Last Chance!! $75 TRUCK!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nejeff · 08-05-2003, 09:11 PM

Going to scrap heap Thursday afternoon. Any takers?? You must get by Thursday! Roadtrip anyone??

Lincoln Nebraska

nejeff · 08-05-2003, 09:12 PM

Pic 2

nejeff · 08-05-2003, 09:13 PM

Pic 3

*Phillip Johnson* · 08-05-2003, 09:28 PM

Where did my doors go???? LOL I wanted them!

nejeff · 08-05-2003, 09:33 PM

Got a guy coming from KC ( Kansas City) tomorrow for them. Take this off my hands and it won't have to be recycled into soup cans Phil! Believe it or not the salvage yards don't want it...Or I should say they'll "take it off my hands" for nothing. Go figure that, theres still alot of good parts and a good drivers fender here. Any way I'm rambling. Bye.

Tx Firefighter · 08-05-2003, 09:39 PM

Man, that sucks.....

I'd sure like to have that 5 lug stuff. Opportunity never knocks on my door. Texas is too far away from you.

*Phillip Johnson* · 08-05-2003, 09:42 PM

I would have been there the first day. These are harder to find every day.. I just looked a a Cheyenne Super with a 402 in it.. Now Im waiting for the guy to give me a price.. the truck is complete with an option sheet a mile long but not a straight piece of metal on it.. Go figure

*Phillip Johnson* · 08-05-2003, 09:43 PM

Texas is alot closer than Oregon by 2000 miles

72_chevy · 08-05-2003, 10:02 PM

i dont really need the whole truck just the bed im in denver colorado but i might be able to work sumthing to take the truck hows the other bed side? does the cab have a lot of rust? thanks nick

**old Rusty C10** · 08-05-2003, 10:24 PM

why oh why do you live in NEBRASKA?????? id buy it in a heartbeat!!!!

angelsairman · 08-05-2003, 11:35 PM

does it have an autoamtic in it???? I need a crossmember to go in my 71 C10..........

nejeff · 08-05-2003, 11:42 PM

The other bedside is ok, bed itself it rusty and thru in places.

Has a manual in it, sorry.

Anybody close want this baby?? Speak up now or forever hold your peace!

nejeff · 08-05-2003, 11:43 PM

In case you wanted to know it's a 72'. Has disk brake front.

ChrisK10 · 08-05-2003, 11:56 PM

Could you list all the good/salvagable parts left? Thanks.

nejeff · 08-06-2003, 12:04 AM

-Front Disc Brake setup
-Drivers fender is pretty good
-Bedsides pretty good, bed is rusty
-3-speed Tranny worked fine
-Park brake cable setup
-Radiator Support
-Master Cylinder
-Glass is good

Just a few off top of my head. No one, and I mean no one can look at the pix and argue that there's not $75 worth of stuff on it.

Thanks alot

**68Custom** · 08-06-2003, 01:14 AM

Wow, i will be moving your way hopefully at the end of this year. I have a semester to go at the Juco im attending and then i hope to get into UNL. Maybe we will run into each other down the road sometime. What about the salvage yard in Wymore? Won't he take it? Sorry to see such a good parts truck not be put to good use, but i hope you find someone to help you out! Good Luck!

Aaron

HOTFUN · 08-06-2003, 02:25 AM

Sent you a PM as I am sure my buddy is going to take it.

nejeff · 08-06-2003, 12:37 PM

Thanks for passing on the word Hotfun

Jeff

Truckboy · 08-06-2003, 01:37 PM

Hey I just saw this. Do you still have it? I'd be willing to come get it thursday.

Mark
I live 11 miles south of Syracuse

rambler · 08-06-2003, 03:39 PM

I'm interested as well,, but I couldn't get it till Sunday,, I'm in KC as well,, I really really need the 5 lug rear end... and the bed looks to be in better shape than mine! Let me (all of us) know

rambler · 08-06-2003, 03:39 PM

I'm interested as well,, but I couldn't get it till Sunday,, I'm in KC as well,, I really really need the 5 lug rear end... and the bed looks to be in better shape than mine! Let me (all of us) know

Longhorn Man · 08-06-2003, 05:13 PM

I can't believe the srap yard won't give you a $ per pound value. Who cares if it is only $42 a ton...,you'd at least get a pack of smokes out of it.
If only i was closer, I do see some parts I could use there.

teeitup · 08-06-2003, 06:13 PM

Scrap is way down around here, the last five trucks I've hauled in $27 tops per truck, it sucks the price being low. They were parted out just about the same as this one.

Maximum Overdrive · 08-06-2003, 07:35 PM

If you cant find a buyer and have to scrap it at least pull some of the basic parts off like those emblems on the fenders.

nejeff · 08-06-2003, 08:53 PM

No Max is wouldn't be right to take away it's emblems...it's like it's badges.

