WA Big block power steering pulleys and brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ctener · 11-17-2013, 08:55 PM

Big block pulleys and brackets removed from a 71 factory 402 big block. 2 of the pulleys were hot tanked with my motor but all will clean up nice. Pumps spins freely. $180 shipped for all. I'd prefer not to separate. Thanks, Scott.

**bcnya2** · 11-17-2013, 09:45 PM

Any difference for a '72? Is anything missing?

Thanks,
Greg

67ctener · 11-17-2013, 09:47 PM

Im guessing no difference but not positive. I'm pretty sure this is it but maybe a pro will chime in

**Classic Bowties** · 11-17-2013, 11:19 PM

Just as an FYI, that pictured pair of crank pulleys (lower left) look alot like swp small block pulleys, the outer crank p/s add on pulley looks like a 1232 and I cannot tell by your picture if the inner crank pulley is a 5820 single or 4043 double groove, but if you post the stamped p/n's I can confirm what you may have for sure. Mel

67ctener · 11-18-2013, 12:08 AM

Pulley 1

67ctener · 11-18-2013, 12:10 AM

Pulley 2

**Classic Bowties** · 11-18-2013, 05:19 PM

Quote:

Originally Posted by 67ctener

Pulley 1

Quote:

Originally Posted by 67ctener

Pulley 2

Hey Scott, your two added pics are showing/confirming what I had said in above post #4. Mel

67ctener · 11-18-2013, 08:08 PM

So are they incorrect?

67ctener · 11-20-2013, 01:31 PM

TTt. Not sure about the crank pulleys? From what Mel said they are small block? Idk why there would be sb pulleys on the big blok setup unless there the same. This is what the motor had when running. Will part, I imagine the only desired thing is the ps setup. I'll do 150 shipped

**uncle** · 11-22-2013, 07:35 PM

125 shipped?

**uncle** · 11-26-2013, 04:25 PM

Pulley on ps wobble? Can I get closer pics of pump neck area?

**tll74** · 11-26-2013, 05:17 PM

The SBC pulleys will bolt on a BBC but they will not center correctly. The ID of the center hole in the balancer is much larger on the BBC.

67ctener · 11-26-2013, 05:51 PM

They were on the motor when I bought it. As far as wobble im not sure. If there incorrect I don't want to sell them

**uncle** · 11-26-2013, 06:08 PM

I'm talking about pulley that's on the ps pump. You can spin it to see if it has wobble

67ctener · 11-26-2013, 08:16 PM

I'll check when I get home

67ctener · 11-27-2013, 12:44 AM

Pump and pulley spin nice no wobble

**uncle** · 11-27-2013, 03:34 PM

Ill give 275 shipped for these parts and drop shocks.

67ctener · 11-27-2013, 04:26 PM

I can do that. Scottbenway17@yahoo.com for paypal

**uncle** · 11-27-2013, 07:06 PM

Pm sent.

11-17-2013, 08:55 PM	#1
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Big block power steering pulleys and brackets Big block pulleys and brackets removed from a 71 factory 402 big block. 2 of the pulleys were hot tanked with my motor but all will clean up nice. Pumps spins freely. $180 shipped for all. I'd prefer not to separate. Thanks, Scott. Attached Images __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-17-2013, 09:45 PM	#2
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Big block power steering pulleys and brackets Any difference for a '72? Is anything missing? Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

11-17-2013, 09:47 PM	#3
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets Im guessing no difference but not positive. I'm pretty sure this is it but maybe a pro will chime in __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-18-2013, 12:08 AM	#5
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets Pulley 1 Attached Images __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-18-2013, 12:10 AM	#6
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets Pulley 2 Attached Images __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-17-2013, 11:19 PM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,621	Re: Big block power steering pulleys and brackets Just as an FYI, that pictured pair of crank pulleys (lower left) look alot like swp small block pulleys, the outer crank p/s add on pulley looks like a 1232 and I cannot tell by your picture if the inner crank pulley is a 5820 single or 4043 double groove, but if you post the stamped p/n's I can confirm what you may have for sure. Mel

11-18-2013, 08:08 PM	#8
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets So are they incorrect? __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-20-2013, 01:31 PM	#9
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets TTt. Not sure about the crank pulleys? From what Mel said they are small block? Idk why there would be sb pulleys on the big blok setup unless there the same. This is what the motor had when running. Will part, I imagine the only desired thing is the ps setup. I'll do 150 shipped __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-22-2013, 07:35 PM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big block power steering pulleys and brackets 125 shipped?

11-26-2013, 04:25 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big block power steering pulleys and brackets Pulley on ps wobble? Can I get closer pics of pump neck area?

11-26-2013, 05:17 PM	#12
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Big block power steering pulleys and brackets The SBC pulleys will bolt on a BBC but they will not center correctly. The ID of the center hole in the balancer is much larger on the BBC. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-26-2013, 05:51 PM	#13
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets They were on the motor when I bought it. As far as wobble im not sure. If there incorrect I don't want to sell them __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-26-2013, 06:08 PM	#14
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big block power steering pulleys and brackets I'm talking about pulley that's on the ps pump. You can spin it to see if it has wobble

11-26-2013, 08:16 PM	#15
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets I'll check when I get home __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-27-2013, 12:44 AM	#16
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets Pump and pulley spin nice no wobble __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly



Register or Log In To remove these advertisements.

11-27-2013, 03:34 PM	#17
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big block power steering pulleys and brackets Ill give 275 shipped for these parts and drop shocks.

11-27-2013, 04:26 PM	#18
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Big block power steering pulleys and brackets I can do that. Scottbenway17@yahoo.com for paypal __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-27-2013, 07:06 PM	#19
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big block power steering pulleys and brackets Pm sent.

Register or Log In To remove these advertisements.