|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-28-2014, 10:27 AM
|
#1 |
|
Junior Member
 Join Date: Dec 2013
Location: S. Lake Tahoe Ca
Posts: 35
|
Rear frame crossmember help
Hey guys I need a little help. Does anybody know if the rear crossmembers on our trucks differ from year to year or model to model? The reason I ask is the po installed a pretty useless tow hitch, and removed the crossmembers. So I am not really sure what I am missing. I have a 71 swb 4x4.
Any help would appreciated, Thanks Rich |
|
|
|
05-29-2014, 12:37 AM
|
#2 |
|
Registered User
Join Date: Jun 2007
Location: Lacey, Wa
Posts: 181
|
Re: Rear frame crossmember help
I would like to help with pictures but I have coils not leafs so that wont help any. What I would do is going through the build section and look at a bunch of different pictures. Those might be able to answer your question.
__________________
1970  C20 Camper SpecialSBC350 / TH350 '84 C20 Front Disc Brakes/Control Arms |
|
|
|
|
05-29-2014, 12:42 AM
|
#3 |
|
Junior Member
Join Date: Dec 2013
Location: S. Lake Tahoe Ca
Posts: 35
|
Re: Rear frame crossmember help
Thanks for the reply
The assembly and service manuals weren't much help. I check for some photos next |
|
|
|
|
05-29-2014, 02:10 AM
|
#4 |
|
Registered User
Join Date: Mar 2014
Location: Comox B.C.
Posts: 46
|
Re: Rear frame crossmember help
M 70 k10 has a bent rear crossmember so I did some snooping. All the trucks I have checked under seem to have the same one. Pretty basic design, riveted to the rails by the rear hangers. ECE has a replacement one on their site...the only one I've seen. There should be corresponding holes to fit it in place....Rick
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
