MO serpentine setup with pulleys and accessories $160.00 shipped

[sduckworth13]

I have a serpentine setup from a 90? Chevy truck. All the accessories ( alt, power steering, a/c compressor, harmonic balancer w crank shaft pulley ) included. I also believe I have all the bolts too. This setup doesn't have a smog pump provision. Will need cleaned up, it's pretty dirty $160.00 shipped

I'll get pictures of the setup tonight after work.

Thanks,
Scott Duckworth
913-314-6233

[70cst]

Bump

[sduckworth13]

Thank you I'll get pictures tonight.

[jeh]

That's a good buy for somebody!!!!

[sduckworth13]

Originally Posted by jeh

That's a good buy for somebody!!!!

Thanks jason

[sduckworth13]

Here is a picture of the serpentine setup

[SunSoaked]

Bump for a great deal.
I did this conversion and can tell you this is a good deal.

[DD1]

Will this fit a Chevy 350 engine? And do you have any pics from when it was on the engine (it would help me visualize it)?

[SunSoaked]

Yep

[SunSoaked]

You will need the correct "reverse rotation" water pump.

[sduckworth13]

Originally Posted by SunSoaked

Bump for a great deal.
I did this conversion and can tell you this is a good deal.

Thank you

Originally Posted by DD1

Will this fit a Chevy 350 engine? And do you have any pics from when it was on the engine (it would help me visualize it)?

I don't have any pictures of everything installed. I bought this from a friend of mine for $100.00 and he just have me everything for it in a bucket.

[DD1]

Originally Posted by sduckworth13

Thank you

I don't have any pictures of everything installed. I bought this from a friend of mine for $100.00 and he just have me everything for it in a bucket.

Thanks! I have to think about this. I would love to do the upgrade, but I need to be careful about making an impulsive purchase. My wife's job is closing at the end of Sept, so this would be a tough time for me to spend close to $300 (with the water pump).

If someone else wants it in the meantime, go ahead and sell it. That will make my decision easier. :-)

[sduckworth13]

Originally Posted by DD1

Thanks! I have to think about this. I would love to do the upgrade, but I need to be careful about making an impulsive purchase. My wife's job is closing at the end of Sept, so this would be a tough time for me to spend close to $300 (with the water pump).

If someone else wants it in the meantime, go ahead and sell it. That will make my decision easier. :-)

How about 110.00 shipped. I'm not going to use it.

[DD1]

Originally Posted by sduckworth13

How about 110.00 shipped. I'm not going to use it.

That is probably an offer I can't refuse... The wife might kill me, but let's do this. It comes with all brackets, right (I don't see the a/c compressor in the pic, so I have to ask)? I need something I can basically bolt into my engine.

Thanks for the price break; I really appreciate it. You have helped me and made my things more difficult at the same time!

[DD1]

One more question, do you know what exactly what type of truck this came off? Or what type of belt it uses? I need to know how to search for the belt for it.

[sduckworth13]

Originally Posted by DD1

That is probably an offer I can't refuse... The wife might kill me, but let's do this. It comes with all brackets, right (I don't see the a/c compressor in the pic, so I have to ask)? I need something I can basically bolt into my engine.

Thanks for the price break; I really appreciate it. You have helped me and made my things more difficult at the same time!

no problem. Glad to help. The serpentine setup will come with the pulleys, brackets, braces, and nuts and bolts.

Originally Posted by DD1

One more question, do you know what exactly what type of truck this came off? Or what type of belt it uses? I need to know how to search for the belt for it.

I'm not sure on the part number but just ask for the belt that doesn't have the smog pump. I believe this came off a 94? 4.3 not real sure. There are part numbers on the casting to help you get the right belt. It will fit a 1995 C1500 5.3 and many others.

[DD1]

Originally Posted by sduckworth13

no problem. Glad to help. The serpentine setup will come with the pulleys, brackets, braces, and nuts and bolts.



I'm not sure on the part number but just ask for the belt that doesn't have the smog pump. I believe this came off a 94? 4.3 not real sure. There are part numbers on the casting to help you get the right belt. It will fit a 1995 C1500 5.3 and many others.

Paypal good? PM me your info.

[sduckworth13]

Do you know what heads you have, I know that some heads don't have a bolt hole for one bolt that attaches to the serpentine assembly, but a lot of people still use them without issue without that bolt.

[DD1]

Originally Posted by sduckworth13

Do you know what heads you have, I know that some heads don't have a bolt hole for one bolt that attaches to the serpentine assembly, but a lot of people still use them without issue without that bolt.

I believe I have stock heads... that's all I can tell you. The engine came out of a 1983 Chevy C20. Here are some pics if it helps identify them. The first two is right after it was rebuilt. The next two are with most accessories installed.

Of course I realized after uploading that the first pic shows the wrong side of the engine!

Thanks for your help with this.

[sduckworth13]

PM sent

[sduckworth13]

Here is the A/C compressor. It is attached to the serpentine assembly and it will attach on the right side of the engine.

[DD1]

Originally Posted by sduckworth13

Here is the A/C compressor. It is attached to the serpentine assembly and it will attach on the right side of the engine.

Oh, okay. I am really not familiar with belt driven systems, so I did not know what I was looking at. Thanks!

[sduckworth13]

This should work out fine, I think it was some early vortecs that didn't have the accessory hole in the front of the head.

[sduckworth13]

That's a good looking engine you have. I'm getting ready to rebuild mine so I'm trying to clear out some space in the garage so when Vic ( Vic1947 ) comes over he has room to work.

[DD1]

Originally Posted by sduckworth13

That's a good looking engine you have. I'm getting ready to rebuild mine so I'm trying to clear out some space in the garage so when Vic ( Vic1947 ) comes over he has room to work.

Thanks! I sent it out to be rebuilt, and my wife painted it after we got it back. Of course, for the money I spent on the engine itself and the cost to rebuild, I probably could have bought a LS engine. But I learned that too late.

Do you know if the drivebelt system would take a long or short water pump? If not, I can figure it out when I get it.