NE Gauging Interest on 1967 GMC Super Custom Door Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 02-06-2015, 06:48 PM

I am planning on having SMS heat press some interior door panels for my build and wanted to see if anyone else might be interested in getting some also. To my knowledge no one reproduces the GMC since they're different that the Chevy CST. I talked to SMS and they were thinking around $400 a pair to press them in whatever color you'd like but we might be able to get them cheaper if there's a large group order. Let me know if anyone is interested and for how many sets. Thanks!

**jmader** · 02-08-2015, 10:37 AM

Ttt. Anyone have opinions on this? Is $400 too much?

1968aj · 02-22-2015, 08:50 PM

Quote:

Originally Posted by jmader

Ttt. Anyone have opinions on this? Is $400 too much?

looked like he was asking for opinions. my mistake? anyway I hope there is a lot of interest in them .

**jmader** · 02-13-2015, 09:07 AM

Ttt

**special-K** · 02-13-2015, 09:23 AM

I don't think $400 is too much to have original looking door panels custom made. I would get some, but my '67 is going in a mild custom direction. $400 might be too much for many,though. It seems with the internet there are many who feel restoration is something to bargain hunt, when just having what you need for any cost is how it always was

**jmader** · 02-14-2015, 12:50 PM

Quote:

Originally Posted by special-K

I don't think $400 is too much to have original looking door panels custom made. I would get some, but my '67 is going in a mild custom direction. $400 might be too much for many,though. It seems with the internet there are many who feel restoration is something to bargain hunt, when just having what you need for any cost is how it always was

Thanks for your input. Anyone else?

**lolife99** · 02-14-2015, 12:54 PM

Is $400 just for a sheet of heat pressed material?
Or a set of ready to install door panels?

**jmader** · 02-14-2015, 12:57 PM

No unfortunately it's just the heat pressed vinyl.

Vintage Windmills · 02-20-2015, 10:21 PM

bump

1968aj · 02-20-2015, 11:47 PM

I had bench seat recovered and repaired, custom door panel to match and visors recovered for $500.

**jmader** · 02-21-2015, 03:37 AM

Quote:

Originally Posted by 1968aj

I had bench seat recovered and repaired, custom door panel to match and visors recovered for $500.

Was that through SMS?

Vintage Windmills · 02-21-2015, 12:57 PM

Quote:

Originally Posted by 1968aj

I had bench seat recovered and repaired, custom door panel to match and visors recovered for $500.

Did that involve heat pressing or was it using off the shelf vinyl?

1968aj · 02-21-2015, 01:55 PM

Quote:

Originally Posted by vintage windmills

did that involve heat pressing or was it using off the shelf vinyl?

this was recover at upholstry shop. $400 seems a little extreme for a pair of door panels to me. But im no expert.

scotts72heavyhalf · 02-21-2015, 02:49 PM

SMS is less than a mile from my house and I have bought all my seat material from them and seen their work on their door panels, usually the panels are on backer board and finished by them but the wait is long, I would expect 4-6 months due to back orders as they do so much custom work. I would be happy to ask about a group order I know the owner pretty well.

Scott

**jmader** · 02-22-2015, 02:13 PM

Quote:

Originally Posted by scotts72heavyhalf

SMS is less than a mile from my house and I have bought all my seat material from them and seen their work on their door panels, usually the panels are on backer board and finished by them but the wait is long, I would expect 4-6 months due to back orders as they do so much custom work. I would be happy to ask about a group order I know the owner pretty well.

Scott

I figured that it would be a few months before they could get to it. I would really appreciate if you could talk to the owner for me although it sounds like there might not be enough interest to do a very big group order. Any help would be great though.

**special-K** · 02-22-2015, 09:24 AM

Quote:

Originally Posted by 1968aj

I had bench seat recovered and repaired, custom door panel to match and visors recovered for $500.

But you didn't get custom made to match factory one year only lower production door panels, right? Got pictures? A shop can only buy factory repro for so cheap. My stitch is nowhere that cheap for custom or out of the box. Let's compare apples to apples if we post here. I would buy some, but don't take it as a commitment. I don't need any now but would want to have some for future projects in case they ended up only a short run

75gmc454 · 02-21-2015, 08:52 PM

I would be interested in the door panels and the correct style seat covers for my 67. Here is a pic of the interior.

**jmader** · 02-22-2015, 02:17 PM

Quote:

Originally Posted by 75gmc454

I would be interested in the door panels and the correct style seat covers for my 67. Here is a pic of the interior.

Thanks for the picture. Hopefully we can work something out as a group. If I remember correctly SMS can't make the actual seat covers but I did have then heat press some fawn colored vinyl for my local upholstery shop to make the covers for me. I don't remember right off hand how much they charged for the material but could go back and look through my records.

1968aj · 02-22-2015, 10:49 AM

don't have pictures. sold the truck. like I said im no expert but there are no door panels worth that much to me. op asked for opinions and I gave mine.

**special-K** · 02-22-2015, 07:55 PM

Quote:

Originally Posted by 1968aj

don't have pictures. sold the truck. like I said im no expert but there are no door panels worth that much to me. op asked for opinions and I gave mine.

