Refurbished console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 02-15-2015, 02:56 PM

As title states I bought a 72 truck console off a fellow member here and our local club. It wasn't in the best of shape but it was complete. I asked around on here about getting it refurbished with not much luck are they either wanted $400.00-$500.00 to do what I wanted. Couldn't see that much money in it.
I sat on it for a while trying to decide what to do. I looked at new ones also but finally found another local member of our truck club who said he would try it. I can't get over how well it turned out, he did amazing job on it and it cost me only $120.00 on top of that!
No it's not 72 spec's but it's fiber glassed with all the cracks fixed and painted. I cleaned up all the trim, brackets and placed new S/S hardware and screws in it. It houses two amps now and I think it looks killer in the truck! I really think it turned out great. Here are a few pictures of it before and after.

hamjet · 02-15-2015, 05:26 PM

Nice job Andy, looks super!!!

Andy4639 · 02-15-2015, 07:24 PM

Thanks!

Tinkermc · 02-15-2015, 08:59 PM

Very nice and adds value

leftybass209 · 02-15-2015, 09:10 PM

It helps add fluidity to your interior. Nice!

RUN GMC · 02-15-2015, 09:51 PM

Andy very nice ......where did you get the cup holder insert at?

Andy4639 · 02-15-2015, 11:31 PM

Thanks everyone. I just wished I could have drove it tonight to work but with the weather they are calling for I didn't!

Quote:

Originally Posted by RUN GMC

Andy very nice ......where did you get the cup holder insert at?

From Frank Truckguy on here.
Not my picture.

http://67-72chevytrucks.com/vboard/s....php?p=5452434

Andy4639 · 02-17-2015, 02:47 AM

Ok sorry guy's Couldn't see the other pictures here at work because of them being on FB. So I re did them straight to here.

02-15-2015, 02:56 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Refurbished console As title states I bought a 72 truck console off a fellow member here and our local club. It wasn't in the best of shape but it was complete. I asked around on here about getting it refurbished with not much luck are they either wanted $400.00-$500.00 to do what I wanted. Couldn't see that much money in it. I sat on it for a while trying to decide what to do. I looked at new ones also but finally found another local member of our truck club who said he would try it. I can't get over how well it turned out, he did amazing job on it and it cost me only $120.00 on top of that! No it's not 72 spec's but it's fiber glassed with all the cracks fixed and painted. I cleaned up all the trim, brackets and placed new S/S hardware and screws in it. It houses two amps now and I think it looks killer in the truck! I really think it turned out great. Here are a few pictures of it before and after. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-15-2015, 05:26 PM	#2
hamjet Registered User Join Date: Apr 2013 Location: South Westerlo, New York Posts: 1,325	Re: Refurbished console Nice job Andy, looks super!!! __________________ Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.

02-15-2015, 07:24 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Refurbished console Thanks! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-15-2015, 08:59 PM	#4
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Refurbished console Very nice and adds value

02-15-2015, 09:10 PM	#5
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: Refurbished console It helps add fluidity to your interior. Nice!

02-15-2015, 09:51 PM	#6
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: Refurbished console Andy very nice ......where did you get the cup holder insert at? __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

02-17-2015, 02:47 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Refurbished console Ok sorry guy's Couldn't see the other pictures here at work because of them being on FB. So I re did them straight to here. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.