Anybody in the neck of the woods with 6 bangers?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TJ's Chevy · 01-12-2014, 06:13 PM

I love the old school 6 cylinders...hotrodded or stock...I am currently working on hot rodding a 292 in my 66....Anybody here doing the same???

zeldman · 01-12-2014, 06:35 PM

Not in your neck of the woods, but my next project will be a 292. My favorite is the 1970 C-10 and I have had one with every engine from a 283 to a 502. Now that I am older I am wanting to do an old school 6 cylinder. I have a 70 C-10 sitting next to my garage, 292 with a 350 trans and power steering. An old man truck for sure. The rust was free. I am planning a 3 duece 292 using Rochester 2 GC carbs, but not sure if I can find an intake. I might have to modify a two one barrel intake and just run two carbs.

TJ's Chevy · 01-12-2014, 07:03 PM

Quote:

Originally Posted by zeldman

Not in your neck of the woods, but my next project will be a 292. My favorite is the 1970 C-10 and I have had one with every engine from a 283 to a 502. Now that I am older I am wanting to do an old school 6 cylinder. I have a 70 C-10 sitting next to my garage, 292 with a 350 trans and power steering. An old man truck for sure. The rust was free. I am planning a 3 duece 292 using Rochester 2 GC carbs, but not sure if I can find an intake. I might have to modify a two one barrel intake and just run two carbs.

Offenhouser makes a three carb intake.

powell72 · 01-12-2014, 07:48 PM

I think the Offy intakes that except the three carbs are for the 62 and older 6's. Dual carb is all they make for 230-292.

Here's my winter project for my 250.

TJ's Chevy · 01-12-2014, 07:57 PM

Offendhouser makes intakes that will fit a 194-230-250-292 single, dual and triple. Clifford also, the 194(late version)-230-250-292 can use the same intake and exhaust.

zeldman · 01-14-2014, 12:40 PM

Quote:

Originally Posted by T.J. MCCAULEY

Offendhouser makes intakes that will fit a 194-230-250-292 single, dual and triple. Clifford also, the 194(late version)-230-250-292 can use the same intake and exhaust.

Awsome..!!! Thanks for the info. Just waiting for spring and the new business to get off the ground then I will be putting a 6 banger together.

TJ's Chevy · 01-14-2014, 02:59 PM

Quote:

Originally Posted by zeldman

Awsome..!!! Thanks for the info. Just waiting for spring and the new business to get off the ground then I will be putting a 6 banger together.

Look forward to watching the progress!

lowrodderchev · 01-12-2014, 08:04 PM

Quote:

Originally Posted by T.J. MCCAULEY

I love the old school 6 cylinders...hotrodded or stock...I am currently working on hot rodding a 292 in my 66....Anybody here doing the same???

sorry no pix but I have a 292 in my 54 belair and I love that valve cover on yours. I'm also running a 235 in my fleetline triple carb set up

Flthead · 01-12-2014, 08:13 PM

I have a 292 in my ' 64 Lwb and 1 in my '82 Lwb . Had 1 in my '70 short step but that now has a 400 small block. Like the inlines better

pritch · 01-12-2014, 09:40 PM

I'm getting there, slow but sure.

292 in my Panel project:

And the 250 in my driver:

No V-thingys for me!

ole dollor · 01-12-2014, 11:45 PM

I am running a 292 and a th350. just stock old school low and slow. would be nice to hop it up some day. love the gas mileage.

PanelDeland · 01-12-2014, 09:38 PM

Check out this thread for more eye candy than you thought existed.

http://67-72chevytrucks.com/vboard/s...d.php?t=258488

**'68OrangeSunshine** · 01-13-2014, 02:22 AM

Hi TJ: If by "Neck of the Woods" being a philosophical state of mind relative to L6s and especially, the 292... then I'm there. Obviously I'm not anywhere near Oregon.
I run a '68 292 L6 in my '68 C/10 Stepside. It's the original engine F0627XAE, on its 1st rebuild, bored .030 over, with Badger pistons, Crane 260H cam, Rhoads lifters, V8 307 intake valves [1.84], hi-volume oil pump, Clifford Research headers, Offenhauser intake, w/ Eddy 1404 500 CFM AFB-type 4 barrel carb and Pertronix Ignitor II ignition. It has turbo muffles on dual exhaust with a crossover tube. I run 235/85R16 tires on 16" rims, since the OEM 17.5" x 5.25" rims gave out with less than 300,000 on them. Rear is a GM 12 Bolt 3.73:1 Eaton Posi.
I have 2 more 292 cores: One ran in the Stepside from 1977 to 2002 racking up 250,000 miles before I had to pull it when the mechanic said it had no action in #3 and #4 cylinders. Since it was bored thirty over in '77, the next rebuild will have to be .040 or .060 [301 CuIn!].
The other core is painted green and the casting numbers say it's a 1962-cast 292 for the '63 model year.
I have a couple of projects on the siding. I need to rebuild my '67 K/10 Suburban, and I have a lot of parts that will comprise a '72 K/5 when assembled in the correct order. For the latter, I have a Rockwell T221/SM465 transmission/transfer case, and the very rare 292-specific, angled L6 crossmember. T

chevy88 · 01-13-2014, 02:46 AM

I was going to put in a rebuilt 292 6 cylinder, until I found a 6.2 diesel, but if the diesel dies, I still got the 292 their waiting its turn, they just look cool.

