parting out a 72 let me know what you need - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckman32 · 08-06-2003, 04:31 PM

i might be getting a 72 1/2 ton two wheel drive long bed truck all i want is the front crossmember&rearend for my 66 c10 truck. it has no engine or tranny or winshield but, the cab is in fair shape with title the rear glass is the full window not the slider looks like there might be alot of good parts for all you 67-72 owners,just let me know what you need and we can talk about a price.or if anybody wants to buy the truck minus the parts i need, that will work also but, i would like to part it out to help everybody out on some parts they may need i will even trade parts for parts for my trucks listed below

**Ironhorse** · 08-06-2003, 05:33 PM

Any chrome front bumper guards to be had from this 72? Looking for a nice pair of original GM. Is it standard or auto trans ?

08-06-2003, 06:06 PM

pm sent

mtdave2 · 08-06-2003, 10:56 PM

still need a painted gas cap

Mike Culpepper · 08-08-2003, 01:29 PM

I could use a cigarette lighter. I only need the knob part (the part that is removed from the dash to light up).
Mike

**old Rusty C10** · 08-08-2003, 01:59 PM

hows the bed?

wnc mountain · 08-08-2003, 02:50 PM

how's the rear bumper and brackets, is it chrome, step or what?
Got pics?

truckman32 · 08-08-2003, 04:34 PM

i will get back with everybody that replied to my thread in a couple days i need to get down to were the truck is so i can see what parts are usefull since it's not here at the house yet i will have to store it until i have room. that's the reason i asked if anybody needed some parts hoping i could sell as much parts as i could because after i get my stuff i need i will send her to the crusher since i haven't got any room to store it so, i will go look for the parts eveybody asked about and post it

jts · 08-08-2003, 07:39 PM

Also interested in the bed, let me know please.

cnshoot · 08-09-2003, 12:33 AM

could i see some pics of the truck there are lots of things i might be interested in and every month i go to henderson ky.

munkjeep · 08-09-2003, 05:47 AM

Hey truckman, If the cab is solid and has a Ky title, I would be insterested in it, or all the remains. I live in Nicholas Co, not too far away.

munkjeep · 08-09-2003, 05:55 AM

Hey truckman, or I got a buddy that runs a country junkyard in Nicholas Co, might be cheaper for you to buy what you need from him. I have gave him a couple of 67 to 72 trucks in the past, that went to the crusher with out the 1st part sold off of them. Not a big demand for rear ends or front crossmembers.

truckman32 · 08-09-2003, 12:04 PM

munkjeep,i don't know much about a 72 model truck but, the one i can get has the 12 bolt rearend and, the other reason i was interested in it is to help out on some parts for everybody else too. there are way to many of these trucks going to the crusher if this happens all the time then parts are going to get impossible to find,how much for a 5 lug disc front crossmember and a 12bolt rearend

Lowerd1 · 08-09-2003, 05:19 PM

What color is the 1972? Reason is my father sold a 1972 Chevy long bed a few years ago and I always wandered where it went to. I see you are in Kentucky so with it being sold in Tennessee I took a shot to see if maybe it was it.

cwilli84 · 08-09-2003, 07:30 PM

Does it have disc brakes?

jay6891 · 08-09-2003, 11:35 PM

Hows the outer grill look? Price? I used to live in Mt Sterling. My sister graduated from there. Her ex husband family lives there also. Shoot me price on grill if any good.

truckman32 · 08-10-2003, 09:40 AM

well bad news they sold the truck on me.oh well if another truck comes along with good parts i will post again does anyone know what a good 72 1/2 ton 5x5 12 bolt rearend is worth$$$

cwilli84 · 08-10-2003, 10:07 AM

Bummer dude!

truckman32 · 08-10-2003, 11:22 AM

another deal is out there,i really wanted the 12 bolt r/e though . i might just get my front crossmember from a 81 c10 from the boneyard but, i haven't called for a price yet ?

