|
07-15-2003, 10:15 PM | #1 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Parts for sale
I have many parts still for sale. Heres a partial list.
67 hood that has a slight bow in the middle 50 Rearend, 12 bolt open with 3.73... 75 complete Steering colum, non tilt, manual shift, good shape. 50 lots of west coast stlye mirrors 20 a pair grill loops off a driver. have a dent, only two i believe 30 pair ALUMINUM headlight benzels for a 67-68 30 Steel headlight benzels, NO DENTS.. 20 3 complete dashes out of various 67-72 trucks. All worked when pulled. 20 a dash Radio delete.. a small ding 10 Engine harness for a 68 v8, manual... 20 bucks 67 front fender, NO RUST... one small dent after wheel 50 new flywheel and new HD clutch... (20 miles from new)... 120????? Heater housing and fan and core complete.... 50 HEI dizzy with wires and new cap, rotor... 65 2 Windshelild wiper tanks and brackets... 10 Heater vents... black .. 5 a peice ebrake for a 67, 68.. works fine, includes cable that goes to frame out of the cab... 40? Make an offer if you think it to much... email me @ nt_expert@hotmail.com with questions. Ill post more later, if you need it email me and ill look. I dont have any exotic items.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-15-2003, 10:22 PM | #2 |
Registered User
Join Date: Mar 2002
Location: Floodwood Minnesota
Posts: 1,057
|
fender
Is the fender for the passenger side. And how small is the dent?
__________________
1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison. |
07-15-2003, 10:50 PM | #3 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
The fender is for the drivers side and the dent is about the size a golf ball in diameter... but not near as deep. The inner fender covers part of it up its that close to the inside.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-16-2003, 10:34 PM | #4 |
Senior Member
Join Date: Feb 2003
Location: Las Vegas, NV
Posts: 750
|
Are the steel headlight bezels for 67' 68'? If so I may be interested.
|
07-17-2003, 12:23 AM | #5 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
The steel headlight benzels are for a 67-68. They are currently painted white, but will need to be repainted.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-17-2003, 03:01 PM | #6 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
I emailed ppl about the brake, appears to be sold. ANYONE?
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-17-2003, 03:12 PM | #7 |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
If the HEI is in known working condition and complete, how about $45 plus ride? Let me know.
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
07-17-2003, 09:43 PM | #8 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Um do you want the wires and everything. Its got header wires on it that worked excellent and it is know working. I pulled it about a week ago and went to points.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-17-2003, 10:27 PM | #9 |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
I'll take plug wires if they comes with it for $45. Definately want the cap and rotor. My zip is 03580 to figure shipping.
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
07-18-2003, 07:38 PM | #10 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
CPNE you have a PM, anyone else?
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-22-2003, 07:34 PM | #11 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
CPNE, ill figure everything up, ttttt.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-22-2003, 08:17 PM | #12 |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
One question I did not ask. This is an HEI for a V8, correct? Thanks
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
07-23-2003, 07:30 PM | #13 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
CPNE, the dizzy is for a v8. I have sold a set of mirrors, and brake. the prices are neg. so please ask!?!?!. Thanks nt_expert@hotmail.com
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
07-23-2003, 08:25 PM | #14 |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
sounds good, lets get the deal done. I pm'd you a few days ago with offer and ZIP to figure the shipping cost. Let me know.
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
Bookmarks |
|
|