AZ 68 1 ton Dually Chassis 175" W.B. $750 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cooperhw · 01-21-2015, 04:06 PM

Anybody out there have any interest in a 175" W.B. One ton Dually chassis?This is a 68 installed under an "Open Road" motorhome. Very clean, 61,000 miles. Coach builder installed a 18" extension in frame to a 157" factory long frame. Cab-n-chassis style. Front end and rear end are perfect. 457 gear ratio.
Asking $750.00 O.B.O.
Might be able to be used under a quad cab truck.
Wayne

**special-K** · 01-21-2015, 10:23 PM

Is it stretched, or did you mean 157"?

cooperhw · 01-21-2015, 10:55 PM

Quote:

Originally Posted by special-K

Is it stretched, or did you mean 157"?

Like I said in my original post. It started life at the factory at 157". Open road stretched it an additional 18" out to 175".

It's longgggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg

**special-K** · 01-22-2015, 07:23 AM

DOH!! Now I feel dumb when I was just trying to help. I guess I should read the whole dang thing! Sometimes I think I may be somewhat dyslexic and when I saw the two numbers swapped I wondered if you might have made the same kind of mistake I make sometimes. Oh well, I guess I'm the only defective one here...bummer

I'd think this frame could be shortened to the 133"WB if anyone wants to build a dually PU. even if no one has the need for the longer length. For that matter, I don't see why it couldn't be shortened to 127" to take a regular bed. Again, just trying to help (hopefully?)

cooperhw · 01-22-2015, 10:28 AM

Quote:

Originally Posted by special-K

DOH!! Now I feel dumb when I was just trying to help. I guess I should read the whole dang thing! Sometimes I think I may be somewhat dyslexic and when I saw the two numbers swapped I wondered if you might have made the same kind of mistake I make sometimes. Oh well, I guess I'm the only defective one here...bummer

I'd think this frame could be shortened to the 133"WB if anyone wants to build a dually PU. even if no one has the need for the longer length. For that matter, I don't see why it couldn't be shortened to 127" to take a regular bed. Again, just trying to help (hopefully?)

No worries. I agree. Just trying to reach out there and see if someone has a need for it. It could be shortened into any configuration needed.
Have a good one,

**67 cst swb** · 01-22-2015, 04:23 PM

You are selling just the chassis?
or are you selling what is in the picture, including cab, etc...

cooperhw · 01-23-2015, 10:10 PM

Just the chassis for the listed price.

**nlped** · 01-24-2015, 12:35 PM

Bump for you... I hope you can get it sold

cooperhw · 01-29-2015, 11:22 AM

Price too high?

really just wanting to pass this chassis along intact to someone wanting to build a crewcab or ramp truck.

Hate to bust it up. May just have to haul it up to my mountain property and let er simmer a bit. Don't cost nuthin to sit. Might figure out a use for it someday.

Anybody?

**special-K** · 01-30-2015, 11:49 PM

Quote:

Originally Posted by cooperhw

Price too high?

really just wanting to pass this chassis along intact to someone wanting to build a crewcab or ramp truck.

Hate to bust it up. May just have to haul it up to my mountain property and let er simmer a bit. Don't cost nuthin to sit. Might figure out a use for it someday.

Anybody?

I let a guy have an old crewcab parts truck who used it to build a mini Pete. I have a friend with a lumber business. they stretched a long 1t and added a tag axle with a 16' flatbed.

**michael bustamante** · 01-29-2015, 11:43 AM

great potental for a car hauler! i bet you need a city block to make a u turn

Leroy-B1 · 01-30-2015, 07:39 AM

Is any of sheet metal or are the seats in cab available?

cooperhw · 02-05-2015, 12:24 PM

Quote:

Originally Posted by Leroy-B1

Is any of sheet metal or are the seats in cab available?

I gave the seats to a friend of mine but he might be willing to sell them. How much they worth to you? plus you pay the freight.

Leroy-B1 · 02-06-2015, 05:01 AM

Not sure would like to see a pic of them first

01-21-2015, 04:06 PM	#1
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	68 1 ton Dually Chassis 175" W.B. $750 Anybody out there have any interest in a 175" W.B. One ton Dually chassis?This is a 68 installed under an "Open Road" motorhome. Very clean, 61,000 miles. Coach builder installed a 18" extension in frame to a 157" factory long frame. Cab-n-chassis style. Front end and rear end are perfect. 457 gear ratio. Asking $750.00 O.B.O. Might be able to be used under a quad cab truck. Wayne Attached Images __________________ "Life is too short to drive a boring vehicle". Later, Wayne

01-21-2015, 10:23 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 68 1 ton Dually Chassis 175" W.B. $750 Is it stretched, or did you mean 157"? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-22-2015, 07:23 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 68 1 ton Dually Chassis 175" W.B. $750 DOH!! Now I feel dumb when I was just trying to help. I guess I should read the whole dang thing! Sometimes I think I may be somewhat dyslexic and when I saw the two numbers swapped I wondered if you might have made the same kind of mistake I make sometimes. Oh well, I guess I'm the only defective one here...bummer I'd think this frame could be shortened to the 133"WB if anyone wants to build a dually PU. even if no one has the need for the longer length. For that matter, I don't see why it couldn't be shortened to 127" to take a regular bed. Again, just trying to help (hopefully?) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-22-2015, 04:23 PM	#6
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 68 1 ton Dually Chassis 175" W.B. $750 You are selling just the chassis? or are you selling what is in the picture, including cab, etc... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-23-2015, 10:10 PM	#7
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: 68 1 ton Dually Chassis 175" W.B. $750 Just the chassis for the listed price. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

01-24-2015, 12:35 PM	#8
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 68 1 ton Dually Chassis 175" W.B. $750 Bump for you... I hope you can get it sold __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-29-2015, 11:22 AM	#9
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: 68 1 ton Dually Chassis 175" W.B. $750 Price too high? really just wanting to pass this chassis along intact to someone wanting to build a crewcab or ramp truck. Hate to bust it up. May just have to haul it up to my mountain property and let er simmer a bit. Don't cost nuthin to sit. Might figure out a use for it someday. Anybody? __________________ "Life is too short to drive a boring vehicle". Later, Wayne

01-29-2015, 11:43 AM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 68 1 ton Dually Chassis 175" W.B. $750 great potental for a car hauler! i bet you need a city block to make a u turn __________________ 1967custom

01-30-2015, 07:39 AM	#12
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 68 1 ton Dually Chassis 175" W.B. $750 Is any of sheet metal or are the seats in cab available?

02-06-2015, 05:01 AM	#14
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 68 1 ton Dually Chassis 175" W.B. $750 Not sure would like to see a pic of them first



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.