It's all good and I would be done, but he didn't ask for opinions. He is asking for interest. He also said "around 400" and that was just one set. Think prototype. Same as custom machining, printing business cards, t-shirts,etc. The first one gets charged the set-up fee.

Anyway, sorry for the distraction. If you want to count me in you can, just to see where this can go buying in a group. Who knows, with plenty f interest that cost could be cut drastically. If I don't use them I am sure I will find someone glad to have them

chewychevy67 · 02-22-2015, 06:24 PM

They made my 68 style seat covers and full interior. All heat pressed. Canadian gmc trucks have the chevy style door vinyl though.

**special-K** · 02-23-2015, 01:03 AM

Ok, my bad. I read his initial post and replied. we.re good. I don't think there's anyone who doesn't think it's a lot of money, especially my broke butt. But I'm a fool for the differences in GMC and will find a way to get such things no matter what.

I hope more show interest here. I would reconsider my original plans if I could get these. One thing for sure. We are bumping this to the top each time

Vintage Windmills · 02-23-2015, 11:01 AM

These panels are correct for the mid level trim package ("Custom") as well. In fact the door panel pictured above is from my 67 GMC "Custom".

Hoping we get more interest so the price to be factory correct is more affordable

**jmader** · 02-23-2015, 03:29 PM

Good point Jud. I should have said that earlier.

**jmader** · 02-25-2015, 12:38 PM

Top

02-06-2015, 06:48 PM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Gauging Interest on 1967 GMC Super Custom Door Panels I am planning on having SMS heat press some interior door panels for my build and wanted to see if anyone else might be interested in getting some also. To my knowledge no one reproduces the GMC since they're different that the Chevy CST. I talked to SMS and they were thinking around $400 a pair to press them in whatever color you'd like but we might be able to get them cheaper if there's a large group order. Let me know if anyone is interested and for how many sets. Thanks! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-08-2015, 10:37 AM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Ttt. Anyone have opinions on this? Is $400 too much? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-13-2015, 09:07 AM	#4
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Ttt __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-13-2015, 09:23 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Gauging Interest on 1967 GMC Super Custom Door Panels I don't think $400 is too much to have original looking door panels custom made. I would get some, but my '67 is going in a mild custom direction. $400 might be too much for many,though. It seems with the internet there are many who feel restoration is something to bargain hunt, when just having what you need for any cost is how it always was __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-14-2015, 12:54 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,698	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Is $400 just for a sheet of heat pressed material? Or a set of ready to install door panels? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-14-2015, 12:57 PM	#8
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Gauging Interest on 1967 GMC Super Custom Door Panels No unfortunately it's just the heat pressed vinyl. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-20-2015, 10:21 PM	#9
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gauging Interest on 1967 GMC Super Custom Door Panels bump __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-20-2015, 11:47 PM	#10
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: Gauging Interest on 1967 GMC Super Custom Door Panels I had bench seat recovered and repaired, custom door panel to match and visors recovered for $500.

02-21-2015, 02:49 PM	#14
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Gauging Interest on 1967 GMC Super Custom Door Panels SMS is less than a mile from my house and I have bought all my seat material from them and seen their work on their door panels, usually the panels are on backer board and finished by them but the wait is long, I would expect 4-6 months due to back orders as they do so much custom work. I would be happy to ask about a group order I know the owner pretty well. Scott __________________ Scotts72C10

02-21-2015, 08:52 PM	#17
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Gauging Interest on 1967 GMC Super Custom Door Panels I would be interested in the door panels and the correct style seat covers for my 67. Here is a pic of the interior.

02-22-2015, 10:49 AM	#19
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: Gauging Interest on 1967 GMC Super Custom Door Panels don't have pictures. sold the truck. like I said im no expert but there are no door panels worth that much to me. op asked for opinions and I gave mine.

02-22-2015, 06:24 PM	#21
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,490	Re: Gauging Interest on 1967 GMC Super Custom Door Panels They made my 68 style seat covers and full interior. All heat pressed. Canadian gmc trucks have the chevy style door vinyl though.

02-23-2015, 01:03 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Ok, my bad. I read his initial post and replied. we.re good. I don't think there's anyone who doesn't think it's a lot of money, especially my broke butt. But I'm a fool for the differences in GMC and will find a way to get such things no matter what. I hope more show interest here. I would reconsider my original plans if I could get these. One thing for sure. We are bumping this to the top each time __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-23-2015, 11:01 AM	#23
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gauging Interest on 1967 GMC Super Custom Door Panels These panels are correct for the mid level trim package ("Custom") as well. In fact the door panel pictured above is from my 67 GMC "Custom". Hoping we get more interest so the price to be factory correct is more affordable __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-23-2015, 03:29 PM	#24
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Good point Jud. I should have said that earlier. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)



Register or Log In To remove these advertisements.

02-25-2015, 12:38 PM	#25
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Gauging Interest on 1967 GMC Super Custom Door Panels Top __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

Register or Log In To remove these advertisements.