WTB- 6 cylinder stuff in N Texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 08-09-2003, 07:52 AM

I decided to keep the 6 cylinder for now. I'm looking for either a good running 6 cylinder or a good core for a rebuild. Any parts are welcome too. Either 250 or 292 would be fine.

What do you have laying around?

MOTHERTRUCKERS · 08-09-2003, 09:10 AM

Shame your not in Fl, I have 250 and 292 stock and performance parts out the wazoo, even a few rare 63 292 forged steel cranks.

matt67350 · 08-09-2003, 11:45 AM

I have a 250 in Weatherford $200.00
Runs good and does not smoke.

Tx Firefighter · 08-09-2003, 04:59 PM

Matt, you have a PM from me

Kevin

SCOTI · 08-09-2003, 06:08 PM

I've got some headers if your going that route.

**jerry moss** · 08-09-2003, 09:04 PM

i've got an original 6cyl fan shroud, 20 plus mail

**67sss** · 08-11-2003, 12:40 AM

SCOTTI...............I'm interested in the headers, you have PM

08-09-2003, 07:52 AM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	WTB- 6 cylinder stuff in N Texas I decided to keep the 6 cylinder for now. I'm looking for either a good running 6 cylinder or a good core for a rebuild. Any parts are welcome too. Either 250 or 292 would be fine. What do you have laying around? __________________ I'm on the Instagram- @Gearhead_Kevin

08-09-2003, 09:10 AM	#2
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Shame your not in Fl, I have 250 and 292 stock and performance parts out the wazoo, even a few rare 63 292 forged steel cranks. __________________ Rest in Peace Ed. Thanks for all the good times.

08-09-2003, 11:45 AM	#3
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have a 250 in Weatherford $200.00 Runs good and does not smoke. __________________ 69 swb stepside, rebuild and upgrade in progress

08-09-2003, 04:59 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Matt, you have a PM from me Kevin __________________ I'm on the Instagram- @Gearhead_Kevin

08-09-2003, 06:08 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	I've got some headers if your going that route. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-09-2003, 09:04 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	i've got an original 6cyl fan shroud, 20 plus mail __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-11-2003, 12:40 AM	#7
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	SCOTTI...............I'm interested in the headers, you have PM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.