|
|
|
07-16-2014, 03:52 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
gasket wrinklel
I got my front windshield put in today, I have a few wrinkles in each of the upper corners, other than that it looks good, original trim installed and still in good shape,
and before anybody says anything yes i used a Precision gasket from GMC Pauls, and a original OEM front windshield I cut out of an rotted truck in a field
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks 
|
|
|
|
07-19-2014, 06:50 PM
|
#2 |
|
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: gasket wrinklel
here are a couple of crappy pics of top corners , do not mind the cut out holes in cab(rust removal)
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
|
|
|
|
|
07-19-2014, 08:30 PM
|
#3 |
|
Registered User
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,147
|
Re: gasket wrinklel
I have never seen an after market installation that the gasket did not wrinkle a little. It's all good.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 |
|
|
|
|
07-19-2014, 08:42 PM
|
#4 |
|
Registered User
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: gasket wrinklel
Mine is aftermarket now, and did the same thing...same spots
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son 
|
|
|
|
|
07-19-2014, 09:39 PM
|
#5 |
|
Registered User
Join Date: Mar 2005
Location: Bartlett, TN (near Memphis)
Posts: 202
|
Re: gasket wrinklel
mine looks like that...it leaks when I drive in the rain
|
|
|
|
|
07-20-2014, 08:37 AM
|
#6 | |
|
Registered User
Join Date: Jun 2011
Location: Osceola, Ia
Posts: 2,017
|
Re: gasket wrinklel
Quote:
 good luck
__________________
Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold  71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039 |
|
|
|
|
|
07-20-2014, 12:05 AM
|
#7 |
|
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Re: gasket wrinklel
Im curious as to why you didnt go ahead and weld in patch pieces for the area above the windshield before the ws install. Will you have to pull the ws to weld the pieces in?
|
|
|
|
|
07-20-2014, 03:17 PM
|
#8 | |
|
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: gasket wrinklel
Quote:
sometimes i realize that i am doing somethings backwards, but when you drive your truck most of the days of the week, I do what i can when i can do it, Plus the old W/S was cracked and leaking bad at the bottom R corner
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
|
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
