SC wtb: new ps rag joint ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hardwaycooke · 02-24-2014, 12:49 AM

can someone lead to the right place to buy a ps rag joint. changing out my 71 manual to ps. Have everything done, just need the joint. i counted 31 splines.
Thanks

sduckworth13 · 02-24-2014, 02:17 AM

Maybe this will help, its a link to rebuild your rag joint.
http://67-72chevytrucks.com/vboard/s...d.php?t=614332

Sammy · 02-24-2014, 07:22 AM

Scott, I think he is in the same spot I am. The manual box rag joint is a different spline count n diameter. But some good info there rebuilding a used one.

**kev2809** · 02-24-2014, 10:46 AM

i have one but not sure if this is the one you need..

http://shop.advanceautoparts.com/p/l...202/18340127-p

Its brand new in the box

**michael bustamante** · 02-24-2014, 10:49 AM

Theyre readily abail. At parts stores like autozone if yoyre in a hurry

hardwaycooke · 02-24-2014, 10:56 AM

Quote:

Originally Posted by michael bustamante

Theyre readily abail. At parts stores like autozone if yoyre in a hurry

so whcih one do i order? 31 spline 3/4, or 31 spline 13/16? I'm reading a bunch of different answers.
Thanks guys and yes, my manual one and my ps are diff.

**michael bustamante** · 02-24-2014, 12:00 PM

Yup they are. I asked for a ragjoint for a 77 chevu 1/2 ton 2wd with power steer.

**kev2809** · 02-24-2014, 12:14 PM

I thought i counted mine right and was still wrong. The difference all depends on the gearbox youre buying. I had to order a few to make sure i got the right one.

hardwaycooke · 02-24-2014, 01:19 PM

advanced auto had 2. One for manual that was 3/4 and one for ps that was 13/16. I ordered the ps one. Hope its right. Picture looked right.

Sammy · 02-26-2014, 12:37 PM

RockAuto shows two also. Let me know how you came out. I need one also.
http://www.rockauto.com/catalog/x,ca...2BA1%2BCARDONE

65 C20 · 02-27-2014, 01:15 PM

I am in the same boat.
Did anyone come up with a Dorman part # ?
Cal.

hardwaycooke · 02-27-2014, 01:20 PM

i slid mine on but want to completey get it together before i say it works. Will be this weekend. it is from adv auto. they have a manual one and a ps one

Sammy · 02-28-2014, 09:49 AM

If it slides on the shaft you should be good.
Post a part number after you confirm it please. I am going to try RockAuto's.

65 C20 · 03-03-2014, 01:31 PM

Did anyone come up with a part #
I know the ones you were looking at were Lares.
Does anyone know the Dorman part#
I have a 31015 but doesn't want to slide on and don't want to force if wrong one.
I have the 68-76 P/S box pre metric.
Cal.

hardwaycooke · 03-03-2014, 01:34 PM

Quote:

Originally Posted by 65 C20

Did anyone come up with a part #
I know the ones you were looking at were Lares.
Does anyone know the Dorman part#
I have a 31015 but doesn't want to slide on and don't want to force if wrong one.
I have the 68-76 P/S box pre metric.
Cal.

The Lares worked like a charm. Slide on easily. Had to tap the bolt a little to het it to slide across the spline/neck but all is good. Now the pulley fiasco is another story...

65 C20 · 03-03-2014, 01:45 PM

Quote:

Originally Posted by hardwaycooke

The Lares worked like a charm. Slide on easily. Had to tap the bolt a little to het it to slide across the spline/neck but all is good. Now the pulley fiasco is another story...

Was it the Lares #201 ?
Cal.

Sammy · 03-12-2014, 12:05 PM

The Lares from RockAuto I ordered worked like a charm. Slid on perfectly. The link I posted is the one I ordered.

No tapping required.

Sammy · 03-12-2014, 12:08 PM

Yes 201...$21 after shipped.

65 C20 · 03-12-2014, 01:09 PM

If you can't find the Lares.
I used Dorman #31015.
It was tight and needed to be tapped on.

02-24-2014, 12:49 AM	#1
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	wtb: new ps rag joint ASAP can someone lead to the right place to buy a ps rag joint. changing out my 71 manual to ps. Have everything done, just need the joint. i counted 31 splines. Thanks

02-24-2014, 10:46 AM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,146	Re: wtb: new ps rag joint ASAP i have one but not sure if this is the one you need.. http://shop.advanceautoparts.com/p/l...202/18340127-p Its brand new in the box __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

02-24-2014, 10:49 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: wtb: new ps rag joint ASAP Theyre readily abail. At parts stores like autozone if yoyre in a hurry __________________ 1967custom

02-24-2014, 12:00 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: wtb: new ps rag joint ASAP Yup they are. I asked for a ragjoint for a 77 chevu 1/2 ton 2wd with power steer. __________________ 1967custom

02-24-2014, 12:14 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,146	Re: wtb: new ps rag joint ASAP I thought i counted mine right and was still wrong. The difference all depends on the gearbox youre buying. I had to order a few to make sure i got the right one. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

02-24-2014, 02:17 AM	#2
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: wtb: new ps rag joint ASAP Maybe this will help, its a link to rebuild your rag joint. http://67-72chevytrucks.com/vboard/s...d.php?t=614332 __________________ Scott

02-24-2014, 07:22 AM	#3
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: wtb: new ps rag joint ASAP Scott, I think he is in the same spot I am. The manual box rag joint is a different spline count n diameter. But some good info there rebuilding a used one. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

02-24-2014, 01:19 PM	#9
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	Re: wtb: new ps rag joint ASAP advanced auto had 2. One for manual that was 3/4 and one for ps that was 13/16. I ordered the ps one. Hope its right. Picture looked right.

02-26-2014, 12:37 PM	#10
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: wtb: new ps rag joint ASAP RockAuto shows two also. Let me know how you came out. I need one also. http://www.rockauto.com/catalog/x,ca...2BA1%2BCARDONE __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

02-27-2014, 01:15 PM	#11
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: wtb: new ps rag joint ASAP I am in the same boat. Did anyone come up with a Dorman part # ? Cal.

02-27-2014, 01:20 PM	#12
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	Re: wtb: new ps rag joint ASAP i slid mine on but want to completey get it together before i say it works. Will be this weekend. it is from adv auto. they have a manual one and a ps one

02-28-2014, 09:49 AM	#13
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: wtb: new ps rag joint ASAP If it slides on the shaft you should be good. Post a part number after you confirm it please. I am going to try RockAuto's. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-03-2014, 01:31 PM	#14
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: wtb: new ps rag joint ASAP Did anyone come up with a part # I know the ones you were looking at were Lares. Does anyone know the Dorman part# I have a 31015 but doesn't want to slide on and don't want to force if wrong one. I have the 68-76 P/S box pre metric. Cal.

03-12-2014, 12:05 PM	#17
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: wtb: new ps rag joint ASAP The Lares from RockAuto I ordered worked like a charm. Slid on perfectly. The link I posted is the one I ordered. No tapping required. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" Last edited by Sammy; 03-12-2014 at 12:06 PM. Reason: @

03-12-2014, 12:08 PM	#18
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: wtb: new ps rag joint ASAP Yes 201...$21 after shipped. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"



Register or Log In To remove these advertisements.

03-12-2014, 01:09 PM	#19
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: wtb: new ps rag joint ASAP If you can't find the Lares. I used Dorman #31015. It was tight and needed to be tapped on.

Register or Log In To remove these advertisements.