VA Speedwarning parts or complete cluster

[VA72C10]

I'd sell the parts for someone to make a show quality Speedwarning tach dash for 460 shipped. ( NO printed circuit, NO tach, No lens, No gauges other than the speedwarning speedometer) with:

• restored tach tin with correct grounding pin
• inner tach tin
• original s/w bezel (think it's a 67 bezel-I will confirm)
• original buzzer and wiring
• original cable with nice adjustment knob and nut included
• Really nice speedwarning head (tested to work w/ buzzer and wiring)
• I will include three matching restored back tins for the oil pressure gauge, temp and ammeter, and fuel gauge.

Or all the same listed above with a tach/vac or air inner tin swapped for 510 shipped

Or, I can put one together with my nicest OE parts, nice factory lens, new bezel, new printed circuit, and new temp gauge with a show quality factory 8 cyl tach or professionally restored show quality 6 cyl tach for 820 shipped with insurance. Will include tach wiring harness for points or HEI and correct wiring and buzzer. All tested working.

First to say they will take it in the thread.

[jabborabbo]

What color is the assumed '67 bezel? I'm interested if it's medium fawn....

[VA72C10]

Originally Posted by jabborabbo

What color is the assumed '67 bezel? I'm interested if it's medium fawn....

it's black with silver edges

[jabborabbo]

Originally Posted by VA72C10

it's black with silver edges

Is it a '67? That is, does it just say "Wipers" on the left rather than "Wipers-Washer"?

[TBONE1964]

Originally Posted by jabborabbo

Is it a '67? That is, does it just say "Wipers" on the left rather than "Wipers-Washer"?

I am not going to crash the thread but I do need some education on these early cluster bezels.

[jabborabbo]

Originally Posted by TBONE1964

I am not going to crash the thread but I do need some education on these early cluster bezels.

Don't quote me since I'm just a doofus, but I think that '67s just have "Wipers" on the upper left and '68s have "Wipers/Washer" on the upper left.... Any experts out there are free to chime in....

[leddzepp]

The adjuster knobs are easy to find on eBay: http://m.ebay.com/itm/281117076852?nav=SEARCH

[jabborabbo]

Originally Posted by leddzepp

The adjuster knobs are easy to find on eBay: http://m.ebay.com/itm/281117076852?nav=SEARCH

Thank you Sir!

Originally Posted by VA72C10

I just looked again and can't find the rubber knob for the adjuster knob. Considering that I'd do the 600 including shipping for everything else:

• restored tach tin with correct grounding pin
• inner tach tin
• original s/w bezel (think it's a 67 bezel-I will confirm)
• original buzzer and wiring
• original cable with nut included (no knob)
• Really nice speedwarning head (tested to work w/ buzzer and wiring)
• I will include three matching restored back tins for the oil pressure gauge, temp and ammeter, and fuel gauge.
• the original 6 cylinder tach with the restored back in the other thread.

Also, I'll include a tach harness in your choice of points or HEI

To be clear, I will need to clear 600 as shipping with 600 insurance won't be cheap Either paypal as personal funds, cover the fees, or send a money order or check (will ship after funds clear) Thanks
Let me know

I'll take it. I'll send out a USPS money order tomorrow.

Thanks!

[VA72C10]

Originally Posted by leddzepp

The adjuster knobs are easy to find on eBay: http://m.ebay.com/itm/281117076852?nav=SEARCH

Thanks!

Originally Posted by jabborabbo

I'll take it. I'll send out a USPS money order tomorrow.

Thanks!

pm sent to make sure you have the address

[jabborabbo]

Got the bezels today...they look good...tried to PM you but your inbox is full.

Thanks!