KS 3 Original "Style" Jacks F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-01-2014, 06:56 PM

Not sure these jacks are original to the 67-72 trucks but are all very similar in that style. Not restored, just solvent washed, oiled and tested for operation. All three lifted my '71 4x4 1/2 ton running 31/10.50/15's on 15x8 rallies on cement floor. The two smaller jacks lifted the tire 3'' off the floor and the larger jack lifted 5'' off the floor.

The two smaller jacks measure 7 1/4'' retracted vrs. 15 3/4'' extended. Only have the one folding jack handle for these two jacks. Handle mearures 49'' long open w/9'' angled handle, 29'' folded in. First jack buyer gets the handle, second jack buyer gets jack only. $50 shipped for the single jack, $65 shipped for jack with handle. One jack has an " A " stamped on the base, nothing on the other jack base ??

Larger jack on left is 8'' retracted vrs. 17 3/4'' extended. Handle for it measures 46'' open with 9'' angled handle, 29'' folded in. This jack is physically a bit larger than the other two. For 3/4 or 1 ton maybe, not sure and not saying so. Has an " A " stamped on the base ?? $75 shipped for this jack, heavier with more shippng costs.

Can do more pics if needed. Money order or $$ only, do not have Paypal.

LostMy65 · 10-01-2014, 10:54 PM

I'll take the best of the two smaller Jacks along with the handle.

LostMy65 · 10-02-2014, 12:39 AM

Oops, Actually I'll pass.

hounddogs! · 10-02-2014, 11:29 AM

I'll take the better of the small jacks along with the handle. PM me your info for MO/check.

**JJorgensen52** · 10-02-2014, 11:41 AM

Large jack looks like a square body (73-87) unit, they mounted under the hood on the driver's inner fender.

**Ironhorse** · 10-02-2014, 12:53 PM

One small jack and handle SOLD to hounddogs! PM with payment info to follow, thanks for the purchase.

One small jack ONLY and the large jack w/handle still available.

The large jack is simialr to the square bodied, I had an 82, 88, & 91 4x4 Suburban but the jack in each of those had a ''dropped" and "curved" lip to the saddle. This jack is only curved at both ends of the saddle. ??

**Ironhorse** · 10-04-2014, 09:22 AM

Saturday morning bump. Large jack with handle and one small jack without handle still available. Money order or $$, do not have Paypal account.

**gmc 2500 4x4** · 10-15-2024, 03:18 PM

Old thread but I see u have a large jack like I have and just looking for info

**Ironhorse** · 10-15-2024, 08:43 PM

Sorry but never did come up with any solid information about the different jacks. Maybe different vendors supplying to GM across the country? As I mentioned earlier in the thread, having owned 3 square body Suburbans each jack had a curved lip to capture the bumper edge when jacking.

**gmc 2500 4x4** · 10-15-2024, 08:55 PM

And this one does not sit flat either..u can see the bottom

10-01-2014, 06:56 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	3 Original "Style" Jacks F/S Not sure these jacks are original to the 67-72 trucks but are all very similar in that style. Not restored, just solvent washed, oiled and tested for operation. All three lifted my '71 4x4 1/2 ton running 31/10.50/15's on 15x8 rallies on cement floor. The two smaller jacks lifted the tire 3'' off the floor and the larger jack lifted 5'' off the floor. The two smaller jacks measure 7 1/4'' retracted vrs. 15 3/4'' extended. Only have the one folding jack handle for these two jacks. Handle mearures 49'' long open w/9'' angled handle, 29'' folded in. First jack buyer gets the handle, second jack buyer gets jack only. $50 shipped for the single jack, $65 shipped for jack with handle. One jack has an " A " stamped on the base, nothing on the other jack base ?? Larger jack on left is 8'' retracted vrs. 17 3/4'' extended. Handle for it measures 46'' open with 9'' angled handle, 29'' folded in. This jack is physically a bit larger than the other two. For 3/4 or 1 ton maybe, not sure and not saying so. Has an " A " stamped on the base ?? $75 shipped for this jack, heavier with more shippng costs. Can do more pics if needed. Money order or $$ only, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 10-01-2014 at 07:03 PM.

10-01-2014, 10:54 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 3 Original "Style" Jacks F/S I'll take the best of the two smaller Jacks along with the handle. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-02-2014, 12:39 AM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 3 Original "Style" Jacks F/S Oops, Actually I'll pass. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-02-2014, 11:29 AM	#4
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 887	Re: 3 Original "Style" Jacks F/S I'll take the better of the small jacks along with the handle. PM me your info for MO/check. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-02-2014, 11:41 AM	#5
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: 3 Original "Style" Jacks F/S Large jack looks like a square body (73-87) unit, they mounted under the hood on the driver's inner fender. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

10-02-2014, 12:53 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S One small jack and handle SOLD to hounddogs! PM with payment info to follow, thanks for the purchase. One small jack ONLY and the large jack w/handle still available. The large jack is simialr to the square bodied, I had an 82, 88, & 91 4x4 Suburban but the jack in each of those had a ''dropped" and "curved" lip to the saddle. This jack is only curved at both ends of the saddle. ?? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-04-2014, 09:22 AM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S Saturday morning bump. Large jack with handle and one small jack without handle still available. Money order or $$, do not have Paypal account. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-15-2024, 03:18 PM	#8
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: 3 Original "Style" Jacks F/S Old thread but I see u have a large jack like I have and just looking for info Attached Images

10-15-2024, 08:43 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: 3 Original "Style" Jacks F/S Sorry but never did come up with any solid information about the different jacks. Maybe different vendors supplying to GM across the country? As I mentioned earlier in the thread, having owned 3 square body Suburbans each jack had a curved lip to capture the bumper edge when jacking. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-15-2024, 08:55 PM	#10
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: 3 Original "Style" Jacks F/S And this one does not sit flat either..u can see the bottom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.