1962 C10 Custom Cab Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64jmb · 01-20-2015, 09:32 PM

Hello,
I have a few questions about the custom cab interior and the engine for a 1962 C10 pickup. I wanted to know if anyone knew where I can find original material for the 62 custom cab interior with the decorative insert, not for the 1961 or 1963 C10's as they are different. Here is a 1962 picture I found and it is the same material I would need, and also I believe this truck came with a 327. At least it has one in it now I think based on the air cleaner on it and the orange visible paint on the intake. It has been basically owned by the same family since 1962, and I saw on the 62 chevy truck brochure it was available for the bigger truck. Could that be custom ordered for the C10? Let me know. thanks

**dtkarst** · 01-20-2015, 10:06 PM

As far as I knew, the 66 models were the only ones to come out with a factory 327. I could be wrong though..

**aerotruk63** · 01-20-2015, 10:42 PM

I found my original 63 stuff at originalauto.com. Give them a shout. You just never know.

64jmb · 01-21-2015, 12:51 AM

Quote:

Originally Posted by aerotruk63

I found my original 63 stuff at originalauto.com. Give them a shout. You just never know.

Ill check this out I looked about a year ago but was unable to locate the correct pattern. Thanks for letting me know.

64jmb · 01-21-2015, 01:27 AM

I just found this picture on a older post from oem4me. This is the seat material and seat I need.

LVPhotos · 01-21-2015, 12:16 AM

Mine was 283, 327 didn't come out til 1966 according to book. The engine would be green/grey?. Not orange. Would have genarator not alternator.
http://67-72chevytrucks.com/vboard/s...=588074&page=2

64jmb · 01-21-2015, 01:31 AM

Quote:

Originally Posted by LVPhotos

Mine was 283, 327 didn't come out til 1966 according to book. The engine would be green/grey?. Not orange. Would have genarator not alternator.
http://67-72chevytrucks.com/vboard/s...=588074&page=2

It does have a generator, and I think the motor is grey and the intake is orange. Too much dirt to tell yet for sure. The air cleaner looks like the 1962 medium duty truck 327 picture. Could this be special ordered for the C10?

**Captainfab** · 01-21-2015, 01:48 AM

I don't know if a '62 could have been ordered from the factory with a 327, but it certainly could have been dealer installed for the customer.

Vincenthdfan · 01-21-2015, 02:15 AM

My very original, unmolested 62 has a 283 in it with an original generator on it as well.

Vincenthdfan · 01-21-2015, 02:18 AM

My original interior on my 62...well except for the 57 Chevy BelAir clock someone put on the glovebox door back in the day, lol.

64jmb · 01-21-2015, 03:23 PM

Quote:

Originally Posted by Captainfab

I don't know if a '62 could have been ordered from the factory with a 327, but it certainly could have been dealer installed for the customer.

I posted a picture of the 62 C10 engine compartment, let me know what your thoughts are. thanks

LVPhotos · 01-21-2015, 12:19 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=439322

64jmb · 01-21-2015, 12:49 AM

The motor I think is grey and the intake is orange to much dirt on it to see it I need to clean it off first to see but the air cleaner looks like the one in the 62 brochure for the big trucks 327.

64jmb · 01-21-2015, 12:50 AM

Could you special order a 327 for the C10 in 1962?

LVPhotos · 01-21-2015, 12:51 PM

Here's one from BJ Auction

64jmb · 01-21-2015, 02:58 PM

Quote:

Originally Posted by LVPhotos

Here's one from BJ Auction

Very nice truck I believe I saw this truck last year at Barrett Jackson.

**dtkarst** · 01-21-2015, 07:38 PM

My guess is its not a 327, I havent seen an original air cleaner like that on a C10 before. And as far as I know you couldnt get a 327 in any half ton until 66

**60-66** · 01-21-2015, 08:58 PM

Yes, the round oil bath on the left is correct for 62 283. Your engine would have been a 2 barrel though.

01-20-2015, 09:32 PM	#1
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	1962 C10 Custom Cab Question Hello, I have a few questions about the custom cab interior and the engine for a 1962 C10 pickup. I wanted to know if anyone knew where I can find original material for the 62 custom cab interior with the decorative insert, not for the 1961 or 1963 C10's as they are different. Here is a 1962 picture I found and it is the same material I would need, and also I believe this truck came with a 327. At least it has one in it now I think based on the air cleaner on it and the orange visible paint on the intake. It has been basically owned by the same family since 1962, and I saw on the 62 chevy truck brochure it was available for the bigger truck. Could that be custom ordered for the C10? Let me know. thanks Attached Images Last edited by 64jmb; 01-20-2015 at 09:42 PM.

01-20-2015, 10:06 PM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1962 C10 Custom Cab Question As far as I knew, the 66 models were the only ones to come out with a factory 327. I could be wrong though..

01-20-2015, 10:42 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1962 C10 Custom Cab Question I found my original 63 stuff at originalauto.com. Give them a shout. You just never know. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

01-21-2015, 01:27 AM	#5
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	Re: 1962 C10 Custom Cab Question I just found this picture on a older post from oem4me. This is the seat material and seat I need. Attached Images

01-21-2015, 12:16 AM	#6
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1962 C10 Custom Cab Question Mine was 283, 327 didn't come out til 1966 according to book. The engine would be green/grey?. Not orange. Would have genarator not alternator. http://67-72chevytrucks.com/vboard/s...=588074&page=2 __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-21-2015, 01:48 AM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 1962 C10 Custom Cab Question I don't know if a '62 could have been ordered from the factory with a 327, but it certainly could have been dealer installed for the customer. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-21-2015, 02:15 AM	#9
Vincenthdfan Registered User Join Date: Sep 2014 Location: Olympia, Washington Posts: 172	Re: 1962 C10 Custom Cab Question My very original, unmolested 62 has a 283 in it with an original generator on it as well.

01-21-2015, 02:18 AM	#10
Vincenthdfan Registered User Join Date: Sep 2014 Location: Olympia, Washington Posts: 172	Re: 1962 C10 Custom Cab Question My original interior on my 62...well except for the 57 Chevy BelAir clock someone put on the glovebox door back in the day, lol.

01-21-2015, 12:19 AM	#12
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1962 C10 Custom Cab Question http://67-72chevytrucks.com/vboard/s...d.php?t=439322 __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-21-2015, 12:49 AM	#13
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	Re: 1962 C10 Custom Cab Question The motor I think is grey and the intake is orange to much dirt on it to see it I need to clean it off first to see but the air cleaner looks like the one in the 62 brochure for the big trucks 327.

01-21-2015, 12:50 AM	#14
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	Re: 1962 C10 Custom Cab Question Could you special order a 327 for the C10 in 1962?

01-21-2015, 12:51 PM	#15
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1962 C10 Custom Cab Question Here's one from BJ Auction Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-21-2015, 07:38 PM	#17
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 1962 C10 Custom Cab Question My guess is its not a 327, I havent seen an original air cleaner like that on a C10 before. And as far as I know you couldnt get a 327 in any half ton until 66

01-21-2015, 08:58 PM	#18
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: 1962 C10 Custom Cab Question Yes, the round oil bath on the left is correct for 62 283. Your engine would have been a 2 barrel though. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.