Any pics of rear gas tanks?

[AcampoDave]

I'm considering the rear mount 17 gallon kit from LMC, maybe even the
the 21 gallon, but I'm not crazy about something that would be highly visible from behind. Curious if anyone wants to post up some rear view pics of their trucks with those kind of tanks.

[Chevy Fleetside]

I have that 20 gal in one of my trucks and I am going to replace it with something else. It really dosn't fit well and yes it dose hang down real low. Check out the first and the last page of this thread and you will see the universal tanks from Tanks Inc. I ordered one from this guy. http://www.leadmineproducts.com/servlet/StoreFront I will be posting pictures of my install also (as soon as I do it)..

[AcampoDave]

Originally Posted by Chevy Fleetside

I have that 20 gal in one of my trucks and I am going to replace it with something else. It really dosn't fit well and yes it dose hang down real low. Check out the first and the last page of this thread and you will see the universal tanks from Tanks Inc. I ordered one from this guy. http://www.leadmineproducts.com/servlet/StoreFront I will be posting pictures of my install also (as soon as I do it)..

Ummm I'm wondering if the link to the thread didn't make it in your post for the universal Tanks inc.Thanks for confirming my suspicions about the big LMC tank tho'.

[Chevy Fleetside]

http://www.67-72chevytrucks.com/vboa...d.php?t=613097

[par4tom]

Here is my 61 with the new rear tank installed. Got this from Performance On-Line and was specific for the wider frame rails on this truck.

21 gallons, stainless steel and fits perfectly. The 63-66 have a lot more options. I liked this one because it fit perfectly and didn't hang too far below the rear bumper.

[vin63]

19 gallon stainless tank…

[Hanket2113]

Hey great info! Referring to the gas tank how much was it I can’t find a stainless one only aluminum on the 1961 c10

Originally Posted by par4tom

Here is my 61 with the new rear tank installed. Got this from Performance On-Line and was specific for the wider frame rails on this truck.

21 gallons, stainless steel and fits perfectly. The 63-66 have a lot more options. I liked this one because it fit perfectly and didn't hang too far below the rear bumper.

Posted via Mobile Device

[BR3W CITY]

Pic is from a low angle, so it looks like it hangs down more than it does, but when using only a rear roll pan, there is more exposed. Gotta love a rear mounted fuel tank, and no rear bumper.



You can see a bit more of how it sits in this video, where I give the worn and oversprayed tank some new love.


https://www.youtube.com/embed/nSowpcqyMXw

[AcampoDave]

Cool, thanks for posting. So far I'm leaning toward the Tanks Inc. universal, but I'm still weighing my options.

[66Project]

Funny you should ask. Im currently elbow deep in making mine. I didnt like any of the options that are out there and I cant bring myself to paying $400 + for a custom one. So I decided to build one myself copying CPPs dimensions on Ebay. 20 Gallons.
I wanted to do aluminium but my tig skills limited me to steel and a mig. Haven't finished it yet but here is some pics of what Ive got so far and one with it mocked up under the bed. Sorry no rear pics yet. Should be able to get some this weekend but its only 8 1/2" at the rear of the tank and most of that is going between the frame. 4 1/2" ish should be hanging out at the bumper.

[vin63]

Originally Posted by 66Project

Funny you should ask. Im currently elbow deep in making mine. I didnt like any of the options that are out there and I cant bring myself to paying $400 + for a custom one. So I decided to build one myself copying CPPs dimensions on Ebay. 20 Gallons.

Very cool. That looks very familiar. I built mine very similarly. I fabricated a couple of additional baffles that went up about 3/4 of the height and spanned front to back with 1/2 x 3 inch cut outs on the bottom for the fuel to pass slowly through side to side. Since I planned for my truck to be pretty low, but also pull a trailer, I made my tank an inch shorter than the aluminum tanks available from the big vendors.

[66LSx]

1966 SWB Fleet frame.....

Boyd Welding Tank bought at Pro Performance (vendor here)

Its for a 1967-72 but fits just fine (had to do a slight relief in the angle crossmember....)

