|
|
|
07-13-2003, 11:28 PM
|
#1 |
|
Registered User
Join Date: Jul 2003
Location: Omaha NE
Posts: 4
|
tie-rod bar question
Is the actual tie rod bar supposed to have a slight bend, or should it be perfectly straight. My bar bows towards the front of the truck. Thanks for your help!
|
|
|
|
07-14-2003, 12:34 PM
|
#2 |
|
Senior Member
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
You mean the drag link? The bar with the 4 holes that connect to both tie rods, the idler, and the pitman? If so yes it's straight between the inner two holes, but it bends at about 10-15 degrees on the ends to the outer holes.
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
|
|
07-14-2003, 07:07 PM
|
#3 |
|
Registered User
Join Date: Jul 2003
Location: Omaha NE
Posts: 4
|
Thanks for your help. That is it. I guess I did't know it was called a drag link.
|
|
|
|
|
07-14-2003, 08:15 PM
|
#4 |
|
Senior Member
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
Cool. Make sure if you're taking it out you remember how it goes back in. I made a little mark next to the pitman arm stud hole (arrow pointing up) that told me how it went back in the truck. Not too many of the pictures i've seen really show how it's supposed to go...
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
