|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-13-2014, 12:53 PM
|
#1 |
|
Registered User
Join Date: Feb 2012
Location: Calgary, Alberta
Posts: 135
|
Interior/Wiring Install Steps on Paint only Cab
Hi Guys,
Got my cab back from paint and it's sitting on the frame now. I'm trying to figure out the best order in which to install stuff back into and onto the cab. I figured cab mounts (Duh!) and i've got the dash pad on, but now what? I've got an American Autowire Harness to install as well as an Old Air Products A/C system for a Factory A/C cab. The rest is pretty much stock. It's going from bare paint (firewall too) on up. Suggestions? |
|
|
|
08-13-2014, 01:05 PM
|
#2 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: Interior/Wiring Install Steps on Paint only Cab
You need to install the firewall insolation pads next. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
08-13-2014, 01:11 PM
|
#3 |
|
Project Junkie! Fishing Poor!!
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: Interior/Wiring Install Steps on Paint only Cab
Then you can move on to ebrake assembly, then wiper motor / windshield washer assembly, then steering column, horn relay, and radio. Then start wiring installing switches and controls as you go. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
08-13-2014, 03:56 PM
|
#4 |
|
Registered User
Join Date: Feb 2012
Location: Calgary, Alberta
Posts: 135
|
Re: Interior/Wiring Install Steps on Paint only Cab
Thanks Wes, much appreciated!
|
|
|
|
|
09-03-2014, 06:26 PM
|
#5 |
|
Project Junkie! Fishing Poor!!
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: Interior/Wiring Install Steps on Paint only Cab
Your welcome. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
09-03-2014, 06:38 PM
|
#6 |
|
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: Interior/Wiring Install Steps on Paint only Cab
Here were the dis assembly steps I used. I went in order of whatever could be most easily accessed at that point in time. So, reversing these steps should get you close.
Sorry about "remove plastic thing from column hole" and a few ambiguous things where I didn't know the correct name... Remove door handle Remove chrome strip from inside of door Remove Custom Camper emblems from doors Remove cowl to cab seals Remove door with hinges still attached to doors Remove door strikers - count shims Remove seats Remove console Remove sill plates Remove 2 under-column brackets Remove 1 under-column strap Disconnect wiring harnesses from column Disconnect column to firewall screws Remove column - put in gear needed to align with hole Remove carpet Remove carpet underlay Disconnect speedo cable from instrument cluster Disconnect oil pressure line from gauge Disconnect vacuum gauge line Disconnect tach harness Remove instrument cluster Remove headlight switch Remove wiper swith Remove glovebox door Remove glovebox latch Remove glovebox liner Remove radio Remove AC side vents and pipes Remove headliner Remove visors Remove dome lamp Remove cargo lamp and switch Remove fuel tank Remove dome lamp/fuel sender harness Remove foam insulation from B-pillar Remove seat belts Disconnect harness from heater box relay Disconnect harness and remove grommet from heater resistor Remove heater box inside cab Remove antenna base and grommet Remove weatherstripping from door entries Disconnect brake switch Remove pedal box assembly Remove door pins and floor dimmer Disconnect ignition connectors Disconnect wiper connectors Pull engine harness back through firewall Remove relay by fusebox Disconnect orange-white courtesy harness from fusebox Remove fusebox Disconnect cable from e-brake assembly Remove e-brake assembly Remove passenger floor vent and solenoid Remove driver floor vent and pull-handle Remove wiper motor Remove accelerator rod bell crank Remove plastic thing by column hole Remove firewall padding Remove jute from dash Remove dash pad Remove AC center vent Remove speaker Remove accelerator pedal mount studs Disconnect e-brake and speed Remove oil gauge line and grommet Remove brake pedal firewall boot
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