**Grumpy old man** · 01-13-2014, 07:23 AM

I've found some 292's that are pulling 325 hp on a dyno on youtube and this 292 on the web (not my engine ) I bought a 292 off craigslist for $200.00 and after a little research found installing "HUMPS" into the head works great .http://

http://

TJ's Chevy · 01-13-2014, 04:17 PM

Lump port head makes a major increase in power. If you do some research on the oem chevy 6 cylinder head you'll know why. lol. Airflow was last on chevys priority for the 6 cylinder head.

Codez67Chevy · 01-13-2014, 04:24 PM

I've got one that's still alive. What all do you have done on yours T.J.??

TJ's Chevy · 01-13-2014, 04:27 PM

Quote:

Originally Posted by Codez67Chevy

I've got one that's still alive. What all do you have done on yours T.J.??

HEI, Clifford Intake, Clifford headers, Edelbrock 1405 600 CFM 4 barrel. Dual exhaust with flowmaster 40 series.....runs awesome, getting to be time for the performance overhaul.

TJ's Chevy · 01-15-2014, 10:25 PM

Bump! Any updates?????

TJ's Chevy · 01-21-2014, 04:14 PM

C'mon! Here is a motivation picture.....

slowcpe · 01-21-2014, 04:25 PM

In for pics.

I'm planning on rocking out my 250 for this year. While not planning on putting money in performance mods, I'm still going to detail the engine bay. Was just going to de-grease and pressure wash but now I apparently have a antifreeze leak coming from the back of the motor (drips from the bellhousing). So I guess I might pull the motor and see whats wrong. While out, I think I'll paint the engine orange and all accessories, brackets and manifold flat black.

Codez67Chevy · 01-21-2014, 09:05 PM

O boy I have that book as well! Love Love Love that book! Great info in there.

01-12-2014, 06:13 PM	#1
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Anybody in the neck of the woods with 6 bangers?? I love the old school 6 cylinders...hotrodded or stock...I am currently working on hot rodding a 292 in my 66....Anybody here doing the same??? Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-12-2014, 06:35 PM	#2
zeldman Registered User Join Date: Oct 2013 Location: Rt 66 Gallup, NM Posts: 527	Re: Anybody in the neck of the woods with 6 bangers?? Not in your neck of the woods, but my next project will be a 292. My favorite is the 1970 C-10 and I have had one with every engine from a 283 to a 502. Now that I am older I am wanting to do an old school 6 cylinder. I have a 70 C-10 sitting next to my garage, 292 with a 350 trans and power steering. An old man truck for sure. The rust was free. I am planning a 3 duece 292 using Rochester 2 GC carbs, but not sure if I can find an intake. I might have to modify a two one barrel intake and just run two carbs. __________________ 2005 GMC K2500HD D/A 1993 GMC K1500 2011 Subaru Legacy. 2013 Subaru Outback 1970 C-10 2WD, SWB stepside, 292, TH350, PS, more rust than anything. God is my pilot.

01-12-2014, 07:57 PM	#5
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody in the neck of the woods with 6 bangers?? Offendhouser makes intakes that will fit a 194-230-250-292 single, dual and triple. Clifford also, the 194(late version)-230-250-292 can use the same intake and exhaust. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-12-2014, 08:13 PM	#9
Flthead Registered User Join Date: Nov 2013 Location: South jersey 51st state Posts: 138	Re: Anybody in the neck of the woods with 6 bangers?? I have a 292 in my ' 64 Lwb and 1 in my '82 Lwb . Had 1 in my '70 short step but that now has a 400 small block. Like the inlines better

01-12-2014, 09:40 PM	#10
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Anybody in the neck of the woods with 6 bangers?? I'm getting there, slow but sure. 292 in my Panel project: And the 250 in my driver: No V-thingys for me! __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

01-12-2014, 07:48 PM	#4
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Anybody in the neck of the woods with 6 bangers?? I think the Offy intakes that except the three carbs are for the 62 and older 6's. Dual carb is all they make for 230-292. Here's my winter project for my 250. Attached Images __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

01-12-2014, 11:45 PM	#11
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: Anybody in the neck of the woods with 6 bangers?? I am running a 292 and a th350. just stock old school low and slow. would be nice to hop it up some day. love the gas mileage.

