KS Parting 72 GMC 1/2 ton sierra grande big block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 07-12-2014, 02:26 PM

Well BB stuff is gone
tilt some play in it and shifter pin is whollared a little $250 shipped
tailgate has a little rust on back side and some deep surface rust on outside $100 plus ship
high hump is sold
PS box is sold
sway bar setup $75 shipped
turbo 400 linkage $45 shipped
black seat belts, some fading $55 shipped
chrome wing windows
disc brake frontend $100, no ship
automatic crossmember $45 shipped
steering wheel, few cracks but not real bad
has some of exhaust hangers but not all
leaf spring rearend $100 no ship
glove box door, emblem is loose
sliding rear window
brake booster setup, unknown condition $80 shipped
air conditioning parts
Big block cab heat shield

teeitup · 07-12-2014, 02:34 PM

78

teeitup · 07-12-2014, 02:35 PM

83

teeitup · 07-12-2014, 02:36 PM

88

teeitup · 07-12-2014, 02:36 PM

93

Dirt's72 · 07-12-2014, 03:06 PM

How much for the steering wheel? Dash pad any good?
Foot pedal set?

Dale99 · 07-12-2014, 04:06 PM

Right eye brow, with hardware?

I'm heading to witchita(sp?) next weekend and could get it then if its good.

Dale99 · 07-12-2014, 04:07 PM

oh, and is the bumper good? that too.

teeitup · 07-12-2014, 05:17 PM

Dirts72, I'll get pics of steering wheel and foot pedals. Dash pad is junk.

Dale99, I'll check eyebrow. Front bumper is aftermarket has some surface rust. back bumper is decent, it has a little tweak to it

Thanks Randy

Dale99 · 07-12-2014, 05:35 PM

Quote:

Originally Posted by teeitup

Dale99, I'll check eyebrow. Front bumper is aftermarket has some surface rust. back bumper is decent, it has a little tweak to it

I meant front bumper, sorry. If some rubbing compound will take care of it and you can beat new price. I'll likely take it. Was likely going to get repo anyway.

LMK on eyebrow.

teeitup · 07-12-2014, 06:21 PM

steering wheel has some cracks $40 plus shipping

teeitup · 07-12-2014, 06:22 PM

mo of it

teeitup · 07-12-2014, 06:24 PM

Tom, the studs are broke off back and some light pitting. I have one guy ahead of you on them, he's on another website I'm on. $25 plus shipping on them

mx289 · 07-12-2014, 06:22 PM

Hi Randy.

How are the bedside Sierra Grande emblems?

hillbilly_deluxe · 07-12-2014, 08:00 PM

How does the rear cargo light look
Thanks kyle

**70STOVEBOLT** · 07-12-2014, 10:29 PM

Randy, are both exhaust downpipes still there? If so could you cut them off after the horizontal bend? Also, how much for the exhaust hangers? Shipping to 46562. No hurry.

Thanks,
Mark

teeitup · 07-13-2014, 10:49 AM

Kyle, I'll check it out today

Mark, downpipes were cut by previous owner. I'll get pics of what hangers I have once I get it all parted

Thanks Randy

Vintage Windmills · 07-13-2014, 03:39 PM

Hi Randy, how much for wheel and tilt picked up? I assume its a dana open rear?

teeitup · 07-13-2014, 03:48 PM

Jud, $250 for tilt and steering wheel picked up. Its a 12 bolt open rear. Thanks Randy

teeitup · 07-13-2014, 11:11 PM

Keith, I will get quote Mon after work

Kyle, I'll send info

Dirts72, I'll send info

j.blakeslee, I think its sold, I had to get a guy a shipping quote, I will let you know if he passes

Thanks Randy

teeitup · 07-13-2014, 11:15 PM

High hump sold
PS box sold
rear bumper sold
chrome foot pedals sold
seat belts sold
cargo light sold
All emblems sold
gate sale pending
Thanks Randy

nyncompute · 07-13-2014, 11:39 PM

Ok Randy, I'll take the antenna. Let me know of the final damages.

