AZ Tilt Columns - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 03-01-2014, 09:16 PM

I have 7 Good Van tilts for sale, tilt heads are tight & collars are not bent out of shape or have pry marks.
Some of them have short shift handle & some are the longer truck handle & you can choose which one you want as long as I have one available.

They all have the metal indicator housing & none of them have a pointer.

I have pointers, upper & lower firewall rubber seals available new.
$170 ea shipped.

I have pulled the handles on most of them for shipping.

Most of the turn signal switches are cracked where the turn signal arm screws to it.

If you don't need the housing, or shift handle (for a manual conversion) they are $10 cheaper.

Thanks,
Tom

71 super · 03-01-2014, 11:27 PM

Tom do you have an intermediate shaft for 69-72 truck? I need one for auto conversion in 67 truck. Thanks, harold

Acorn · 03-01-2014, 11:35 PM

I will take the pick of the litter! How much shorter are the van shift handles?

69Rumbler · 03-02-2014, 12:11 AM

I would like one , how much picked up I'll be out there next week for dodger spring training lol

Dirt_Baller · 03-02-2014, 12:30 AM

Is there a difference really between the van and a truck column? If not I need one for a manual.

preacher anthony · 03-02-2014, 12:59 AM

I would like to know the difference too. I have '69 manual that I want to change to tilt/auto.

**t korinek** · 03-02-2014, 01:22 AM

There have been quite a few write ups on how to change a van tilt to work in a truck on this site over the years, if you do a search they show the specifics & the differences, the guys who have taken the time to write it down deserve some credit.

Acorn you get first choice I'll get some pics of the different handles

$150 picked up, I'll be at the good guys show in Scottsdale next fri -sun

If your going to change an auto to manual you will have to do some mods to the bowl that the handle attaches to & modify the neutral switch for an auto & then compress the intermediate shaft.

Harold I do have an intermediate shaft.
Thanks
Tom

Acorn · 03-02-2014, 01:27 AM

Thanks Tom. Look forward to hearing from you.

71 super · 03-02-2014, 06:22 AM

Sending pm tom, thanks! Harold

**truckdude239** · 03-02-2014, 09:14 AM

Im intrested in one with a long handle you do paypal? How much for a pointer?

**t korinek** · 03-02-2014, 12:32 PM

Yes I do Paypal, a pointer is $5 when purchased with a column.
Here's a pic with the different length handle.

**truckdude239** · 03-02-2014, 12:43 PM

paypal sent

**Classic Bowties** · 03-02-2014, 01:21 PM

Here's a picture that I had from last year showing the truck/van shift lever differences side by side. Good luck on your sales Tom. Mel

70 stepside · 03-02-2014, 02:54 PM

Tom, will these bolt right into 1970 c10 or will fab work be needed? do they needed to be rebuilt thanks

03-01-2014, 09:16 PM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Tilt Columns I have 7 Good Van tilts for sale, tilt heads are tight & collars are not bent out of shape or have pry marks. Some of them have short shift handle & some are the longer truck handle & you can choose which one you want as long as I have one available. They all have the metal indicator housing & none of them have a pointer. I have pointers, upper & lower firewall rubber seals available new. $170 ea shipped. I have pulled the handles on most of them for shipping. Most of the turn signal switches are cracked where the turn signal arm screws to it. If you don't need the housing, or shift handle (for a manual conversion) they are $10 cheaper. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-01-2014, 11:27 PM	#2
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Tilt Columns Tom do you have an intermediate shaft for 69-72 truck? I need one for auto conversion in 67 truck. Thanks, harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

03-01-2014, 11:35 PM	#3
Acorn Registered User Join Date: Jul 2013 Location: Winnsboro Texas Posts: 367	Re: Tilt Columns I will take the pick of the litter! How much shorter are the van shift handles?

03-02-2014, 12:11 AM	#4
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Tilt Columns I would like one , how much picked up I'll be out there next week for dodger spring training lol __________________ 1969 C20 CUSTOM "RUMBLEr"

03-02-2014, 12:30 AM	#5
Dirt_Baller Registered User Join Date: Feb 2014 Location: Ft Campbell Posts: 82	Re: Tilt Columns Is there a difference really between the van and a truck column? If not I need one for a manual.

03-02-2014, 12:59 AM	#6
preacher anthony Registered User Join Date: Jul 2013 Location: Pembroke NC Posts: 323	Re: Tilt Columns I would like to know the difference too. I have '69 manual that I want to change to tilt/auto.

03-02-2014, 01:22 AM	#7
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Tilt Columns There have been quite a few write ups on how to change a van tilt to work in a truck on this site over the years, if you do a search they show the specifics & the differences, the guys who have taken the time to write it down deserve some credit. Acorn you get first choice I'll get some pics of the different handles $150 picked up, I'll be at the good guys show in Scottsdale next fri -sun If your going to change an auto to manual you will have to do some mods to the bowl that the handle attaches to & modify the neutral switch for an auto & then compress the intermediate shaft. Harold I do have an intermediate shaft. Thanks Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-02-2014, 01:27 AM	#8
Acorn Registered User Join Date: Jul 2013 Location: Winnsboro Texas Posts: 367	Re: Tilt Columns Thanks Tom. Look forward to hearing from you.

03-02-2014, 06:22 AM	#9
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Tilt Columns Sending pm tom, thanks! Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

03-02-2014, 09:14 AM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Tilt Columns Im intrested in one with a long handle you do paypal? How much for a pointer? __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-02-2014, 12:32 PM	#11
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Tilt Columns Yes I do Paypal, a pointer is $5 when purchased with a column. Here's a pic with the different length handle. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-02-2014, 12:43 PM	#12
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Tilt Columns paypal sent __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-02-2014, 01:21 PM	#13
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,732	Re: Tilt Columns Here's a picture that I had from last year showing the truck/van shift lever differences side by side. Good luck on your sales Tom. Mel Attached Images

03-02-2014, 02:54 PM	#14
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Tilt Columns Tom, will these bolt right into 1970 c10 or will fab work be needed? do they needed to be rebuilt thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.