![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
|
47-53 running board filler panels
Does anyone have any close up pictures of 47-53 running board filler panels? I'm specifically looking for what the tab that bolts to the rear fenders is supposed to look like, mine were gone. I need to re-create them and I'm trying to see what they should look like when done.
Looking for a close up of the back side of the tab: ![]() Thanks!
__________________
build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,519
|
Re: 47-53 running board filler panels
I've got a pair of long wheel base board sitting on saw horses with the fillers on them at home, Let me see if they are all together so I can take a photo or two in about an hour. Everything should be the same except the length.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,519
|
Re: 47-53 running board filler panels
Here is the best photo
![]() link to the four photos that look somewhat presentable plus the bracket on the front end. http://s173.photobucket.com/user/mr4...?sort=4&page=1 I didn't get any measurements though.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
|
Re: 47-53 running board filler panels
Thank you Mr48chev! Looks like it might be thicker than the panel itself, maybe 16 ga?
__________________
build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler |
![]() |
![]() |
![]() |
Bookmarks |
|
|