teeitup · 07-14-2014, 08:06 PM

Frank, I will ship out Tues, Thanks

Bruce, sorry I hauled off the front clip and remains to scrap today

Thanks Randy

teeitup · 07-15-2014, 01:00 PM

Pics of gate

teeitup · 07-15-2014, 01:01 PM

last

07-12-2014, 02:26 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Parting 72 GMC 1/2 ton sierra grande big block Well BB stuff is gone tilt some play in it and shifter pin is whollared a little $250 shipped tailgate has a little rust on back side and some deep surface rust on outside $100 plus ship high hump is sold PS box is sold sway bar setup $75 shipped turbo 400 linkage $45 shipped black seat belts, some fading $55 shipped chrome wing windows disc brake frontend $100, no ship automatic crossmember $45 shipped steering wheel, few cracks but not real bad has some of exhaust hangers but not all leaf spring rearend $100 no ship glove box door, emblem is loose sliding rear window brake booster setup, unknown condition $80 shipped air conditioning parts Big block cab heat shield Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 07-12-2014 at 02:38 PM.

07-12-2014, 02:34 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block 78 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 02:35 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block 83 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 02:36 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block 88 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 02:36 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block 93 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 03:06 PM	#6
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,105	Re: Parting 72 GMC 1/2 ton sierra grande big block How much for the steering wheel? Dash pad any good? Foot pedal set?

07-12-2014, 04:06 PM	#7
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Parting 72 GMC 1/2 ton sierra grande big block Right eye brow, with hardware? I'm heading to witchita(sp?) next weekend and could get it then if its good. __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

07-12-2014, 04:07 PM	#8
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Parting 72 GMC 1/2 ton sierra grande big block oh, and is the bumper good? that too.

07-12-2014, 05:17 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Dirts72, I'll get pics of steering wheel and foot pedals. Dash pad is junk. Dale99, I'll check eyebrow. Front bumper is aftermarket has some surface rust. back bumper is decent, it has a little tweak to it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 06:21 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block steering wheel has some cracks $40 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 06:22 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block mo of it Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 06:24 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Tom, the studs are broke off back and some light pitting. I have one guy ahead of you on them, he's on another website I'm on. $25 plus shipping on them Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2014, 06:22 PM	#14
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: Parting 72 GMC 1/2 ton sierra grande big block Hi Randy. How are the bedside Sierra Grande emblems? __________________ Tom 71 K2500 71 K5 Jimmy

07-12-2014, 08:00 PM	#15
hillbilly_deluxe Registered User Join Date: Dec 2011 Location: pittstown nj Posts: 103	Re: Parting 72 GMC 1/2 ton sierra grande big block How does the rear cargo light look Thanks kyle

07-12-2014, 10:29 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,258	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy, are both exhaust downpipes still there? If so could you cut them off after the horizontal bend? Also, how much for the exhaust hangers? Shipping to 46562. No hurry. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

07-13-2014, 10:49 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Kyle, I'll check it out today Mark, downpipes were cut by previous owner. I'll get pics of what hangers I have once I get it all parted Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2014, 03:39 PM	#18
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 72 GMC 1/2 ton sierra grande big block Hi Randy, how much for wheel and tilt picked up? I assume its a dana open rear? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-13-2014, 03:48 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Jud, $250 for tilt and steering wheel picked up. Its a 12 bolt open rear. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2014, 11:11 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Keith, I will get quote Mon after work Kyle, I'll send info Dirts72, I'll send info j.blakeslee, I think its sold, I had to get a guy a shipping quote, I will let you know if he passes Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2014, 11:15 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block High hump sold PS box sold rear bumper sold chrome foot pedals sold seat belts sold cargo light sold All emblems sold gate sale pending Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2014, 11:39 PM	#22
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Parting 72 GMC 1/2 ton sierra grande big block Ok Randy, I'll take the antenna. Let me know of the final damages. __________________ 1972 K-10 SWB Cheyenne

07-14-2014, 08:06 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Frank, I will ship out Tues, Thanks Bruce, sorry I hauled off the front clip and remains to scrap today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-15-2014, 01:00 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block Pics of gate Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-15-2014, 01:01 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC 1/2 ton sierra grande big block last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.