VERY VERY NICE QUALITY...affordable too. (Dunno if you have EFI or not)

[gnd efcs]

Originally Posted by 66Project

Funny you should ask. Im currently elbow deep in making mine. I didnt like any of the options that are out there and I cant bring myself to paying $400 + for a custom one. So I decided to build one myself copying CPPs dimensions on Ebay. 20 Gallons.
I wanted to do aluminium but my tig skills limited me to steel and a mig. Haven't finished it yet but here is some pics of what Ive got so far and one with it mocked up under the bed. Sorry no rear pics yet. Should be able to get some this weekend but its only 8 1/2" at the rear of the tank and most of that is going between the frame. 4 1/2" ish should be hanging out at the bumper.

this looks great ...will rust be a problem ?? I have used to use "kreem" on motorcycle tanks before to seal them up from the inside....

[Chevy Fleetside]

I tried fitting my tanks inc tank today, and it seems I have to trim the lower frame rails by about a 1/4" on each side. No biggie just more time.

[familyfast64]

I can't hardly tell but surely you left room in your steel tank baffle for gas to get inside when it's below a half tank? Looks like you may have left out access holes, don't want to suck the baffled area dry with a half tank? of fuel around it. Lol I'm sure you don't do that tho...

[familyfast64]

Oh, nice job tho, I want to build my own too but I'm waiting to buy a spool gun for aluminum cause I'm gonna try and see if I can get away without it.

[66Project]

Originally Posted by familyfast64

I can't hardly tell but surely you left room in your steel tank baffle for gas to get inside when it's below a half tank? Looks like you may have left out access holes, don't want to suck the baffled area dry with a half tank? of fuel around it. Lol I'm sure you don't do that tho...

Originally Posted by familyfast64

Oh, nice job tho, I want to build my own too but I'm waiting to buy a spool gun for aluminum cause I'm gonna try and see if I can get away without it.

Thanks. There are two corners cut out towards the front on each side. I am debating whether or not I need to fully weld up the sump. Its not like this is a high performance corning truck so it maybe overkill to have the sump at all. It does add some strength.

[kieth]

Originally Posted by AcampoDave

I'm considering the rear mount 17 gallon kit from LMC, maybe even the
the 21 gallon, but I'm not crazy about something that would be highly visible from behind. Curious if anyone wants to post up some rear view pics of their trucks with those kind of tanks.

blazer fuel tank being installed:
http://kieth.smugmug.com/Trucks/66-GMC/i-DrSmCmf

Click on the thumbnails to see how it was installed.

Here you can see how far it is below the rear bumper:
http://kieth.smugmug.com/Trucks/66-GMC/i-MqQqJfG


After the final install with straps, not much shows, this is the 21 gallon blazer tank:
http://kieth.smugmug.com/Trucks/66-GMC/i-jb2dtZs/A

[AcampoDave]

Nice work out there, I know most bed fill caps are usually level with the floor or recessed even, but looking at the Tank's Inc photos, I'm wondering if its going to stick up causing an obstruction to loads. What do you think Chevy Fleetside does it look that way in person too? And Kieth, I'm thinking about doing just what you did to the bed cross sill. Thanks for that. And as far as building a tank from scratch....you got skills!

[kieth]

Originally Posted by AcampoDave

Nice work out there, I know most bed fill caps are usually level with the floor or recessed even, but looking at the Tank's Inc photos, I'm wondering if its going to stick up causing an obstruction to loads. What do you think Chevy Fleetside does it look that way in person too? And Kieth, I'm thinking about doing just what you did to the bed cross sill. Thanks for that. And as far as building a tank from scratch....you got skills!

We later installed a heavy angle iron support under the bed cross sill (outside of frame) to support the cut crossmember. no problems 14,000 miles down the road. Kieth

[GMR-PERFORMANCE]

here you go 62 frame though

[Chevy Fleetside]

I ordered a 70º filler so I could put a side fill in. At this point it probably won't be untill next weekend when I get a chance to work on it again.

[Frizzle Fry]

Just bought one of these. Looks like a much better fit than the blazer/burb tank (with some frame trimming).

[AcampoDave]

Just wanted to thank you all for posting. I decided to go with the Tank's inc. Universal. It holds 16 gallons and thats about all I need. It's also priced right and I do believe I can install it without a lot of difficulty. What a great resource this site is because it really helps to hear from others who have already been there and done that. I'll post a pic or two when I get done.

[Itnkrman]

Originally Posted by AcampoDave

Just wanted to thank you all for posting. I decided to go with the Tank's inc. Universal. It holds 16 gallons and thats about all I need. It's also priced right and I do believe I can install it without a lot of difficulty. What a great resource this site is because it really helps to hear from others who have already been there and done that. I'll post a pic or two when I get done.

Here's a pic of the install on my 62. Let me know if you've got any questions.