![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Sep 2009
Location: menifee california
Posts: 788
|
front clip removal
has any one put this on here I looked in the faq section but could not fin anything. going to replace my engine and want to remove front clip. when this is done do you remove the inner fenders also ? this is not a total tear down just replacing the motor. thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,855
|
Re: front clip removal
You don't need to remove clip to swap motor. I always pull the radiator and Hood. The side elbows need to come off to get to the top fender bolts. The lower bolts and radiator core bolts firewall bolts.
![]()
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2013
Location: Green Bay, WI
Posts: 435
|
Re: front clip removal
heres how far i went to remove my 350/T10 and to put in a 5.3L/4L60e
![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,855
|
Re: front clip removal
I used yours to highlight bolts for full front clip removal. There are also rear lower bolts not in picture. Don't forget the little cover for steering. Nice to work on clean engine compartments.
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2013
Location: Sapulpa Oklahoma
Posts: 197
|
Re: front clip removal
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Apr 2009
Location: SAN FERNANDO VALLE SOL CAL
Posts: 1,064
|
Re: front clip removal
i never take hoods off in 30 years of being a wrench,,,
__________________
1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Sep 2006
Location: San Francisco
Posts: 4,780
|
Re: front clip removal
Remove the 14 bolts as shown in the pic above and just lift the whole thing out of your way. The nice thing about it is being able to clean up the frame and inner fenders and giving them a fresh coat of paint if that is what you want. Also.. While you are unbolting it take notes on how many spacers come out and maybe label them so you know exactly how many to put back in certain places.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: front clip removal
thanks guys. the reason I want to pull the front clip is I wasn't to pull my tranny with it. the top bolts on the 2004r are hard to get to and I want to change my flexplate also
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,128
|
Re: front clip removal
I'm going to do the same thing in the spring. Mostly to clean it all up but my rear main leaks real bad.
__________________
66 shorty ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
|
Re: front clip removal
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Oct 2009
Location: anaheim ca
Posts: 274
|
Re: front clip removal
i just take the radiator out . i have never taken the hood off either.
|
![]() |
![]() |
![]() |
#12 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: front clip removal
I've pulled many engine and trans together with just removing the hood and radiator. Unless you just want to pull the entire front clip, that's up to you, but it isn't necessary for what you are wanting to do.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: front clip removal
pulling the clip is fast and easy, my core support bolts were stuck but a jack popped em.
![]()
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: front clip removal
I suppose I went too far? lots of elbow room though.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
![]() |
![]() |
![]() |
Bookmarks |
|
|