IL WTB: BBC triple groove crank pulley for SWP

[kxmotox247]

Looking for a steel triple groove pulley... or a double with a add-on single for a power steering pump. All three pulleys should measure 6 3/4" in diameter.

Anyone? Again, this is for a Big Block Chevy with a short water pump.

[budnikguy]

Might have what you need, I will check for you tomorrow.

Adam

[kxmotox247]

Sounds good. Please check and see!

[kxmotox247]

I'll keep the set in mind but really only need the triple pulley for the crank. Unless you mean by a set is the double and single for the crank as an assembly.

[1972 Jimmy]

[ATTACH]1222529[/ATTACH]
Is this what you're looking for? I could do $50 shipped to your door.

[Classic Bowties]

Originally Posted by 1972 Jimmy

Is this what you're looking for? I could do $50 shipped to your door.

That pulley pictured is for the later style long water pump setups only. Mel

[PICKMUP]

Originally Posted by kxmotox247

I'll keep the set in mind but really only need the triple pulley for the crank. Unless you mean by a set is the double and single for the crank as an assembly.

This is the correct set...

[PICKMUP]

Originally Posted by PICKMUP

This is the correct set...

Those are now SOLD locally, but here is a three groove set (6.75"), exactly as you asked for...

[kxmotox247]

Originally Posted by PICKMUP

Those are now SOLD locally, but here is a three groove set (6.75"), exactly as you asked for...

PM sent.

[Classic Bowties]

Originally Posted by kxmotox247

I'll keep the set in mind but really only need the triple pulley for the crank. Unless you mean by a set is the double and single for the crank as an assembly.

The OE 68-72 big block short water pump pulley setups found on these trucks used either a 6 3/4" #418 w/o ac or a 7 1/4" #414 w/ac two groove inner crank pulley and then a separate add on single groove 6 3/4" #525 outer crank pulley for driving the p/s pump single groove pulley #537. Are you planning on running ac, what are the last three digits on your w/p pulley? Your w/p pulley is going to be a factor in which inner crank pulley you can use, w/p pulleys #648, #789 and #797 are the OE big block options. If nobody above can supply you with what you need, I can do any of the above listed combo's for $40. per pulley, already pulled and ready to ship out USPS priority for $12.35 w/tracking. Let me know, Mel.

[leddzepp]

The set that Frank has pictured is the correct set up for a big block with a short water pump.

[kxmotox247]

I'm running aftermarket Alan Grove brackets. Short water pump.
My water pump pulley is 6 1/4". Don't have it in my hand to check the number. I was just going to buy the two I need from Alan Grove but it's a pretty pricey pair new so I was hoping to find an OEM combo on here cheaper.
According to Alan Grove, all three pulleys need to measure 6 3/4 for me with their brackets and a 6 1/4" water pump pulley.

http://www.alangrovecomponents.com/Pulleys_2011.htm

[kxmotox247]

Still looking for the right combo with a 3 groove pulley where all 3 are 6 3/4.

[Classic Bowties]

Originally Posted by kxmotox247

Still looking for the right combo with a 3 groove pulley where all 3 are 6 3/4.

I had given you some detailed info in the above post #9. It looks like Franks above offered set is already cleaned up and ready to bolt on, if I were you I'd confirm that they are the 6 3/4" #418 and the 6 3/4 #525 and then grab them. Again as I had stated in post #9, if nobody can help I have them both available @ $40. ea. + $12.35 for priority shipping. Mel

[budnikguy]

here is mine, direct from a 71 GMC 402....