01-12-2014, 09:38 PM	#12
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Anybody in the neck of the woods with 6 bangers?? Check out this thread for more eye candy than you thought existed. http://67-72chevytrucks.com/vboard/s...d.php?t=258488 __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-13-2014, 02:22 AM	#13
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Anybody in the neck of the woods with 6 bangers?? Hi TJ: If by "Neck of the Woods" being a philosophical state of mind relative to L6s and especially, the 292... then I'm there. Obviously I'm not anywhere near Oregon. I run a '68 292 L6 in my '68 C/10 Stepside. It's the original engine F0627XAE, on its 1st rebuild, bored .030 over, with Badger pistons, Crane 260H cam, Rhoads lifters, V8 307 intake valves [1.84], hi-volume oil pump, Clifford Research headers, Offenhauser intake, w/ Eddy 1404 500 CFM AFB-type 4 barrel carb and Pertronix Ignitor II ignition. It has turbo muffles on dual exhaust with a crossover tube. I run 235/85R16 tires on 16" rims, since the OEM 17.5" x 5.25" rims gave out with less than 300,000 on them. Rear is a GM 12 Bolt 3.73:1 Eaton Posi. I have 2 more 292 cores: One ran in the Stepside from 1977 to 2002 racking up 250,000 miles before I had to pull it when the mechanic said it had no action in #3 and #4 cylinders. Since it was bored thirty over in '77, the next rebuild will have to be .040 or .060 [301 CuIn!]. The other core is painted green and the casting numbers say it's a 1962-cast 292 for the '63 model year. I have a couple of projects on the siding. I need to rebuild my '67 K/10 Suburban, and I have a lot of parts that will comprise a '72 K/5 when assembled in the correct order. For the latter, I have a Rockwell T221/SM465 transmission/transfer case, and the very rare 292-specific, angled L6 crossmember. T __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

01-13-2014, 02:46 AM	#14
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: Anybody in the neck of the woods with 6 bangers?? I was going to put in a rebuilt 292 6 cylinder, until I found a 6.2 diesel, but if the diesel dies, I still got the 292 their waiting its turn, they just look cool. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

01-13-2014, 07:23 AM	#15
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Anybody in the neck of the woods with 6 bangers?? I've found some 292's that are pulling 325 hp on a dyno on youtube and this 292 on the web (not my engine ) I bought a 292 off craigslist for $200.00 and after a little research found installing "HUMPS" into the head works great .http://http://

01-13-2014, 04:17 PM	#16
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody in the neck of the woods with 6 bangers?? Lump port head makes a major increase in power. If you do some research on the oem chevy 6 cylinder head you'll know why. lol. Airflow was last on chevys priority for the 6 cylinder head. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-13-2014, 04:24 PM	#17
Codez67Chevy Registered User Join Date: Nov 2012 Location: Spanish Fork Ut Posts: 370	Re: Anybody in the neck of the woods with 6 bangers?? I've got one that's still alive. What all do you have done on yours T.J.?? __________________ " Dead Pumpkin" 67 Chevy short bed, 292 I6, 4spd manual. Fan of the "Slant Noses". 93' Toyota pickup 2WD 2dr and 32mpg. Daily driver. 300k+ Members I've met... Mister-B

01-15-2014, 10:25 PM	#19
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody in the neck of the woods with 6 bangers?? Bump! Any updates????? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-21-2014, 04:14 PM	#20
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody in the neck of the woods with 6 bangers?? C'mon! Here is a motivation picture..... Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

01-21-2014, 04:25 PM	#21
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Anybody in the neck of the woods with 6 bangers?? In for pics. I'm planning on rocking out my 250 for this year. While not planning on putting money in performance mods, I'm still going to detail the engine bay. Was just going to de-grease and pressure wash but now I apparently have a antifreeze leak coming from the back of the motor (drips from the bellhousing). So I guess I might pull the motor and see whats wrong. While out, I think I'll paint the engine orange and all accessories, brackets and manifold flat black. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

01-21-2014, 09:05 PM	#22
Codez67Chevy Registered User Join Date: Nov 2012 Location: Spanish Fork Ut Posts: 370	Re: Anybody in the neck of the woods with 6 bangers?? O boy I have that book as well! Love Love Love that book! Great info in there. __________________ " Dead Pumpkin" 67 Chevy short bed, 292 I6, 4spd manual. Fan of the "Slant Noses". 93' Toyota pickup 2WD 2dr and 32mpg. Daily driver. 300k+ Members I've met... Mister-B

Register or Log In To remove these advertisements.