RnD Fabrication 1973-1987 Chevrolet & GMC C10 / C20 / Suburban Radiators!

[SparkyRnD]

RnD Fabrication is proud to introduce our line of 1973-1987 Chevrolet & GMC C10 / C20 / Suburban Radiators! We can build these for stock engines, as well as for LS & other engine conversions with ports in the correct locations for your engine. All units include a transmission cooler at no additional charge (specify when ordering). If you want one for an LS conversion, there is no additional charge, and simply specify if you want the steam port or not. Retail price is $530, and members of this forum get a discounted price of $505.




Here is a link to the 73-87 C10 page on our website:
http://www.rndfabrication.com/C10late.html

Make sure to mention you are a member to get your discount!


Also, we make them for 1963-1966 and 1967-1972 models as well! Contact us if you have any questions. Remember, we are a Gold Site Vendor and we offer discounts for forum members.

[SparkyRnD]

If you have an LS conversion, we make them with the correct inlet, outlet and steam port at no additional charge!

[SparkyRnD]

back up top, thanks for the support! Remember to ask for your discount when ordering!

[SparkyRnD]

bringing around again, let us know how we can help with your project!

[SparkyRnD]

back up again

[SparkyRnD]

up top again

[chevy-fun]

can you tell me the dimension. an is this a 2,3,4 core?

[SparkyRnD]

These are based on the stock original radiators, and they are made with dual 1" thick cores for a total core thickness of 2". This is the same thickness as the old brass & copper 4-core (brass & copper units use 1/2" thick cores, where-as aluminum radiators use 1" thick cores). They are a complete bolt-in radiator, no cutting required.

[SparkyRnD]

back up top, remember to mention that you are a forum member to get your discount!

[SparkyRnD]

thanks again for the orders, and contact us if you have any questions

[SparkyRnD]

back up again

[SparkyRnD]

up top

[SparkyRnD]

We will be closed on Friday in observance of the 4th of July. Thanks again for the support!

[SparkyRnD]

back up again

[SparkyRnD]

Back up again, remember to ask for your discount when ordering (or tell us you found us here)

[SparkyRnD]

back up top!

[SparkyRnD]

Contact us to keep your truck cool!

[haybale]

What brand are the fans? I'm looking at a complete kit sometime in the near future. Thank You

[SparkyRnD]

the standard fans are private label fans we have made for us. We also can get Derale, Spal, and several others depending on what your budget / needs are. The more power you make and the less space available, the more they cost as a general rule. But with the C10's, there is a ton of room so our standard fans are usually more than adequate. If the engine is built, we just need details about the build / use of the truck to know what to recommend.

[flashed]

Do you have a fan that mounts on the outside of the radiator on an A/C truck ,1972 ?

[SparkyRnD]

Originally Posted by flashed

Do you have a fan that mounts on the outside of the radiator on an A/C truck ,1972 ?

All of our fans can be mounted as a pusher or a puller. What state are you in, and is your engine an sbc, bbc or ls? Stock or built? How much space do you have in front of the radiator?

[flashed]

I am in Canton Ga not far from you ,I can bring the truck down for you to see what fits if needed .I wish I had known about you before I bought my radiator .

[SparkyRnD]

just a tape measure distance from the front of the rad to the nearest item in front of it will work

[SparkyRnD]

thanks again for the support guys, and let us know if we can help on your project!

[SparkyRnD]

back up top