OR 66 3/4 ton for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LT1 Burb · 01-13-2014, 09:25 PM

I will offer this up here if anyone wants it, otherwise it will get crushed. I am going to take the outer roof skin, drivers door, gauges and backup lights. The floors and rockers are very good. The cab mounts and cab corners are nice. I will take the hood out if it goes to scrap and it is fairly good. Very slight rust on the brows but better than alot you see.It is a 3/4 ton with the 16" wheels that have clips for the caps. It has a 4:11 rear with full floating axles, good trailing arms etc. This was sold new out of Roseburg and is still here, build sheet is still behind the seat. Has a clear title , also dash is uncut as it had a radio delete plate on it. AS is, no drive train. 350.00, I have a roof skin I will throw in if someone wants to save it.

**DPowers** · 01-13-2014, 11:00 PM

Chrome trim?

LT1 Burb · 01-14-2014, 10:57 PM

Quote:

Originally Posted by DPowers

Chrome trim?

The chrome trim is fair until the bed and then it is crap, passenger side is torn in 2 pieces.

Sick5 · 01-15-2014, 02:42 PM

Quote:

Originally Posted by LT1 Burb

The chrome trim is fair until the bed and then it is crap, passenger side is torn in 2 pieces.

depending on the price i might take it anyways
keep me line

LT1 Burb · 01-14-2014, 12:50 AM

I will leave it on if someone wants the truck. I will sell it if I crush the truck.

oem4me · 01-14-2014, 02:09 AM

How long till ya mash it? So, you want to sell it complete, as opposed to parting it, right?

**yelmer** · 01-14-2014, 09:52 AM

oem4me is has the 411 rear end

Gargoyle · 01-14-2014, 10:03 AM

the front clip looks pretty good, wish I was in that part of the country.

LT1 Burb · 01-14-2014, 10:04 AM

I don't want to crush it as I think it still has lots of parts someone can use. I don't have the time to part it, otherwise my shortwide will never get finished. I also don't want to unload it off my trailer as I have no room and live in a decent area so don't want to piss the neighbours off. I would like it gone by a week Saturday, if there is something you want LMK.

LT1 Burb · 01-14-2014, 10:44 AM

Sent you a PM bruce

oem4me · 01-14-2014, 12:34 PM

Quote:

Originally Posted by LT1 Burb

Sent you a PM bruce

PM back.

**66 C10 383** · 01-14-2014, 12:56 PM

If you do part this out and DPowers passes on the side trim I'm interested ...

Sick5 · 01-14-2014, 05:23 PM

man beat me to the trim sheesh!!!

apocalypse · 01-14-2014, 07:44 PM

I'm interested in the grill support if you're part it out, if it's in good shape.

**yelmer** · 01-14-2014, 10:00 PM

Can you post the buildsheet thanks

LT1 Burb · 01-14-2014, 10:52 PM

Quote:

Originally Posted by yelmer

Can you post the buildsheet thanks

I will try, it actually has one behind the seat and a shredded one under the seat.

LT1 Burb · 01-14-2014, 10:55 PM

Quote:

Originally Posted by apocalypse

I'm interested in the grill support if you're part it out, if it's in good shape.

I do have a couple if I don't part this.

earl84 · 01-14-2014, 10:03 PM

Man, I really need a place in the country so I could jump on something like this. Homeowner's Associations suck.

Mthumphrey · 01-15-2014, 12:07 AM

If it doesn't have rust, I could really use just the front portion of the hood if you part out.

LT1 Burb · 01-17-2014, 12:27 AM

Quote:

Originally Posted by Mthumphrey

If it doesn't have rust, I could really use just the front portion of the hood if you part out.

Hood to nice to cutup, sorry.

LT1 Burb · 01-16-2014, 03:02 PM

Going to the crushers next saturday, if you need anything LMK.

NEWFISHER · 01-16-2014, 03:08 PM

Nooooooooooooooooo....the guilt must be horrible

What time you leaving this neck of the woods Saturday? I can come down and run a hot wrench and help pull it apart if you need a hand.

Or we could paint it Orange and part it out in front of your neighbors place...didn't he want a truck?

LT1 Burb · 01-16-2014, 04:32 PM

Quote:

Originally Posted by NEWFISHER

Nooooooooooooooooo....the guilt must be horrible

What time you leaving this neck of the woods Saturday? I can come down and run a hot wrench and help pull it apart if you need a hand.

