AD windlace track - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crossfire84 · 03-31-2014, 07:12 PM

What do you do when your truck no longer has the wind lace track in the cab? Is there a replacement? Thanks.

MARTINSR · 03-31-2014, 07:34 PM

I don't know but the 47-48 had a different windlace that was not held into that weird little track that is welded to the body. What they used was a screw in metal trim that runs around the door holding the windlace. That may be available or you could simply just make something like that. It does use a different windlace of course.

Brian

S10Fan · 03-31-2014, 08:32 PM

Following this, same issue here. I need about 4' of track for my 50

**chev3600** · 03-31-2014, 08:32 PM

03-136. Classicparts.com carries the windlace channel for each door. Looks like they are out if stock at the moment for the left door, but you can bet other suppliers have the same stuff.

crossfire84 · 04-01-2014, 05:38 PM

Quote:

Originally Posted by chev3600

03-136. Classicparts.com carries the windlace channel for each door. Looks like they are out if stock at the moment for the left door, but you can bet other suppliers have the same stuff.

THANK YOU! just talked to them and thats what i need, these are held on by screws the rep said.

03-31-2014, 07:12 PM	#1
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	AD windlace track What do you do when your truck no longer has the wind lace track in the cab? Is there a replacement? Thanks. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

03-31-2014, 07:34 PM	#2
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: AD windlace track I don't know but the 47-48 had a different windlace that was not held into that weird little track that is welded to the body. What they used was a screw in metal trim that runs around the door holding the windlace. That may be available or you could simply just make something like that. It does use a different windlace of course. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

03-31-2014, 08:32 PM	#3
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: AD windlace track Following this, same issue here. I need about 4' of track for my 50 __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

03-31-2014, 08:32 PM	#4
chev3600 Senior Member Join Date: Jan 2009 Location: Raleigh, NC Posts: 444	Re: AD windlace track 03-136. Classicparts.com carries the windlace channel for each door. Looks like they are out if stock at the moment for the left door, but you can bet other suppliers have the same stuff. __________________ 1949/1954 with LS swap-yeah! http://s260.photobucket.com/albums/i...0/AD%20trucks/jumbled mess of unorganized photos



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.