Trans kickdown bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hugh Mongus · 07-09-2014, 12:38 PM

Can anyone tell me where I could get a kick down bracket for a TH350 that will work with vortec heads/intake?

I bought the vortec bracket from Jegs but it doesn't work.

**bigmac73** · 07-09-2014, 02:32 PM

i had to buy the edelbrock black bracket and so some minor cutting and welding to make it work, but it still dose not allow the throttle to open all the way

i asked Summit racing they suggested trick flow (TFS-20000) bracket. I have not bought it yet

Procurement_man · 07-09-2014, 03:05 PM

Holley 20-95 will do Trans and accelerator mounts off the carb stud.

**bigmac73** · 07-10-2014, 09:05 AM

I have the Holley 20-95 now , but it is too close for the kickdown cable and I guess i my cable is too long??

Hugh Mongus · 07-11-2014, 04:09 PM

Could someone post a picture of there kick down setup that has converted to vortec heads please? Preferably with a TH350.

Thanks

Sammy · 07-11-2014, 08:11 PM

If I remember correctly it took some slight mods to get mine to fit correctly...Holley carb..

Hugh Mongus · 07-12-2014, 08:04 AM

Thanks

07-09-2014, 12:38 PM	#1
Hugh Mongus Registered User Join Date: Jan 2014 Location: Tulsa, OK Posts: 360	Trans kickdown bracket Can anyone tell me where I could get a kick down bracket for a TH350 that will work with vortec heads/intake? I bought the vortec bracket from Jegs but it doesn't work. __________________ -Jason USN Retired

07-09-2014, 02:32 PM	#2
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Trans kickdown bracket i had to buy the edelbrock black bracket and so some minor cutting and welding to make it work, but it still dose not allow the throttle to open all the way i asked Summit racing they suggested trick flow (TFS-20000) bracket. I have not bought it yet __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

07-09-2014, 03:05 PM	#3
Procurement_man Registered User Join Date: Sep 2012 Location: Piedmont, OK Posts: 64	Re: Trans kickdown bracket Holley 20-95 will do Trans and accelerator mounts off the carb stud. __________________ "God will often give you more than you can handle so you can learn to depend on him rather than on yourself" ...Craig Groeschel

07-10-2014, 09:05 AM	#4
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Trans kickdown bracket I have the Holley 20-95 now , but it is too close for the kickdown cable and I guess i my cable is too long?? __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

07-11-2014, 04:09 PM	#5
Hugh Mongus Registered User Join Date: Jan 2014 Location: Tulsa, OK Posts: 360	Re: Trans kickdown bracket Could someone post a picture of there kick down setup that has converted to vortec heads please? Preferably with a TH350. Thanks __________________ -Jason USN Retired

07-11-2014, 08:11 PM	#6
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Trans kickdown bracket If I remember correctly it took some slight mods to get mine to fit correctly...Holley carb.. Attached Images __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-12-2014, 08:04 AM	#7
Hugh Mongus Registered User Join Date: Jan 2014 Location: Tulsa, OK Posts: 360	Re: Trans kickdown bracket Thanks __________________ -Jason USN Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.