|
|
|
09-07-2014, 08:50 AM
|
#1 |
|
Registered User
Join Date: Feb 2012
Location: Wisconsin
Posts: 144
|
Hobart 125
I have a brand new Hobart 125 and a regulator from Northern Tool. I can't figure out how to connect the two. The regulator has 5/8-18RH female threads for the outlet and I don't know what kind of male fitting I need to go into the back of the welder.
|
|
|
|
09-08-2014, 12:28 PM
|
#2 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Hobart 125
you will need 3/8'' npt (national pipe thread) fittings
both 1/4 and 3/8 npt are 18 threads per inch but 3/8 npt is close to 5/8'' use pipe dope not teflon tape on those threads teflon tape can send little strands of tape into solenoid valves and cause problems
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
09-08-2014, 01:23 PM
|
#3 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Hobart 125
If you look inside that fitting you will see a tapered seat. Same on the back of the welder. When you buy the correct hose for a mig welder it will have the right fittings on the ends. It is not a pipe thread!
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
09-09-2014, 10:10 PM
|
#4 |
|
Senior Member
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
|
Re: Hobart 125
This page has a picture of what the hose looks like. It shows a fixed regulator, but yours would connect in exactly the same way.
https://www.hobartwelders.com/pdf/sp...andler_125.pdf |
|
|
|
|
09-10-2014, 11:34 PM
|
#5 |
|
Registered User
Join Date: Feb 2012
Location: Wisconsin
Posts: 144
|
Re: Hobart 125
got this from amazon for $15.00
|
|
|
|
|
09-11-2014, 01:44 PM
|
#6 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Hobart 125
sorry there, had a brainfart, been working on hooking up air to a new plasma cutter
__________________
cool, an ogre smiley Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
