"Drews Chevy Blues" 68 C10

[Aronjr84dd]

So I have been lurking on the site for years and have enjoyed borrowing ideas and watching the progress from other people and their builds... Im about 2 and a half weeks into the build I have tried to take pictures of what I have done along the way .... this truck started out as a long bed with a blown motor and 3 on the tree...I will list the planned mods and their progress below.. I had all of the typical rust issues inner/outer rocker/cab support/cab corners ... that took up the first week of work

-LT1/4l60e --- wiring harness modified, engine bolted in and crossmember made
-power window/door lock kit/ not installed yet
-wildwood rear disc brake kit / not installed yet
- eaton posi/ not installed yet
- drop spindle and wildwood front disc brake kit / not installed yet
-rear shock relocation / currently working on it
-C notch / currently working on it
Air bags Airlift D2600 and accuair VU4 manifold and speed controller/ not installed
- power steering/ not yet in stalled
- After market A/C / not yet purchased ... undecided on which one
- homemade buddy bucket seat / made and at the interior shop
- new wiring harness / not yet installed
- Tanks inc fuel injection tank / mounts made/ removed until frame is done
- SS exhaust / half made


I think that's the majority of if .. this week I plan on finishing up everything in the rear, I made my own shock relocation brackets and panhard bar.

Next I will move to the front so that I can get all of the airbag stuff done so that I can paint the frame and move to the body next.

Im doing all of the work at my buddies shop, but I seem to be making decent progress... please feel free to give any input or suggestions thanks

[Aronjr84dd]

..

[Aronjr84dd]

more

[Aronjr84dd]

some more

[Aronjr84dd]

yet more

[Aronjr84dd]

till tomorrow

[VA72C10]

Nice looking build. Frame/components look great!

[Aronjr84dd]

Thanks!! I had to move on to the motor because the eaton posi that I ordered was the wrong one so I will have to wait for a new one to finish up the suspension, I tore the motor down yesterday and cleaned/blasted everything. I will paint it the same color as the truck will be tomorrow, I think I should look good with the finned valve covers .. we'll see

[Aronjr84dd]

Got some paint on the old motor.... its the same color that the truck will eventually be

[Aronjr84dd]

got the motor back in and the front end together and front bags are in.. that will be the ride height aired out .... I wont be laying frame but should be able to drive if a bag pops

[mcbassin]

Great looking project. You did a real nice job on the chassis. subscribed....

[Aronjr84dd]

Thanks for the positive words.... I got the rearend under it and started on smoothing the firewall

[Aronjr84dd]

one more