MI Gauging Interest in new tach harnesses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 12-26-2013, 08:38 PM

I will soon be reproducing my own tachometer harnesses for 1967 - 1972 Chevy / GMC pick-ups for all of you that are adding a tach cluster to your pick up.

These harnesses will be as factory correct as possible with the exception of the rubber grommet. The grommet will be the correct size for the pass through hole but not the same style. They will be the same gauge wire as the original harness.

I will soon be posting photos of my harness. I am trying to get an idea of how many people would be interested so I can place an order for parts.

I don't have an exact price but they will be under $30.00 shipped

Thank you,
Tom

budnikguy · 12-26-2013, 09:14 PM

Sounds like something I could use!!!

67ctener · 12-26-2013, 09:59 PM

I could use one. Are they reproduced now?

**TBONE1964** · 12-26-2013, 10:02 PM

Quote:

Originally Posted by 67ctener

I could use one. Are they reproduced now?

Not yet but they should be ready in mid January. I am waiting for parts at this time.

I will post a photo of one once I get everything together.

Stay tuned...

**too much stuff** · 12-26-2013, 10:02 PM

Sounds like a good price. Are they for HEI or coil? Would the wires be the correct color also?

**TBONE1964** · 12-26-2013, 10:05 PM

Quote:

Originally Posted by too much stuff

Sounds like a good price. Are they for HEI or coil? Would the wires be the correct color also?

I will make these to order for HEI or point style. The wiring will be close to the correct pink/brown as possible to factory colors. I don't have much wiggle room on exact wire color from vendors.

Thank you,
Tom

kaphillips · 12-27-2013, 01:16 AM

I would be interested in 2 point style harness. Let us know.

**TBONE1964** · 12-27-2013, 01:24 AM

Quote:

Originally Posted by kaphillips

I would be interested in 2 point style harness. Let us know.

Sure will, I am thinking mid January but possibly sooner.

Thank you,
Tom

PT'S 70 CST · 12-27-2013, 10:33 AM

Quote:

Originally Posted by 67ctener

I could use one. Are they reproduced now?

This was what I was referring to and I also wanted to let you know because you answered as if you did not know they were out there. My intentions were to purely be helpful and I would support any board member other than a multi million dollar company any day ( kaphillips)

PT

PT'S 70 CST · 12-27-2013, 02:25 AM

You do know that these are being reproduced by several companies and one being American Autowire. You can get them in HEI or stock points style and they are factory correct down to the color of the wires. Just trying to let you know before you invested to much thinking that they were not out there.

PT

kaphillips · 12-27-2013, 03:30 AM

Yes several companies do make them. However, I would rather buy from a board member if they are correct quality repops than some company I don't known.

**special-K** · 12-27-2013, 07:55 AM

Quote:

Originally Posted by kaphillips

Yes several companies do make them. However, I would rather buy from a board member if they are correct quality repops than some company I don't known.

PT was addressing the vendor. He wasn't telling people who to buy from. I think he's saying the harnesses are already available in "correct quality" from companies we know,

**TBONE1964** · 12-27-2013, 10:13 AM

I appreciate the feed back from everyone. Trust me, I am not going to put American Auto Wire out of business

I have the ability to create a "very high quality" tachometer harness for these trucks for a competitive price. I can assure that my harnesses will be well made and all crimp joints will also be soldered.

My main idea behind making these was to offer them along with one of my restored tach clusters. After all the materials are paid for and to be competitive, I will put about $7.50 per harness in my pocket for my time.

I know there are several well known companies that sell these tach harnesses. It is your choice who you buy one from.

Stay tuned...

Thank you,
Tom

54belair · 12-27-2013, 09:39 PM

I would be interested in seeing a pic and knowing pricing when you get to that point.

**TBONE1964** · 01-29-2014, 10:06 PM

Sorry to all for the delay. I have some other snags to work on. Still in progress though.

Thank you,
Tom

**undertaker72** · 01-29-2014, 10:23 PM

I would be interested , in a couple , after pics and pricing , glad to hear your getting close

thanks

7dee2 · 01-30-2014, 12:23 AM

I'm thinking 2 HEI style let me know...

Thanks,

**TBONE1964** · 03-01-2014, 09:08 PM

OK, guys and gals, Another fine quality product from Classic Gauge and Cluster.

I have finally got everything together to put these together for an HEI. I will have the terminal ends for the point style soon.

I am not 100% sure about the exact factory color. These first ones are going to be pink and brown. I also have red wire but have not built any with the red yet.

The harnesses have the correct length of wire, the correct grommet and the correct connectors. The terminals have all been crimped and soldered.

If you would like a specific wire length, let me know.

I am asking $25.00 shipped for these. I have enough parts to sell 6 currently. If it goes well, I will order more of the parts to build more.

Thanks for looking,
Tom

**TBONE1964** · 03-05-2014, 06:00 PM

Quote:

Originally Posted by 7dee2

I'm thinking 2 HEI style let me know...

Thanks,

PM sent. I have parts ready.

Thank you,
Tom

cwilkie · 03-01-2014, 09:29 PM

Will I get one of these with the tach/vac cluster you are building for me?

