MD NV4500 overdrive 5 speed trans and bell housing

[Ozzy2013]

NV4500 for sale 1993 chevy bolt pattern all rebuilt by trans go in Philadelphia Pa.I have a lakewood blow proof bell housing drilled and tapped for the trans .The clutch fork is on the drivers side and has mounts for a hyd slave cyl or you can do manuel .I have a flywheel that goes with it .The tail housing is 13 inches long and uses a 400 turbo yoke with a mainshaft change it can be made 4wd .I was going to use it and went in a different direction.Prefer local pick up but will ship if you make the arrangements ill put it on a pallet i didn't get around to buying a clutch fork but they are no problem to get.Comes with the shifter also. . 1500.00 for everything!Thanks Oz

[Ozzy2013]

Still for sale folks !

[Ozzy2013]

Whole set up for sale 1,200!End of the year sale my loss your gain need to make room .For sale or trade for a good posi rear.

[Ozzy2013]

For sale folks Blowout price of 1,100.00 Or consider truck parts in trade let me know what you have.

[kda2000]

I'm interested, and shipping can be handled, but can you answer a couple of questions: Will this bell housing use the motor mounts on our trucks, or does it need a trans cross member? Does this have a mechanical or electrical speedometer output? Do you have the receipt from the work done by the trans shop? Thanks, Ken

[Ozzy2013]

No it was rebuilt when i bought it and i didn't get you can pull the cover off and see its all new.It has a VSS electronic speedo hook up.I was going to use a converter or a electronic speedometer .The gps speedos are nice also .You could always change the main shaft also.I was going to use a trans cross member this is a Lakewood bell housing and it has bolt holes that look like you could bolt it in our bell housing mounts if you wanted to .Hope all of the info helps .Oz

[kda2000]

Thanks, I'll need to do some more investigation before I can commit. But thanks for the info. --- Ken

[LockDoc]

-
Is the flywheel for a one piece or two piece rear main block.

Thanks,
LockDoc

[68gmcdually]

Here's a bump, I run this transmission in my '68 and love it, I haven't had a speedometer since I built it, what sort of converter box would you recommend? My father was looking at one while at a trade show back in 2009, but unfortunately passed away shortly after his return and I never took it any futher.

[LockDoc]

Originally Posted by 68gmcdually

Here's a bump, I run this transmission in my '68 and love it, I haven't had a speedometer since I built it, what sort of converter box would you recommend? My father was looking at one while at a trade show back in 2009, but unfortunately passed away shortly after his return and I never took it any futher.

Check into the SpeedHut GPS speedometers. I used one in my '67 with an S-10 5 speed and it works really well.

LockDoc

[Ozzy2013]

this set up is sill for sale.

[Ozzy2013]

Thanks lockdock!And thanks gmcdually for the bump i was real sick from December untill just a few weeks ago fighting several infections .And wasn't on the forums much or wouldn't have taken so long to get back with everyone.

[Ozzy2013]

Watching for the payment in the mail will ship when i get it .Have a great holiday weekend.

[Ozzy2013]

Got the payment and talked to my local fastenall and they said to drop it off Tuesday morning due to the holiday .Will do thanks for the sale .Oz

[franken]

I'm curious about the packaging/palletizing and cost to send via Fastenall. Can you provide details? I filled out a form to ask about shipping a transfer case on the Fastenall site and never heard back...

[LockDoc]

Originally Posted by Ozzy2013

Got the payment and talked to my local fastenall and they said to drop it off Tuesday morning due to the holiday .Will do thanks for the sale .Oz

Thanks Oz. If they need my Fastenal shipping contact when you get there give me a call....

Originally Posted by franken

I'm curious about the packaging/palletizing and cost to send via Fastenall. Can you provide details? I filled out a form to ask about shipping a transfer case on the Fastenall site and never heard back...

Did you put "Somewhere" on the shipping form?...j/k..

I called them first, then downloaded the form, filled it out, and Faxed it to them. Had an answer next day. It was $150 for 300 pounds on a 40x48 (standard) pallet, from Maryland to Iowa. Pretty cheap I thought.... It had to be dropped off at the MD store and I have to pick it up at the Iowa store.

LockDoc

[franken]

No, I put my zip in the form, which is the same as the zip of the local store. Now that people have the internet, I didn't realize I had to call.

[LockDoc]

Originally Posted by franken

No, I put my zip in the form, which is the same as the zip of the local store. Now that people have the internet, I didn't realize I had to call.

I don't think you HAVE to call but I always do in that type of situation. I like to get the skinny directly from the horses mouth, so to speak....

LockDoc

[special-K]

My sister's horse used to manage all their shipping for the region

[Ozzy2013]

What do you want me to put on there?Somewhere ?Do you want this old clutch and pressure plate?I mentioned it in the ad so if you want them they are yours i personally would use new ones but that's up to you.Take care and i hope you have a great weekend!They should have all your info there at fasten all Right?

[LockDoc]

Originally Posted by Ozzy2013

What do you want me to put on there?Somewhere ?

Don't pay any attention to that. I was replying to member "frankens" post. Just put my name and address on it... I PM'd it to you.

Do you want this old clutch and pressure plate?I mentioned it in the ad so if you want them they are yours i personally would use new ones but that's up to you.Take care and i hope you have a great weekend!They should have all your info there at fasten all Right?

No, I don't need the clutch and pressure plate. I have a new clutch and pressure plate.... I will call the Elkton store the first thing Tuesday morning and make sure they have my information.

Thanks,
LockDoc

[Ozzy2013]

Originally Posted by LockDoc

Don't pay any attention to that. I was replying to member "frankens" post. Just put my name and address on it... I PM'd it to you.



No, I don't need the clutch and pressure plate. I have a new clutch and pressure plate.... I will call the Elkton store the first thing Tuesday morning and make sure they have my information.

Thanks,
LockDoc

Awesome!Do you have your build on the sight?Id love to check out your dually .

[LockDoc]

Originally Posted by Ozzy2013

Awesome!Do you have your build on the sight?Id love to check out your dually .

No, I won't have the dually home until next Thursday. I will post some pictures then.

LockDoc