hauling a cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72bigblock · 07-17-2003, 09:12 PM

what is the best way to haul a cab in a 02 chevy short bed?? thanks chris

Alexis · 07-17-2003, 09:16 PM

most guys just put the cad side ways in the bed. it fits perfect. maybe it will do the same in your 02.

lukecp · 07-17-2003, 09:23 PM

What Alexis said or...

You might be able to get away with lying the cab on its back, and putting it between the wheelwells. The beds on late model P/U's are pretty big, so it might work. Either way, make sure you tie it down really good, then drive off

72bigblock · 07-17-2003, 09:33 PM

also thanks chriswhy do i need a high hump cab for a big block and thm 400?

Alexis · 07-17-2003, 09:35 PM

cause on a low lump there is a lip that nags down that you have to bend inward to fit in that transmission. The high humps allows for room. I think that how it go's.

Class of 69 · 07-17-2003, 10:14 PM

The cab will fit in the bed sideways, BUT it will sit in the wheel housing on the back of the cab!! I had to use 4 tires on rims as spacers to keep the cab above the wheel housings!!

72bigblock · 07-18-2003, 10:19 AM

ttt

Longhorn Man · 07-18-2003, 08:40 PM

Good idea on putting tires down there...mine did get damaged a little.

07-17-2003, 09:12 PM	#1
72bigblock Registered User Join Date: Oct 2002 Location: rockford il. Posts: 190	hauling a cab what is the best way to haul a cab in a 02 chevy short bed?? thanks chris

07-17-2003, 09:23 PM	#3
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	What Alexis said or... You might be able to get away with lying the cab on its back, and putting it between the wheelwells. The beds on late model P/U's are pretty big, so it might work. Either way, make sure you tie it down really good, then drive off __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-17-2003, 10:14 PM	#6
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	The cab will fit in the bed sideways, BUT it will sit in the wheel housing on the back of the cab!! I had to use 4 tires on rims as spacers to keep the cab above the wheel housings!! __________________ 69 GMC K10 ..some restoration required....still..

07-18-2003, 08:40 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Good idea on putting tires down there...mine did get damaged a little. Attached Images

07-17-2003, 09:16 PM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	most guys just put the cad side ways in the bed. it fits perfect. maybe it will do the same in your 02.

07-17-2003, 09:33 PM	#4
72bigblock Registered User Join Date: Oct 2002 Location: rockford il. Posts: 190	also thanks chriswhy do i need a high hump cab for a big block and thm 400?

07-17-2003, 09:35 PM	#5
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	cause on a low lump there is a lip that nags down that you have to bend inward to fit in that transmission. The high humps allows for room. I think that how it go's.

07-18-2003, 10:19 AM	#7
72bigblock Registered User Join Date: Oct 2002 Location: rockford il. Posts: 190	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.