![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Need help steering shaft repair
I am redoing my steering column and noticed that the rubber boot on the steering shaft [the rubber boot that holds grease in the slip joint] has failed and the slip joint is worn. I want to know if I should cut the shaft and replace the the slip joint with a 3/4 36 spline x 3/4 dd coupler or does a universal joint need to be installed. I will be drilling the shear pins out of the shaft so i will have a slip point. Any pics of modified shafts would be great. Thanks
1971 c 10 manual steering
__________________
Fuzzy |
![]() |
![]() |
![]() |
#2 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,515
|
Re: Need help steering shaft repair
Quote:
If I were you I would just find a good stock replacement one... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: Need help steering shaft repair
ttt
__________________
Fuzzy |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: Need help steering shaft repair
Well some time has gone by and I have removed and body worked the shifter bowl to make it smooth and got the steering column stripped and painted and it is looking good. I did pick up a u joint that is a direct fit and looks good to. Next I sent the slip shaft with my buddy to mill it dd all the way so I can cut it to the proper length. Here is a few pics
__________________
Fuzzy |
![]() |
![]() |
![]() |
#5 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,127
|
Re: Need help steering shaft repair
Looks nice, should work real nice
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: Need help steering shaft repair
Thanks Dale the old joint had lots of play and I did not like the grease running out of the boot on my fenderwells
__________________
Fuzzy |
![]() |
![]() |
![]() |
#7 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,127
|
Re: Need help steering shaft repair
If you replace the rag joint with a new one the steering should feel nice and tight. Some people replace the rag with a u joint as well but in my opinion that lets to much vibration to be felt at the steering wheel.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2014
Location: republic, mo
Posts: 57
|
Re: Need help steering shaft repair
How do people hook up the second u joint instead of rag joint? Does it take out more play than a new rag joint?
|
![]() |
![]() |
![]() |
#9 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Re: Need help steering shaft repair
Here's what I use on my trucks, early to mid 90s Jeep Cherokee steering shafts, it's almost a bolt in. You will have to heat and collapse the shaft just a little and on the columns shaft you will need to grind or file a very small notch to clear the Jeeps pinch bolt. The Jeeps shaft has a built in vibration damper and I've found this setup really helps firm up the Chevys steering. Practically a bolt in for around 30 bucks from a salvage yard.
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 05-11-2014 at 11:12 PM. |
![]() |
![]() |
![]() |
#10 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Re: Need help steering shaft repair
Another
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
![]() |
![]() |
![]() |
#11 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Re: Need help steering shaft repair
One more
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jan 2007
Location: Topeka,KS
Posts: 778
|
Re: Need help steering shaft repair
Wow! Great information! Thanks!
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member). |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2014
Location: republic, mo
Posts: 57
|
Re: Need help steering shaft repair
Does the universal joint slide all the way on column end until bottoms out or until flush with inside hole? Hopefully that makes sense. Lol
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2016
Location: Corpus Christi, Texas
Posts: 51
|
Re: Need help steering shaft repair
Digging up an old bone but very appropriate to my question. Blazerman's photos give reference. Jeep splines are 3/4 -36? and the other is 3/4 DD? Like Borgeson unit but price is a bit steep.
Leadbelly |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Feb 2014
Location: Los Angeles area :(
Posts: 499
|
Re: Need help steering shaft repair
I believe to. I have an XJ shaft on my Blazer and C10. Around here, they are about $6 from the yards. Most of the time the rubber at the top is worn and sloppy, so I weld it. Amazon sells new shafts for $99 last I saw. They are on most square body Cherokees, not the Grand Cherokee. 80s- early 90s
I've probably used or sold 20 of them.
__________________
'68 C10 SWB '85 K30 Blazer |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2016
Location: Oklahoma City, OK
Posts: 1
|
Re: Need help steering shaft repair
Just wanted to say thanks for the info. This is exactly what I was looking for. Best 10$ spent so far.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
|
Re: Need help steering shaft repair
Does the Jeep steering shaft mod only work for manual steering boxes
__________________
1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294 |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2016
Location: Corpus Christi, Texas
Posts: 51
|
Re: Need help steering shaft repair
My guess, top yeah, double "D" and 3/4". As far as steering box do not know the spline count so no idea.
Leadbelly |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
|
Re: Need help steering shaft repair
I got the steering shaft but it does not work for a 72 4x4 with power steering. I thought this worked for all 67-72. If so wondering what I might be missing.
__________________
1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: Need help steering shaft repair
How many splines on your power steering box?
__________________
1968 LWB C20 / AC / Wood Bed |
![]() |
![]() |
![]() |
Bookmarks |
|
|