|
|
|
01-30-2014, 02:59 AM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: clovis NM
Posts: 14
|
ridetech
Just placed order with ridetech. Level 2 kit with 5 gal airpod, The BIGRED 3/8" solenoids, xtra 5 gal tank, xtra AMK compressor and muscle bar. Any tips or comments on install. 86 c10 short bed.
|
|
|
|
01-30-2014, 08:01 AM
|
#2 |
|
Java Mechanic
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,763
|
Re: ridetech
Take your time and measure everything 5 times. It gets done faster that way.
__________________
Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 .... |
|
|
|
|
01-30-2014, 11:12 AM
|
#3 |
|
Registered User
Join Date: Jan 2014
Location: Lawrenceville, IL
Posts: 21
|
Re: ridetech
great kit, easy install... watch your knuckles
|
|
|
|
|
01-30-2014, 01:22 PM
|
#4 |
|
Registered User
Join Date: Aug 2010
Location: AZ
Posts: 3,069
|
Re: ridetech
Here are just a few tips, not specific to the RideTech system, but general air bag installation. #4 is very important!
1) Make sure to run your air lines away from anything that can damage them. Keep away from headers, sharp edges, etc. If you run through the frame, use a grommet. 2) Cut your air line straight and square, insert all the way into the PTC fitting, and give a small tug to make sure it is fully inserted. 3) Teflon tape works on threaded fittings, but I highly recommend the Loctite 545 sealant, which works very well. 4) When done, enjoy your new suspension and ride quality. - Travis |
|
|
|
|
01-31-2014, 12:01 AM
|
#5 |
|
Registered User
Join Date: Dec 2013
Location: clovis NM
Posts: 14
|
Re: ridetech
Thanks for the tips. I will be asking more as I start the install
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
