Mixing An 03 With A 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68SSC10 · 01-08-2015, 04:38 AM

Just Purchased An 03 Yukon With A 5.3 And A 4L60 In It. I Want To Put Them In My 68 C/10. It Currently Has A 355/350 In It With A/C, P/S, P/B.....Any Suggestions On What To And What Not To Do?? What's The Easiest And Best Ways Of Making It Go Together??? Any Suggestions And Helpful Comments Are Welcomed........

Mock1 · 01-08-2015, 06:46 AM

I'm interested in seeing this come together. I'm planing on doin the same thing to my 69 shortstep. There is one site I found that has a lot of wiring info, LT1swap.com
This guy breaks down the whole harness from whats hot and whats not. Some of the info is a bit overwhelming though.
Good luck, and hope all goes well.

joeydurango · 01-08-2015, 11:04 AM

There's tons of info on the LSx Swaps section of this board:

67-72chevytrucks.com/vboard/forumdisplay.php?f=206

All the FAQs are covered. Once you're up to speed on the basics, if you have any super-specific questions, ask over there and you'll probably get a knowledgeable answer. What you're doing is a super-common swap, so shouldn't be too many surprises as long as you do your research.

Looks like it will be cool when done. Have fun!

**LockDoc** · 01-08-2015, 12:52 PM

-
I will have it moved to the LSx Swaps Forum.

LockDoc

l92powered77 · 01-08-2015, 05:32 PM

Quote:

Originally Posted by 68SSC10

Just Purchased An 03 Yukon With A 5.3 And A 4L60 In It. I Want To Put Them In My 68 C/10. It Currently Has A 355/350 In It With A/C, P/S, P/B.....Any Suggestions On What To And What Not To Do?? What's The Easiest And Best Ways Of Making It Go Together??? Any Suggestions And Helpful Comments Are Welcomed........

Hey man that should turn into a badass truck with that ls swap.You have dirty dingo motorsports right there off the 60 in mesa.they make brackets and motormounts and ecm mounts and all kinds of stuff they even make custom pieces for you,.This board should give you a general idea of what you want the rest is up to you.i used to live in az and always visit, not enough old schools being worked on! Good luck man. and post alot of pics.Part that yukon out and the swap will pay for it self by way of donor vehicle .seats door panels dashboard headliner other things like doors and body parts will get you paid quick.theres always peopple looking for body parts ,alot of truck be rolling around with mismatched body parts as work trucks.

68SSC10 · 01-08-2015, 10:55 PM

I Guess I Need To Start From The Bottom And Move Up.... I Have Seen A Couple Of Different Motor Mount Set Ups. One Was Basically A Flat Plate With Holes That Accept The Original Motor Mounts, And The Other Needed The Frame Mounts To Be Changed To A Later Model. Other Than "Kits" I Haven't Seen Much About Trans Mounting. Do The Original Trans Mounts Work?? Is The Engine Angle Alright Using The Factory Trans Mount, Or Is An Aftermarket Mount Needed??

**LockDoc** · 01-12-2015, 01:25 AM

Quote:

Originally Posted by 68SSC10

I Guess I Need To Start From The Bottom And Move Up.... I Have Seen A Couple Of Different Motor Mount Set Ups. One Was Basically A Flat Plate With Holes That Accept The Original Motor Mounts, And The Other Needed The Frame Mounts To Be Changed To A Later Model. Other Than "Kits" I Haven't Seen Much About Trans Mounting. Do The Original Trans Mounts Work?? Is The Engine Angle Alright Using The Factory Trans Mount, Or Is An Aftermarket Mount Needed??

I am planning on using an original transmission cross member. I'm just not sure which one yet. I have one for a TH350 and one for a TH400. Whether or not you can use any of the original frame holes depends on where your engine is located front to back, from what I read on here. I don't know about the angle yet.

LockDoc

Marty68 · 01-14-2015, 01:15 PM

following this. i am in the pre planing stage.. with my 68

68SSC10 · 01-17-2015, 09:56 PM

It's Slowly Coming Apart...

franken · 01-18-2015, 12:11 AM

Sort of like taking all the good from the old truck and inserting all the bad from the new...
Why not just buy a volt?

ls1nova71 · 01-18-2015, 01:32 AM

Quote:

Originally Posted by franken

Sort of like taking all the good from the old truck and inserting all the bad from the new...
Why not just buy a volt?

