Larger front brake rotors

[adricar1]

I am fitting cpp modular spindles, does anyone know of a large brake rotor that will fit the standard hub assembly. I have a set of large 4 pot calipers from a mustang which is was hoping to find a disc /rotor to use.I have 20 inch rims so i should be ok for clearance, i was just looking for an OE disc which would fit the hub, Any one have any ideas?

[Mike C]

CPP sells a big brake kit for your Modular Spindles. That's probably your only option. I see in the UK looks like you were hoping for an auto parts store option, and I don't know of any 13" or larger rotor with 5 on 5 bolt pattern.

You can find something and have the pilot modified as well as the bolt pattern redrilled, but what's it worth to you?

[Andy4639]

I have looked and never found anything to use. The stock spindles don't have enough off set to mount anything bigger.

If you are installing the cpp modular spindles you should be good to go with any of these kits.

As stated CCP, McGaughys , Wilwood all have them.

[sprint_9]

For a stock style replacement with the added flare of slotted and coated rotors I went with Brakeperformance.com I havent used them yet but they seem to be a nice product if you want to stay within the more stock spectrum. The only grip I have is the coating has some imperfections in spots, Im super picky though.

I should note that these are stock rotor dimensions.

[adricar1]

i was looking at a rear disc on the front from wilwood but unfortunately they are only 12.19 inch diameter. There must be a large rear disc out there ? most of the cpp kits come with the spindles , and i have already bought them . thanks guys i will keep looking.

[Andy4639]

I'm confused now! What is it you want. These are 13" rotor's.

1st post

I am fitting cpp modular spindles, does anyone know of a large brake rotor that will fit the standard hub assembly.

Last post:

i was looking at a rear disc on the front from wilwood but unfortunately they are only 12.19 inch diameter.

Call 602-258-0088 w/ Questions

Fits: 2WD 1/2 Ton - 17" + Wheels - 5 x 5

1973 - 1987 Chevy C-10
1973 - 1987 GMC C-10 / C-15
Note:

Front Drop - 2 ½”
Must use 17" or larger wheels
Includes:

2.5" Classic Drop Spindles
Hubs
13" GM SOLID Rotors
Massive GM Calipers
Brackets
Bearings
Seals
Hoses
Dust Caps
Spindle Nuts / Washers
Banjo Bolts
Cotter Pins
Manufactured by: McGaughys in the USA

[adricar1]

Hi Andy
a rear brake rotor would fit onto the front hub, so thats what i was thinking.
i already have the dropped spindles and the brake kits i have seen do not come without the spindles . unless they are the mega expensive wilwood. i have some brand new 4 pot calipers from a mustang which i could make a bracket to fit the spindle, the problem is finding a rotor (brake disc).

[Mike C]

I would think CPP would be happy to put together a kit for you without the spindles. Shoot them an email and tell them you already have them and ask about buying the balance of the kit.

Personally, a whole lot of money and not a whole lot of gain for an inch of rotor. YMMV as usual though.

[adricar1]

Andy i just noticed you have 73 where also the same. when i put that rather than 71 and 72 in to the search engine there are allot more options