|
06-15-2014, 11:22 PM | #1 |
Registered User
Join Date: Sep 2013
Location: dallas, tx
Posts: 62
|
My bed is crooked
So the bed on my truck does not sit level with the cab. The front of the bed is lower by an inch about. The wood is not in it, but is there something missing like a spacer or bushing? The cross bars of the bed sit right on top of the mount. Im sure this has been asked before but i dont know what to put in to search for it.
|
06-16-2014, 03:38 AM | #2 |
Registered User
Join Date: Jan 2006
Location: LA, CA
Posts: 296
|
Re: My bed is crooked
If the wood is not in the bed then there's 3/4 of an inch right there. The wood goes between the bedside and the cross bars so if it's gone and your bedsides are sitting directly on the cross bar then the bed will be lower than stock. Some parts books also show a thick rubber pad that goes between the frame and the cross bars which would also give you some height.
__________________
Panel Beaters C.C. |
06-16-2014, 05:16 PM | #3 |
Registered User
Join Date: Sep 2013
Location: dallas, tx
Posts: 62
|
Re: My bed is crooked
Cool thats what i needed to know thanks! Making sure i wasnt missing something.
|
06-16-2014, 07:02 PM | #4 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: My bed is crooked
Yep...mine does the same thing...cause the wood isn't in it...the right rear is higher then the left rear...almost thought the frame was tweaked its so bad! LOL!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
06-17-2014, 12:44 PM | #5 |
Registered User
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
|
Re: My bed is crooked
did the rubber pads come in all yrs 60-66? my 61 didn't have them?
__________________
1961 chevy K10 my build is------------61K10 build |
06-17-2014, 09:54 PM | #6 |
Registered User
Join Date: May 2014
Location: Newport News VIRGINIA
Posts: 360
|
Re: My bed is crooked
From what I've been told the rubber was not a factory-installed item. It was installed as a aftermarket add on so you didn't have a metal on metal surface.
|
06-17-2014, 11:27 PM | #7 |
Registered User
Join Date: Sep 2013
Location: dallas, tx
Posts: 62
|
Re: My bed is crooked
I have thin rubber pads on one side of mine i think
|
Bookmarks |
|
|