Bolting 4 link up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 08-15-2003, 10:48 PM

Starting to put 4 link together. Need to get some parts tommorow to finish mock up. I am going to get it all together then pull it apart and powder.

phantom dually · 08-15-2003, 10:50 PM

pic

phantom dually · 08-15-2003, 10:53 PM

more pics

PrimeredThunder · 08-17-2003, 03:22 AM

Is that a bolt-on setup? if so where did you get it? Also what about bag mounts etc? Looks intresting, I'd liek a 4-link for my 72' someday

phantom dually · 08-17-2003, 10:34 AM

Itis a one off bolt on set up made for me by Bill Turner in California. I already had my bag mounts welded to the frame and rear end so He made this for me. You can buy a bolt on piece from him that takes a little minor cutting to get it to fit. His # is 909-926-1729. Tell him James from KY sent you.

BaggedC10 · 08-17-2003, 11:26 PM

Looks awesome!

VTKidder · 08-18-2003, 10:19 AM

Boy....I've seen some rear ends in my day

, but that takes the cake. Well done.

phantom dually · 08-18-2003, 03:59 PM

Ive had this thing apart more times than I care to talk about. It will hopefully stay this way. Thanks for the congrats!! Im proud!!

68LSS1 · 08-19-2003, 04:43 AM

What color is the frame? I'm getting close to painting my frame and was looking at silver shades. I like it.

phantom dually · 08-19-2003, 06:52 PM

Im not sure on the color. It is a powder coat silver w/ a clear. I just looked thru some samples they had and said I'll take that one!!

*Randy70C-10* · 08-25-2003, 12:21 PM

That's a clean looking setup!

phantom dually · 08-25-2003, 05:54 PM

Thanks!!

Iron-Butt · 09-01-2003, 12:43 PM

Nice job!

Truckhead · 09-01-2003, 06:12 PM

Nice work on your chassis, real professional look. Hope mine looks like that someday.

phantom dually · 09-01-2003, 06:59 PM

Im sure you will get there. It is real hard to stay focused on a project of this length. It seems that I spend a day working on it and then a week waiting for something I need. I will get there one day too. I guess that is why they call this a PROJECT!! Thanks for the compliments!

**N2TRUX** · 09-01-2003, 11:00 PM

Phantom, you are doing better than most with your progress. The old one step forward, two step back shuffle is part of the dance.

At least you are getting something done. My Blazer has been "in progress" for a few years now. I don't mean getting started either. Someday....

phantom dually · 09-02-2003, 05:22 PM

The Blaze looks sweet man how about some more pics!! I got the front a arms mounted on and now I have the prob with the sleeves for the front lower arms. I will have to wait AGAIN for the ones I need!

SCOTI · 09-02-2003, 10:16 PM

What's the problem w/the sleeves?

phantom dually · 09-02-2003, 10:19 PM

For some odd reason the bolts supplied do not fit in the sleeves. Bill Turner said he is shipping the correct ones out ASAP. This was a mistake as they were not supposed to be shipped to me?? JUST my LUCK!!!

phantom dually · 09-02-2003, 10:20 PM

BTW the bolts are the corrects ones. It is the sleeves that are not drilled out enough.

08-15-2003, 10:48 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Bolting 4 link up Starting to put 4 link together. Need to get some parts tommorow to finish mock up. I am going to get it all together then pull it apart and powder. Attached Images

08-15-2003, 10:50 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic Attached Images

08-15-2003, 10:53 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	more pics Attached Images

08-17-2003, 03:22 AM	#4
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Is that a bolt-on setup? if so where did you get it? Also what about bag mounts etc? Looks intresting, I'd liek a 4-link for my 72' someday __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-17-2003, 10:34 AM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Itis a one off bolt on set up made for me by Bill Turner in California. I already had my bag mounts welded to the frame and rear end so He made this for me. You can buy a bolt on piece from him that takes a little minor cutting to get it to fit. His # is 909-926-1729. Tell him James from KY sent you. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-17-2003, 11:26 PM	#6
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Looks awesome! __________________ 2001 Silverado bagged on 22's. Sold

08-18-2003, 10:19 AM	#7
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	Boy....I've seen some rear ends in my day, but that takes the cake. Well done.

08-18-2003, 03:59 PM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Ive had this thing apart more times than I care to talk about. It will hopefully stay this way. Thanks for the congrats!! Im proud!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-19-2003, 04:43 AM	#9
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	What color is the frame? I'm getting close to painting my frame and was looking at silver shades. I like it. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

08-19-2003, 06:52 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Im not sure on the color. It is a powder coat silver w/ a clear. I just looked thru some samples they had and said I'll take that one!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-25-2003, 12:21 PM	#11
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's a clean looking setup!

08-25-2003, 05:54 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-01-2003, 12:43 PM	#13
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Nice job! __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

09-01-2003, 06:12 PM	#14
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	Nice work on your chassis, real professional look. Hope mine looks like that someday.

09-01-2003, 06:59 PM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Im sure you will get there. It is real hard to stay focused on a project of this length. It seems that I spend a day working on it and then a week waiting for something I need. I will get there one day too. I guess that is why they call this a PROJECT!! Thanks for the compliments! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

09-01-2003, 11:00 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Phantom, you are doing better than most with your progress. The old one step forward, two step back shuffle is part of the dance. At least you are getting something done. My Blazer has been "in progress" for a few years now. I don't mean getting started either. Someday.... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-02-2003, 05:22 PM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	The Blaze looks sweet man how about some more pics!! I got the front a arms mounted on and now I have the prob with the sleeves for the front lower arms. I will have to wait AGAIN for the ones I need! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-02-2003, 10:16 PM	#18
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	What's the problem w/the sleeves? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-02-2003, 10:19 PM	#19
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	For some odd reason the bolts supplied do not fit in the sleeves. Bill Turner said he is shipping the correct ones out ASAP. This was a mistake as they were not supposed to be shipped to me?? JUST my LUCK!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-02-2003, 10:20 PM	#20
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	BTW the bolts are the corrects ones. It is the sleeves that are not drilled out enough. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Register or Log In To remove these advertisements.