?????

Pretty sure this is considered trolling.....

**70cst** · 01-18-2015, 01:34 AM

Quote:

Originally Posted by franken

Sort of like taking all the good from the old truck and inserting all the bad from the new...
Why not just buy a volt?

Nothing wrong with creativity

68SSC10 · 01-18-2015, 05:41 PM

Quote:

Originally Posted by franken

Sort of like taking all the good from the old truck and inserting all the bad from the new...
Why not just buy a volt?

If Taking A Well Worn 355/350 That Was Built In The Mid 80's Is Taking The Good Out, Then Yes.....

ETsC10 · 01-19-2015, 09:27 AM

Cool upgrade 68SSC10 ... subscribed!

01-08-2015, 04:38 AM	#1
68SSC10 Registered User Join Date: Nov 2007 Location: Glendale, AZ. Posts: 27	Mixing An 03 With A 68 Just Purchased An 03 Yukon With A 5.3 And A 4L60 In It. I Want To Put Them In My 68 C/10. It Currently Has A 355/350 In It With A/C, P/S, P/B.....Any Suggestions On What To And What Not To Do?? What's The Easiest And Best Ways Of Making It Go Together??? Any Suggestions And Helpful Comments Are Welcomed........ Attached Images __________________ I've Reached The Age Where Happy Hour Is A Nap!!

01-08-2015, 06:46 AM	#2
Mock1 Registered User Join Date: Dec 2014 Location: Gray, Ga. Posts: 183	Re: Mixing An 03 With A 68 I'm interested in seeing this come together. I'm planing on doin the same thing to my 69 shortstep. There is one site I found that has a lot of wiring info, LT1swap.com This guy breaks down the whole harness from whats hot and whats not. Some of the info is a bit overwhelming though. Good luck, and hope all goes well.

01-08-2015, 11:04 AM	#3
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: Mixing An 03 With A 68 There's tons of info on the LSx Swaps section of this board: 67-72chevytrucks.com/vboard/forumdisplay.php?f=206 All the FAQs are covered. Once you're up to speed on the basics, if you have any super-specific questions, ask over there and you'll probably get a knowledgeable answer. What you're doing is a super-common swap, so shouldn't be too many surprises as long as you do your research. Looks like it will be cool when done. Have fun! __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

01-08-2015, 12:52 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: Mixing An 03 With A 68 - I will have it moved to the LSx Swaps Forum. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-08-2015, 10:55 PM	#6
68SSC10 Registered User Join Date: Nov 2007 Location: Glendale, AZ. Posts: 27	Re: Mixing An 03 With A 68 I Guess I Need To Start From The Bottom And Move Up.... I Have Seen A Couple Of Different Motor Mount Set Ups. One Was Basically A Flat Plate With Holes That Accept The Original Motor Mounts, And The Other Needed The Frame Mounts To Be Changed To A Later Model. Other Than "Kits" I Haven't Seen Much About Trans Mounting. Do The Original Trans Mounts Work?? Is The Engine Angle Alright Using The Factory Trans Mount, Or Is An Aftermarket Mount Needed?? __________________ I've Reached The Age Where Happy Hour Is A Nap!!

01-14-2015, 01:15 PM	#8
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Mixing An 03 With A 68 following this. i am in the pre planing stage.. with my 68

01-17-2015, 09:56 PM	#9
68SSC10 Registered User Join Date: Nov 2007 Location: Glendale, AZ. Posts: 27	Re: Mixing An 03 With A 68 It's Slowly Coming Apart... Attached Images __________________ I've Reached The Age Where Happy Hour Is A Nap!! Last edited by ETsC10; 01-18-2015 at 02:57 AM. Reason: removing hint of FS

01-18-2015, 12:11 AM	#10
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,122	Re: Mixing An 03 With A 68 Sort of like taking all the good from the old truck and inserting all the bad from the new... Why not just buy a volt?

01-19-2015, 09:27 AM	#14
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Mixing An 03 With A 68 Cool upgrade 68SSC10 ... subscribed! __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.