Or we could paint it Orange and part it out in front of your neighbors place...didn't he want a truck?

I am hoping to be back before 9:30, Hey , if you want free beer and the use of my tools you are always welcome to help.

Sick5 · 01-16-2014, 03:10 PM

Side molding???

apocalypse · 01-16-2014, 03:27 PM

Grill support, please

01-13-2014, 09:25 PM	#1
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	66 3/4 ton for sale I will offer this up here if anyone wants it, otherwise it will get crushed. I am going to take the outer roof skin, drivers door, gauges and backup lights. The floors and rockers are very good. The cab mounts and cab corners are nice. I will take the hood out if it goes to scrap and it is fairly good. Very slight rust on the brows but better than alot you see.It is a 3/4 ton with the 16" wheels that have clips for the caps. It has a 4:11 rear with full floating axles, good trailing arms etc. This was sold new out of Roseburg and is still here, build sheet is still behind the seat. Has a clear title , also dash is uncut as it had a radio delete plate on it. AS is, no drive train. 350.00, I have a roof skin I will throw in if someone wants to save it. Attached Images

01-13-2014, 11:00 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 66 3/4 ton for sale Chrome trim? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-14-2014, 12:50 AM	#5
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 66 3/4 ton for sale I will leave it on if someone wants the truck. I will sell it if I crush the truck.

01-14-2014, 02:09 AM	#6
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: 66 3/4 ton for sale How long till ya mash it? So, you want to sell it complete, as opposed to parting it, right?

01-14-2014, 09:52 AM	#7
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 66 3/4 ton for sale oem4me is has the 411 rear end

01-14-2014, 10:03 AM	#8
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: 66 3/4 ton for sale the front clip looks pretty good, wish I was in that part of the country.

01-14-2014, 10:04 AM	#9
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 66 3/4 ton for sale I don't want to crush it as I think it still has lots of parts someone can use. I don't have the time to part it, otherwise my shortwide will never get finished. I also don't want to unload it off my trailer as I have no room and live in a decent area so don't want to piss the neighbours off. I would like it gone by a week Saturday, if there is something you want LMK.

01-14-2014, 10:44 AM	#10
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 66 3/4 ton for sale Sent you a PM bruce

01-14-2014, 12:56 PM	#12
66 C10 383 Senior Member Join Date: Aug 2012 Location: Somewhere In So. IL. Posts: 412	Re: 66 3/4 ton for sale If you do part this out and DPowers passes on the side trim I'm interested ... __________________ Doug Old Build Thread - 383/T56 http://www.67-72chevytrucks.com/vboa...d.php?t=540838 Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua 5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital http://67-72chevytrucks.com/vboard/s...d.php?t=778784

01-14-2014, 05:23 PM	#13
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 66 3/4 ton for sale man beat me to the trim sheesh!!! __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

01-14-2014, 07:44 PM	#14
apocalypse Registered User Join Date: Oct 2013 Location: Indiana Posts: 169	Re: 66 3/4 ton for sale I'm interested in the grill support if you're part it out, if it's in good shape.

01-14-2014, 10:00 PM	#15
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 66 3/4 ton for sale Can you post the buildsheet thanks

01-14-2014, 10:03 PM	#18
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: 66 3/4 ton for sale Man, I really need a place in the country so I could jump on something like this. Homeowner's Associations suck.

01-15-2014, 12:07 AM	#19
Mthumphrey Registered User Join Date: Aug 2013 Location: Nashville, TN Posts: 120	Re: 66 3/4 ton for sale If it doesn't have rust, I could really use just the front portion of the hood if you part out.

01-16-2014, 03:02 PM	#21
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 66 3/4 ton for sale Going to the crushers next saturday, if you need anything LMK.



Register or Log In To remove these advertisements.

01-16-2014, 03:08 PM	#22
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: 66 3/4 ton for sale Nooooooooooooooooo....the guilt must be horrible What time you leaving this neck of the woods Saturday? I can come down and run a hot wrench and help pull it apart if you need a hand. Or we could paint it Orange and part it out in front of your neighbors place...didn't he want a truck? __________________ GOD BLESS AMERICA!

01-16-2014, 03:10 PM	#24
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 66 3/4 ton for sale Side molding??? __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

01-16-2014, 03:27 PM	#25
apocalypse Registered User Join Date: Oct 2013 Location: Indiana Posts: 169	Re: 66 3/4 ton for sale Grill support, please

Register or Log In To remove these advertisements.