"badges? We don't need no stinking badges"

08-05-2003, 09:11 PM	#1
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	Last Chance!! $75 TRUCK!! Going to scrap heap Thursday afternoon. Any takers?? You must get by Thursday! Roadtrip anyone?? Lincoln Nebraska Attached Images __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 09:12 PM	#2
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	Pic 2 Pic 2 Attached Images __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 09:13 PM	#3
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	pic 3 Pic 3 Attached Images __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 09:33 PM	#5
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	Hi Phil! Got a guy coming from KC ( Kansas City) tomorrow for them. Take this off my hands and it won't have to be recycled into soup cans Phil! Believe it or not the salvage yards don't want it...Or I should say they'll "take it off my hands" for nothing. Go figure that, theres still alot of good parts and a good drivers fender here. Any way I'm rambling. Bye. __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 09:39 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Man, that sucks..... I'd sure like to have that 5 lug stuff. Opportunity never knocks on my door. Texas is too far away from you. __________________ I'm on the Instagram- @Gearhead_Kevin

08-05-2003, 09:28 PM	#4
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	Where did my doors go???? LOL I wanted them!

08-05-2003, 09:42 PM	#7
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	I would have been there the first day. These are harder to find every day.. I just looked a a Cheyenne Super with a 402 in it.. Now Im waiting for the guy to give me a price.. the truck is complete with an option sheet a mile long but not a straight piece of metal on it.. Go figure

08-05-2003, 09:43 PM	#8
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	Texas is alot closer than Oregon by 2000 miles

08-05-2003, 10:02 PM	#9
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	i dont really need the whole truck just the bed im in denver colorado but i might be able to work sumthing to take the truck hows the other bed side? does the cab have a lot of rust? thanks nick __________________ 1972 chevy 3/4 350/350 ps pb a hoss in the making 1967 dodge powerwagon 2ton 4 wheel drive(will climb over anythign)FOR SALE

08-05-2003, 10:24 PM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	why oh why do you live in NEBRASKA?????? id buy it in a heartbeat!!!! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-05-2003, 11:35 PM	#11
angelsairman Future Owner Join Date: Jul 2003 Location: Grand Forks AFB, ND Posts: 151	does it have an autoamtic in it???? I need a crossmember to go in my 71 C10.......... __________________ Its not the end result that counts most...its the journey along the way that's most rewarding My truck doesn't leak, it just marks it's territory

08-05-2003, 11:42 PM	#12
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	The other bedside is ok, bed itself it rusty and thru in places. Has a manual in it, sorry. Anybody close want this baby?? Speak up now or forever hold your peace! __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 11:43 PM	#13
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	1972 In case you wanted to know it's a 72'. Has disk brake front. __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-05-2003, 11:56 PM	#14
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	Could you list all the good/salvagable parts left? Thanks. __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

08-06-2003, 12:04 AM	#15
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	-Front Disc Brake setup -Drivers fender is pretty good -Bedsides pretty good, bed is rusty -3-speed Tranny worked fine -Park brake cable setup -Radiator Support -Master Cylinder -Glass is good Just a few off top of my head. No one, and I mean no one can look at the pix and argue that there's not $75 worth of stuff on it. Thanks alot __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)



Register or Log In To remove these advertisements.

08-06-2003, 01:14 AM	#16
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Wow, i will be moving your way hopefully at the end of this year. I have a semester to go at the Juco im attending and then i hope to get into UNL. Maybe we will run into each other down the road sometime. What about the salvage yard in Wymore? Won't he take it? Sorry to see such a good parts truck not be put to good use, but i hope you find someone to help you out! Good Luck! Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

08-06-2003, 02:25 AM	#17
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Sent you a PM as I am sure my buddy is going to take it. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-06-2003, 12:37 PM	#18
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	Thanks for passing on the word Hotfun Jeff __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

08-06-2003, 01:37 PM	#19
Truckboy Registered User Join Date: Jan 2001 Location: Nebraska Posts: 251	Still got it? Hey I just saw this. Do you still have it? I'd be willing to come get it thursday. Mark I live 11 miles south of Syracuse __________________ 70 c-10 72 c-20 85 Custom 1/2 ton (Former construction truck with 247,000 miles)

08-06-2003, 03:39 PM	#20
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	I'm interested as well,, but I couldn't get it till Sunday,, I'm in KC as well,, I really really need the 5 lug rear end... and the bed looks to be in better shape than mine! Let me (all of us) know __________________ No matter where you are..... There you are... Buckaroo Banzi

08-06-2003, 05:13 PM	#22
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I can't believe the srap yard won't give you a $ per pound value. Who cares if it is only $42 a ton...,you'd at least get a pack of smokes out of it. If only i was closer, I do see some parts I could use there.

08-06-2003, 06:13 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Scrap is way down around here, the last five trucks I've hauled in $27 tops per truck, it sucks the price being low. They were parted out just about the same as this one. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-06-2003, 07:35 PM	#24
Maximum Overdrive December 21, 2012 Join Date: Apr 2000 Location: Black Eagle, Montana Posts: 1,633	If you cant find a buyer and have to scrap it at least pull some of the basic parts off like those emblems on the fenders.

08-06-2003, 08:53 PM	#25
nejeff Registered User Join Date: Jun 2003 Location: Nebraska Posts: 63	No Max is wouldn't be right to take away it's emblems...it's like it's badges. "badges? We don't need no stinking badges" __________________ 72' Chevy Super Cheyenne LWB 72' Chevy C-10 (307 Parts Truck)

Register or Log In To remove these advertisements.