|
|
|
11-11-2014, 11:05 AM
|
#1 |
|
Registered User
Join Date: Feb 2014
Location: Edmonton, Alberta
Posts: 20
|
Does the dash unbolt?
I'm working on a 68c10 and the cab is stripped out, when I look under the dash there is bolts on the sides where it appears to bolt in but it seems to me that it's spot welded along the windshield edge, is this the case?
|
|
|
|
11-11-2014, 11:09 AM
|
#2 |
|
Registered User
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
|
Re: Does the dash unbolt?
You are correct. Spot welds on top, and bolts on sides.
__________________
Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299 |
|
|
|
|
11-11-2014, 01:41 PM
|
#3 |
|
Registered User
Join Date: Apr 2007
Location: Foster Rhode Island
Posts: 1,176
|
Re: Does the dash unbolt?
Do you need to take the dash out or just wondering?
|
|
|
|
|
11-11-2014, 03:03 PM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Does the dash unbolt?
The top of the dash is spot welded around by the windshiewld // but when removing the dash a short cut of sliceing the perforations under the dash pad can b done and when installing new piece it can b spot welded alot easir than removing the spot welds by the windsheild
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
11-11-2014, 03:11 PM
|
#5 |
|
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: Does the dash unbolt?
As above; I'd recommend an angle drill and a proper spot weld cutter that'll help you not to punch through both layers (if you have any intent of drilling it out, that is).
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
|
|
|
|
11-11-2014, 03:21 PM
|
#6 |
|
Registered User
Join Date: Dec 2011
Location: Ottawa, KS
Posts: 337
|
Re: Does the dash unbolt?
There is also some bracing on the sides under the dash that have to be cut free if you cut the dash at the perforations. It's tough to get at that bracing I was able to get it with a sawsall. Then 2 bolts each side and it's out, It'll be something you'll cuss. They make a center patch panel if you're just trying to fix a jacked up radio hole or something, would probably be easier than the whole dash if you don't need to replace it.
|
|
|
|
|
11-11-2014, 08:54 PM
|
#7 |
|
Registered User
Join Date: Feb 2014
Location: Edmonton, Alberta
Posts: 20
|
Re: Does the dash unbolt?
Old chevy guy, I was just curious, gotta cut holes for A/C and paint so I thought it would be easier to be out but not now.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
