Help with porterbuilt rack heim to spindle

[Art delete]

I need help or more info on the heim to spindle connection. There are two misalignment spacers per side and the pics on the instructions are not clear. I drilled out my spindle to 5/8 and the bolt will now pass thru but the question is how to install the funny misalignment spacers. They do not fit inside the spindle. Any suggestions or pics would be very helpful.

[Pro Performance]

The misalignments fit inside the heim. Only the bolt goes through the spindle.

[Art delete]

Thanks for the reply, I talked with Nate and I have the wrong heims. These are 5/8 and I need the 3/4 bore.

[Hart_Rod]

Originally Posted by Art delete

Thanks for the reply, I talked with Nate and I have the wrong heims. These are 5/8 and I need the 3/4 bore.

Why the difference? Are the 3/4 bore for a particular year of spindle?

[Art delete]

The larger bore size is needed so you can use the spacers. The misalignment spacers fit into the 3/4 heim and are needed so that the heim will have freedom to move and not bind up as the suspension moves. You will still you the 5/8 bolt and spindle will have to be drilled out to the recommended 5/8. Hope this helps.