Jeep Cj5 (2-8-2020 to present) 1992 Jeep Yj (8-17-20 to present) (Jurassic build) www.Classiccarsandtools.com

11-09-2013, 07:35 AM	#17
53 Jimmy Registered User Join Date: Aug 2013 Location: Long Island,NY Posts: 29	Re: Anybody here with tricked out chevy 6 cylinders? Any GMC 6 bangers out there done up? aka the long block

11-10-2013, 02:11 PM	#18
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Anybody here with tricked out chevy 6 cylinders? Pic of as now. Attached Images

11-10-2013, 02:10 PM	#19
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Anybody here with tricked out chevy 6 cylinders? Waiting on the GMC 6 cyl. I have a 270 with the better head in my 450 GMC firetruck I'm wanting to hop up a little. So far just converted to 12 volt and put Pertronix Ignition and coil in. Haven't cleaned up much other than hose off.

11-12-2013, 12:02 AM	#20
Zach B Registered User Join Date: Jun 2013 Location: El Dorado Springs Missouri Posts: 246	Re: Anybody here with tricked out chevy 6 cylinders? Don't have any pics nor is it tricked out yet. I have in my poses in a 292 I want to setup for a 49 fastback.



Register or Log In To remove these advertisements.

11-12-2013, 12:47 PM	#21
53 Jimmy Registered User Join Date: Aug 2013 Location: Long Island,NY Posts: 29	Re: Anybody here with tricked out chevy 6 cylinders? here' mine its a 228 havent done anything yet other than get it to run... all she needed was fresh gas .. I used a one gallon jug and she fired right up ... its been sitting since 92 Attached Images

11-12-2013, 12:50 PM	#22
53 Jimmy Registered User Join Date: Aug 2013 Location: Long Island,NY Posts: 29	Re: Anybody here with tricked out chevy 6 cylinders? other side Attached Images

11-13-2013, 10:35 PM	#23
diceman50 Registered User Join Date: Nov 2013 Location: Midland, Texas Posts: 203	Re: Anybody here with tricked out chevy 6 cylinders? Here's my 235 with EFI.

11-13-2013, 10:42 PM	#24
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? Nice 235! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

Register or Log In To remove these advertisements.