08-06-2003, 04:31 PM	#1
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	parting out a 72 let me know what you need i might be getting a 72 1/2 ton two wheel drive long bed truck all i want is the front crossmember&rearend for my 66 c10 truck. it has no engine or tranny or winshield but, the cab is in fair shape with title the rear glass is the full window not the slider looks like there might be alot of good parts for all you 67-72 owners,just let me know what you need and we can talk about a price.or if anybody wants to buy the truck minus the parts i need, that will work also but, i would like to part it out to help everybody out on some parts they may need i will even trade parts for parts for my trucks listed below __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

08-06-2003, 05:33 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Any chrome front bumper guards to be had from this 72? Looking for a nice pair of original GM. Is it standard or auto trans ? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-06-2003, 10:56 PM	#4
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	still need a painted gas cap __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

08-08-2003, 01:29 PM	#5
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	I could use a cigarette lighter. I only need the knob part (the part that is removed from the dash to light up). Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

08-08-2003, 01:59 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	hows the bed? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-08-2003, 02:50 PM	#7
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	how's the rear bumper and brackets, is it chrome, step or what? Got pics? __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

08-08-2003, 04:34 PM	#8
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	i will get back with everybody that replied to my thread in a couple days i need to get down to were the truck is so i can see what parts are usefull since it's not here at the house yet i will have to store it until i have room. that's the reason i asked if anybody needed some parts hoping i could sell as much parts as i could because after i get my stuff i need i will send her to the crusher since i haven't got any room to store it so, i will go look for the parts eveybody asked about and post it __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

08-08-2003, 07:39 PM	#9
jts Registered User Join Date: Jan 2003 Location: Sw Florida Posts: 4	Also interested in the bed, let me know please.

08-09-2003, 12:33 AM	#10
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	could i see some pics of the truck there are lots of things i might be interested in and every month i go to henderson ky. __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

08-09-2003, 05:47 AM	#11
munkjeep Registered User Join Date: Aug 2002 Location: Kentucky Posts: 13	Hey truckman, If the cab is solid and has a Ky title, I would be insterested in it, or all the remains. I live in Nicholas Co, not too far away.

08-09-2003, 05:55 AM	#12
munkjeep Registered User Join Date: Aug 2002 Location: Kentucky Posts: 13	Hey truckman, or I got a buddy that runs a country junkyard in Nicholas Co, might be cheaper for you to buy what you need from him. I have gave him a couple of 67 to 72 trucks in the past, that went to the crusher with out the 1st part sold off of them. Not a big demand for rear ends or front crossmembers.

08-09-2003, 12:04 PM	#13
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	munkjeep,i don't know much about a 72 model truck but, the one i can get has the 12 bolt rearend and, the other reason i was interested in it is to help out on some parts for everybody else too. there are way to many of these trucks going to the crusher if this happens all the time then parts are going to get impossible to find,how much for a 5 lug disc front crossmember and a 12bolt rearend __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

08-09-2003, 05:19 PM	#14
Lowerd1 Full Time Loser! Join Date: Feb 2003 Location: Murfreesboro Tennessee Posts: 65	What color is the 1972? Reason is my father sold a 1972 Chevy long bed a few years ago and I always wandered where it went to. I see you are in Kentucky so with it being sold in Tennessee I took a shot to see if maybe it was it. __________________ 1979 C10 - Its being rebuilt. 1978 Silverado - Its being driven. 1995 Grand Prix GTP - Its stock

08-09-2003, 07:30 PM	#15
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Does it have disc brakes?

08-09-2003, 11:35 PM	#16
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Hows the outer grill look? Price? I used to live in Mt Sterling. My sister graduated from there. Her ex husband family lives there also. Shoot me price on grill if any good. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.



Register or Log In To remove these advertisements.

08-06-2003, 06:06 PM	#3
Linus0014 Guest Posts: n/a	pm sent

08-10-2003, 09:40 AM	#17
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	well bad news they sold the truck on me.oh well if another truck comes along with good parts i will post again does anyone know what a good 72 1/2 ton 5x5 12 bolt rearend is worth$$$ __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

08-10-2003, 10:07 AM	#18
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Bummer dude!

08-10-2003, 11:22 AM	#19
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	another deal is out there,i really wanted the 12 bolt r/e though . i might just get my front crossmember from a 81 c10 from the boneyard but, i haven't called for a price yet ? __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

Register or Log In To remove these advertisements.