![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
3/4 Ton .. Rear End Swap
im thinking about changing my rear end on my truck , so i can run back disc brakes and well get rid of the leaf and get a coli set up . Wondering what you guys used , what years and make will be an bolt up .
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2011
Location: Dallas TX
Posts: 225
|
Re: 3/4 Ton .. Rear End Swap
Dana 60 coil spring rear is what you want. A bit difficult of a rear to find but there are disc brake kits for them. You probably already have a leaf spring HO52 or dana 60 rear- I'd stick with that and just get a disc kit for it.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2011
Location: WV
Posts: 946
|
Re: 3/4 Ton .. Rear End Swap
Personally I like the leaves over the coils. Why are you wanting to swap rears? Is it difficult for you to locate brake parts for the H052 where you are at? s far as disc stuff goes, there are a number of kits out there for the H052. Off the top of my head tsmmfg.com has a nice setup. Also check with the vendors on here. Tere is at least one that does at least the brackets for several applications. It would use the same brackets as a FF14 bolt.
__________________
72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold ![]() 70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap
Yea I thought it over and I'm sticking with leaf and I'm going to see what kind of rear end I got tomorrow
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap , Dana 60 ??
this my rear end its a Dana 60 Right ?
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2006
Location: Porter Ranch, CA
Posts: 978
|
Re: 3/4 Ton .. Rear End Swap
Don't swap the rear end just for the sole purpose of going to disc brakes. I've had a 3/4 ton and a 1 ton and let me tell you, those rear drums will stop a freight train and not break a sweat! The fronts are what should be converted to disc.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2013
Location: Northern Santa Barbara County, California
Posts: 2,677
|
Re: 3/4 Ton .. Rear End Swap
That is a DANA 60, you can see the 60 to right of the filler hole right below the plug weld hole
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap
Awesome thanks !
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2013
Location: Northern Santa Barbara County, California
Posts: 2,677
|
Re: 3/4 Ton .. Rear End Swap
Here it is
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap
LMC is good for something hha
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2011
Location: Dallas TX
Posts: 225
|
Re: 3/4 Ton .. Rear End Swap
...and a factory rear swaybar too , nice score.
|
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: 3/4 Ton .. Rear End Swap
I like the leaf springs better, mine has coils so that what I live with..
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap
Yea I just need to find a good deal on a set of springs .. They arnt to expensive but shipping it's killer .
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2007
Location: Topeka,KS
Posts: 778
|
Re: 3/4 Ton .. Rear End Swap
Being in LA you should be able to find a shop that "makes" leaf stacks. I had some made for a 94 I had. I just had to measure the width. What they do is build a stack out of leaf stock they have on hand. They will make you a new set of u-bolts also.
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member). |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Re: 3/4 Ton .. Rear End Swap
In going to call around tomorrow most places I called were out of business ..
__________________
1969 C20 CUSTOM "RUMBLEr" |
![]() |
![]() |
![]() |
Bookmarks |
|
|