Front fender badges for 67-72 GMC trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nasqar · 04-03-2014, 05:51 PM

I know the Chevy trucks had the C10 badges on the front fenders, but what did the GMC trucks have? Was it still the same or was it different? I know there were several different Chevy ones with Custom, Cheyenne, but I am looking for the comparable C10 on a GMC truck front fender. If anyone has a clear up close pic of a good one, please post it as well.

Thanks for the help!

Steve Hafner · 04-03-2014, 06:08 PM

. . . .

I think THESE would be the ones:

. . . .

SS Tim · 04-03-2014, 06:18 PM

Mostly it depends on the trim level. But there are variations for 4x4, engines and Custom Camper too. Generally the lower name plate description changes. Canadian trucks used 9XX series badges. Plus there were the early Camper Cruisers fender badges way up front and Sierra & Grande out back on later wideside beds. Here is a catalog page from the Truck Shop as a very general idea. Special-K could probably get you up to speed on an exact year, trim and model usage.

Willys47 · 04-03-2014, 07:58 PM

in canada it is this

**special-K** · 04-03-2014, 08:10 PM

In '67 GMCs had no fender badge unless it had the mid-level "Custom" script or top-of-the-line Super Custom verticle rectangle badge with "Custom" script at the top. In '68 GMC started using the same badge they used through '72. As shown,they have GMC in red letters up top and a narrow rectangle under the shows the series (1500,2500,3500,all the way up to 9500). In '68 they started with the insert telling engine type (V-Six,V-Eight,Diesel) and Custom script on the door,if not a base level. In '69 the inserts would say Custom and Super Custom and no mention of engine unless a base model. The Sierra and Sierra Grande came out in late-69 yet were only an option added to the trim level. It wasn't till '71 that the Sierra and Sierra Grande became their own trim level and that's when the Sierra and Sierra Grande inserts were added.

nasqar · 04-03-2014, 08:17 PM

WOW, so much for simple, lol. I will probably just stay with GMC then. Thank you sooooo much for the insight.

04-03-2014, 05:51 PM	#1
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Front fender badges for 67-72 GMC trucks I know the Chevy trucks had the C10 badges on the front fenders, but what did the GMC trucks have? Was it still the same or was it different? I know there were several different Chevy ones with Custom, Cheyenne, but I am looking for the comparable C10 on a GMC truck front fender. If anyone has a clear up close pic of a good one, please post it as well. Thanks for the help!

04-03-2014, 06:08 PM	#2
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Front fender badges for 67-72 GMC trucks . . . . I think THESE would be the ones: . . . . Attached Images

04-03-2014, 06:18 PM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Front fender badges for 67-72 GMC trucks Mostly it depends on the trim level. But there are variations for 4x4, engines and Custom Camper too. Generally the lower name plate description changes. Canadian trucks used 9XX series badges. Plus there were the early Camper Cruisers fender badges way up front and Sierra & Grande out back on later wideside beds. Here is a catalog page from the Truck Shop as a very general idea. Special-K could probably get you up to speed on an exact year, trim and model usage. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

04-03-2014, 07:58 PM	#4
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: Front fender badges for 67-72 GMC trucks in canada it is this Attached Images __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

04-03-2014, 08:10 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Front fender badges for 67-72 GMC trucks In '67 GMCs had no fender badge unless it had the mid-level "Custom" script or top-of-the-line Super Custom verticle rectangle badge with "Custom" script at the top. In '68 GMC started using the same badge they used through '72. As shown,they have GMC in red letters up top and a narrow rectangle under the shows the series (1500,2500,3500,all the way up to 9500). In '68 they started with the insert telling engine type (V-Six,V-Eight,Diesel) and Custom script on the door,if not a base level. In '69 the inserts would say Custom and Super Custom and no mention of engine unless a base model. The Sierra and Sierra Grande came out in late-69 yet were only an option added to the trim level. It wasn't till '71 that the Sierra and Sierra Grande became their own trim level and that's when the Sierra and Sierra Grande inserts were added. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-03-2014, 08:17 PM	#6
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Re: Front fender badges for 67-72 GMC trucks WOW, so much for simple, lol. I will probably just stay with GMC then. Thank you sooooo much for the insight.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.