New... Everything! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr Handy · 03-30-2014, 09:33 PM

ECE 3.5"/5" drop went in this weekend!
Same as there 4/6 kit, just had them swap the springs.
As well as 6 lug disk brake swap.
All new grade 8 hardware wherever I could put it, and a good tube of anti seize!
Everything went in without a hitch!

Mr Handy · 03-30-2014, 09:39 PM

Also replaced to trailing arm bushings, and ball joints!

Had a set of stock 4 nub steelies powder coated last week, still need to get new rubber on the back, but I want to wait to get the 350 long block that arrived Friday in, so I can have a little fun

... the long block will have to wait while I gather all the new parts.

I will try and get a few more picks of the stance tomorrow, Ran out of light today.

elf w/capital T · 03-30-2014, 09:54 PM

Nicceee

cool68 · 03-31-2014, 04:44 PM

Cool - already have power brakes?

bruceman1968 · 03-31-2014, 05:22 PM

Nice work Mr Handy, Stance looks great. Your going to like those disk brakes.

Mr Handy · 03-31-2014, 06:26 PM

cool68, yes I had power brakes, and the booster was rebuilt a few years ago.

Bruce, I was thinking that the front might be a little low, but as soon as I drove it I loved it, I may have to drop the back a little more to level it out...

I still want to be able to use it, so I may need to do the bolt/weld in notch and a pair of helper bags, then haul all day long. Steve and me bouncing on the step bumper could not get it to bottom out on the stock bump stops... can't wait to get the 350 in it!

03-30-2014, 09:33 PM	#1
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	New... Everything! ECE 3.5"/5" drop went in this weekend! Same as there 4/6 kit, just had them swap the springs. As well as 6 lug disk brake swap. All new grade 8 hardware wherever I could put it, and a good tube of anti seize! Everything went in without a hitch! Attached Images Last edited by Mr Handy; 03-30-2014 at 09:46 PM.

03-30-2014, 09:39 PM	#2
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: New... Everything! Also replaced to trailing arm bushings, and ball joints! Had a set of stock 4 nub steelies powder coated last week, still need to get new rubber on the back, but I want to wait to get the 350 long block that arrived Friday in, so I can have a little fun ... the long block will have to wait while I gather all the new parts. I will try and get a few more picks of the stance tomorrow, Ran out of light today. Attached Images Last edited by Mr Handy; 03-30-2014 at 09:49 PM.

03-30-2014, 09:54 PM	#3
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 993	Re: New... Everything! Nicceee

03-31-2014, 04:44 PM	#4
cool68 Registered User Join Date: Oct 2013 Location: Stockton, CA Posts: 475	Re: New... Everything! Cool - already have power brakes?

03-31-2014, 05:22 PM	#5
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: New... Everything! Nice work Mr Handy, Stance looks great. Your going to like those disk brakes. __________________ CHEVY/GMC VIN DECODERS

03-31-2014, 06:26 PM	#6
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: New... Everything! cool68, yes I had power brakes, and the booster was rebuilt a few years ago. Bruce, I was thinking that the front might be a little low, but as soon as I drove it I loved it, I may have to drop the back a little more to level it out... I still want to be able to use it, so I may need to do the bolt/weld in notch and a pair of helper bags, then haul all day long. Steve and me bouncing on the step bumper could not get it to bottom out on the stock bump stops... can't wait to get the 350 in it!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.