door panels... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 12-25-2014, 03:02 PM

Do all door panels fit 67 - 72?

Mike C · 12-25-2014, 03:24 PM

Through '71. '72 molded door panel is thicker at the point where window crank passes through so the crank spline is longer on a '72.

Possmguts · 12-25-2014, 03:25 PM

Quote:

Originally Posted by Mike C

Through '71. '72 molded door panel is thicker at the point where window crank passes through so the crank spline is longer on a '72.

So in the 67, what can I use that has the molded arm rests?

Mike C · 12-25-2014, 03:33 PM

You should be able to use the the newer arm rests from a 70-71 with no problem. Only way to use a '72 would be to change the window regulator to a '72 setup.

Possmguts · 12-25-2014, 03:39 PM

Quote:

Originally Posted by Mike C

You should be able to use the the newer arm rests from a 70-71 with no problem. Only way to use a '72 would be to change the window regulator to a '72 setup.

Ok, I'll look into it... thanks

67swb72klb · 12-25-2014, 05:28 PM

Quote:

Originally Posted by Mike C

You should be able to use the the newer arm rests from a 70-71 with no problem. Only way to use a '72 would be to change the window regulator to a '72 setup.

yes on plastic door panels the window regulators have longer stems

12-25-2014, 03:02 PM	#1
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	door panels... Do all door panels fit 67 - 72? __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-25-2014, 03:24 PM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Re: door panels... Through '71. '72 molded door panel is thicker at the point where window crank passes through so the crank spline is longer on a '72. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

12-25-2014, 03:33 PM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Re: door panels... You should be able to use the the newer arm rests from a 70-71 with no problem. Only way to use a '72 would be to change the window regulator to a '72 setup. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.