Flaming River steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jay-dawg · 07-28-2003, 05:03 AM

Hi guys,
Just wanted to know who has installed a Flaming River column. I'm looking to get a tilt/auto column shift one. Anyone got the dimensions or have the part number that they used?

Thanks in advance.
Jay

Wootdog · 07-28-2003, 08:06 AM

Does this column you're talking about have the key on the colummn? IF so I would be interested in finding out also. Wootdog

Wootdog · 07-28-2003, 08:07 AM

I would be looking at without AT on the column. I will be using a floor shift. Wootdog

lux hauler · 07-28-2003, 09:14 AM

http://www.flaming-river.com/truck-col.htm

MOTHERTRUCKERS · 07-28-2003, 09:30 AM

FR20003 steel tilt floor shift column 35". We sell them for 309.00. Easy install with 2 Borgansen joints and 2 foot of DD shaft. A borgansen joint is needed to attach the column to a length of DD shaft ( looks like the intermediate shaft in our trucks) then another borgansen joint attaches to the steering box.

jay-dawg · 08-01-2003, 01:26 PM

thanks guys.

jay

Brewski* · 08-01-2003, 03:09 PM

Frank Ham has installed them his handle is PICKMUP. He sells them also. I am going with if they ever make them for floor shift.

Wootdog · 08-01-2003, 04:43 PM

you can get one with the ignition on the column also. I need to know the total cost for all and how hard it is to put in. IE I don't know what this shaft stuff Mother truckers is talking about. And how is this stuff connected with these joints? Thanks in advance Wootdog

MOTHERTRUCKERS · 08-01-2003, 06:58 PM

see above.

Wootdog · 08-01-2003, 07:21 PM

Ed I sent you an email. Wootdog

jay-dawg · 08-02-2003, 05:13 AM

thanks guys,
I checked the flaming river site and it doesn't mention ignition on the column. I'll probably put a push button start and hide it somewhere. another cool anti theft deterrent.

jay

07-28-2003, 05:03 AM	#1
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Flaming River steering column Hi guys, Just wanted to know who has installed a Flaming River column. I'm looking to get a tilt/auto column shift one. Anyone got the dimensions or have the part number that they used? Thanks in advance. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

07-28-2003, 08:06 AM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	re steering column Does this column you're talking about have the key on the colummn? IF so I would be interested in finding out also. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

07-28-2003, 08:07 AM	#3
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	re re I would be looking at without AT on the column. I will be using a floor shift. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

07-28-2003, 09:14 AM	#4
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	http://www.flaming-river.com/truck-col.htm __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

07-28-2003, 09:30 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	FR20003 steel tilt floor shift column 35". We sell them for 309.00. Easy install with 2 Borgansen joints and 2 foot of DD shaft. A borgansen joint is needed to attach the column to a length of DD shaft ( looks like the intermediate shaft in our trucks) then another borgansen joint attaches to the steering box. __________________ Rest in Peace Ed. Thanks for all the good times. Last edited by MOTHERTRUCKERS; 08-01-2003 at 06:57 PM.

08-01-2003, 01:26 PM	#6
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks guys. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

08-01-2003, 03:09 PM	#7
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Frank Ham has installed them his handle is PICKMUP. He sells them also. I am going with if they ever make them for floor shift.

08-01-2003, 04:43 PM	#8
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Find out if you can get one with the ignition on the column also. I need to know the total cost for all and how hard it is to put in. IE I don't know what this shaft stuff Mother truckers is talking about. And how is this stuff connected with these joints? Thanks in advance Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

08-01-2003, 06:58 PM	#9
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	see above. __________________ Rest in Peace Ed. Thanks for all the good times.

08-01-2003, 07:21 PM	#10
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Mother truckers Ed I sent you an email. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

08-02-2003, 05:13 AM	#11
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks guys, I checked the flaming river site and it doesn't mention ignition on the column. I'll probably put a push button start and hide it somewhere. another cool anti theft deterrent. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.