**TBONE1964** · 03-01-2014, 09:49 PM

Quote:

Originally Posted by cwilkie

Will I get one of these with the tach/vac cluster you are building for me?

Yes sir. I have one with your name on it

You need to let me know the length of the wires if you are not routing the harness in the same way the factory did.

Thank you,
Tom

**undertaker72** · 03-01-2014, 09:57 PM

I posted prior on #16 ill take one of each , hei and points , if you have the inventory and a little latter ill need 2 more hei , let me know your payment options , do you take paypal
thanks kevin

**TBONE1964** · 03-01-2014, 10:05 PM

Quote:

Originally Posted by undertaker72

I posted prior on #16 ill take one of each , hei and points , if you have the inventory and a little latter ill need 2 more hei , let me know your payment options , do you take paypal
thanks kevin

Kevin,

I am waiting for the point style terminals. They should be in this week. Yes, paypal is OK. You can send me a PM with your address and I will ship them both at the same time.

Thank you,
Tom

**undertaker72** · 03-01-2014, 10:23 PM

tom p.m. sent

**TBONE1964** · 03-01-2014, 10:34 PM

Quote:

Originally Posted by undertaker72

tom p.m. sent

PM sent back.

Thank you Kevin,
Tom

12-26-2013, 09:14 PM	#2
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Gauging Interest in new tach harnesses Sounds like something I could use!!!

12-26-2013, 09:59 PM	#3
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Gauging Interest in new tach harnesses I could use one. Are they reproduced now?

12-26-2013, 10:02 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gauging Interest in new tach harnesses Sounds like a good price. Are they for HEI or coil? Would the wires be the correct color also? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-27-2013, 01:16 AM	#7
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Gauging Interest in new tach harnesses I would be interested in 2 point style harness. Let us know.

12-27-2013, 02:25 AM	#10
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Gauging Interest in new tach harnesses You do know that these are being reproduced by several companies and one being American Autowire. You can get them in HEI or stock points style and they are factory correct down to the color of the wires. Just trying to let you know before you invested to much thinking that they were not out there. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 12-27-2013 at 02:30 AM.

12-26-2013, 08:38 PM	#1
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Gauging Interest in new tach harnesses I will soon be reproducing my own tachometer harnesses for 1967 - 1972 Chevy / GMC pick-ups for all of you that are adding a tach cluster to your pick up. These harnesses will be as factory correct as possible with the exception of the rubber grommet. The grommet will be the correct size for the pass through hole but not the same style. They will be the same gauge wire as the original harness. I will soon be posting photos of my harness. I am trying to get an idea of how many people would be interested so I can place an order for parts. I don't have an exact price but they will be under $30.00 shipped Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

12-27-2013, 03:30 AM	#11
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Gauging Interest in new tach harnesses Yes several companies do make them. However, I would rather buy from a board member if they are correct quality repops than some company I don't known.

12-27-2013, 10:13 AM	#13
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses I appreciate the feed back from everyone. Trust me, I am not going to put American Auto Wire out of business I have the ability to create a "very high quality" tachometer harness for these trucks for a competitive price. I can assure that my harnesses will be well made and all crimp joints will also be soldered. My main idea behind making these was to offer them along with one of my restored tach clusters. After all the materials are paid for and to be competitive, I will put about $7.50 per harness in my pocket for my time. I know there are several well known companies that sell these tach harnesses. It is your choice who you buy one from. Stay tuned... Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

12-27-2013, 09:39 PM	#14
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: Gauging Interest in new tach harnesses I would be interested in seeing a pic and knowing pricing when you get to that point. __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

01-29-2014, 10:06 PM	#15
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses Sorry to all for the delay. I have some other snags to work on. Still in progress though. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-29-2014, 10:23 PM	#16
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Gauging Interest in new tach harnesses I would be interested , in a couple , after pics and pricing , glad to hear your getting close thanks

01-30-2014, 12:23 AM	#17
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: Gauging Interest in new tach harnesses I'm thinking 2 HEI style let me know... Thanks, __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

03-01-2014, 09:08 PM	#18
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses OK, guys and gals, Another fine quality product from Classic Gauge and Cluster. I have finally got everything together to put these together for an HEI. I will have the terminal ends for the point style soon. I am not 100% sure about the exact factory color. These first ones are going to be pink and brown. I also have red wire but have not built any with the red yet. The harnesses have the correct length of wire, the correct grommet and the correct connectors. The terminals have all been crimped and soldered. If you would like a specific wire length, let me know. I am asking $25.00 shipped for these. I have enough parts to sell 6 currently. If it goes well, I will order more of the parts to build more. Thanks for looking, Tom Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

03-01-2014, 09:29 PM	#20
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: Gauging Interest in new tach harnesses Will I get one of these with the tach/vac cluster you are building for me? __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

03-01-2014, 09:57 PM	#22
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Gauging Interest in new tach harnesses I posted prior on #16 ill take one of each , hei and points , if you have the inventory and a little latter ill need 2 more hei , let me know your payment options , do you take paypal thanks kevin



Register or Log In To remove these advertisements.

03-01-2014, 10:23 PM	#24
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Gauging Interest in new tach harnesses tom p.m. sent

Register or Log In To remove these advertisements.